$10 Loads of oem parts

Brule · 11-30-2019, 02:57 PM

I have alot of spare parts im going to take to the tip before Christmas.

If you want anything you can have it for the shipping price +$10 or something for wrapping it and sending it.

Im in Darwin so small things cost around $25, anything that cant be sent by auspost will cost over $100 normally.

List of item is massive heres some:
Inlet manifold
Lpfp bucket with siezed motor
Engine oil cooler complete set to from no oil cooler
Oil cooler housing complete set
Outlet pipe with dent removed
Steering fluid container and hoses
Air filter box
4 oem turbos (can send straight to RB or pure to save shipping, will not send to china turbo vtt sorry)
Water overflow tank stock side
Valve cover
Set of turbo oil and water lines
Ac compressor
Starter motor
Engine mount not sure which side
Hpfp rail
Water pipe aluminium one that bolts to block
Oem turbo heat shield that screw to block
Vacuum canisters

All going to the tip next wknd

Socket · 11-30-2019, 04:12 PM

It’s a sad day to see all this go to the tip mate.

Aus335iguy · 12-01-2019, 04:34 AM

I actually need a set of boost solenoids if you got em ?

haokoa · 12-01-2019, 05:09 AM

Quote:

Originally Posted by Socket

It’s a sad day to see all this go to the tip mate.

+1

Brule · 12-01-2019, 05:13 AM

Got 3 or 4.
Ill send 2 if you need some.

vtl · 12-01-2019, 03:39 PM

Pmed

jzx_andy · 12-01-2019, 09:54 PM

PM sent

Brule · 12-02-2019, 01:50 AM

Allright got a fair few pms.
Got a fair few wanting the same thing.
Outlet pipe
Turbos
Coolant pipe
Turbo lines

kookie · 12-02-2019, 02:26 PM

Anything even left?
why so sneaky with the PM's?

Raffle?

E85 335 · 12-03-2019, 02:22 AM

can I buy the valve cover?

BSG335 · 12-03-2019, 11:24 PM

Hey Brule can I hit you up for a couple of boost solenoids if available please?

Brule · 12-04-2019, 01:53 AM

I will sort all the requests out on the wknd.

First in can have what they requested.
I need time to write everyones name down and part.

Brule · 12-04-2019, 01:55 AM

This is whats left:

Steering fluid
Air filter
Water overflow tank
Ac compressor
Starter motor
Vacuum cannisters

Brule · 12-07-2019, 12:54 AM

cleaned up took alot to the tip.

found a couple of things someone may want.

Driveshaft adapter to n54 manual transmission to dana spicer 75x75 flange. This means you can get a 1000hp driveshaft for around $1200 in Australia.

Full n54 wiring loom. Come off 2008 1m.
has 1 bit cut off not sure what it is to be honest.

photos below

Brule · 12-07-2019, 12:57 AM

Everything else is in the tip or already taken.

loom and driveshaft adapter $100 each. + shipping.

Brule · 12-07-2019, 08:27 PM

Allright sending gear tomorrow.

Now Ive stuffed up by taking inlet manifold to tip and promising oil and water lines to 2 people. Vtl and jxandy. I have nearly 2 sets and only 1 oil drain.

Fight for what you want if you want particular oil or water line. Hopefully everyone will be happy.

Still have driveshaft adapter and loom.

Aus335iguy · 12-08-2019, 05:04 AM

Sorry Brule... Did i get the solenoids ? Sent you a PM the other day but I hadn't heard back. Thanks mate

Brule · 12-08-2019, 03:34 PM

Yep i got 2 that I had on my car. They were new literally did 2 events and a few drag races. 2 years old.
Cost around $20 shipped.

dyrus587 · 12-08-2019, 04:52 PM

Quote:

Originally Posted by Brule

Yep i got 2 that I had on my car. They were new literally did 2 events and a few drag races. 2 years old.
Cost around $20 shipped.

Boost solenoid?

Aus335iguy · 12-08-2019, 10:04 PM

Quote:

Originally Posted by Brule

Yep i got 2 that I had on my car. They were new literally did 2 events and a few drag races. 2 years old.
Cost around $20 shipped.

Send us your PayPal and I'll send you shipping details thanks mate

Brule · 12-14-2019, 01:59 PM

Everyones stuff is sent except 1 from Perth.
Pmd to get your address then ill send it Monday its wrapped ready to go.

Aus335iguy · 12-14-2019, 10:29 PM

Wanted to say thanks again Brule
This is the second time you've helped me out. You're a gentleman !
Best of luck with your build.

11-30-2019, 02:57 PM	#1
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	$10 Loads of oem parts I have alot of spare parts im going to take to the tip before Christmas. If you want anything you can have it for the shipping price +$10 or something for wrapping it and sending it. Im in Darwin so small things cost around $25, anything that cant be sent by auspost will cost over $100 normally. List of item is massive heres some: Inlet manifold Lpfp bucket with siezed motor Engine oil cooler complete set to from no oil cooler Oil cooler housing complete set Outlet pipe with dent removed Steering fluid container and hoses Air filter box 4 oem turbos (can send straight to RB or pure to save shipping, will not send to china turbo vtt sorry) Water overflow tank stock side Valve cover Set of turbo oil and water lines Ac compressor Starter motor Engine mount not sure which side Hpfp rail Water pipe aluminium one that bolts to block Oem turbo heat shield that screw to block Vacuum canisters All going to the tip next wknd
	Appreciate 0 Tweet Quote

11-30-2019, 04:12 PM	#2
Socket Lieutenant General 4542 Rep 11,903 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	It’s a sad day to see all this go to the tip mate.
	Appreciate 0 Quote

12-01-2019, 04:34 AM	#3
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	I actually need a set of boost solenoids if you got em ? __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

12-01-2019, 05:13 AM	#5
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Got 3 or 4. Ill send 2 if you need some.
	Appreciate 0 Quote

12-01-2019, 03:39 PM	#6
vtl Brigadier General 1493 Rep 3,148 Posts Drives: 2008 BMW 135i MT Join Date: Apr 2015 Location: Melbourne, Australia iTrader: (0)	Pmed __________________ Build Thread
	Appreciate 0 Quote

12-01-2019, 09:54 PM	#7
jzx_andy Slowpoke 245 Rep 291 Posts Drives: 2008 E92 335i N54 Join Date: Jul 2018 Location: Perth, Australia iTrader: (0)	PM sent __________________ build thread - OEM+ WIDEBODY \| Factory Individual Audio, Active Steering, Comfort Access & M-Sport optioned 6MT swapped \| Xtreme twin disk & SMF \| Advan RSII \| ST XTA \| F82 M4 heated front seats \| BMW Individual interior trims \| CIC/Combox retrofits \| Custom headlights \| 1M/M3 mirrors \| 335is auxiliary radiator \| LCI tails
	Appreciate 0 Quote

12-02-2019, 01:50 AM	#8
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Allright got a fair few pms. Got a fair few wanting the same thing. Outlet pipe Turbos Coolant pipe Turbo lines
	Appreciate 0 Quote

12-02-2019, 02:26 PM	#9
kookie Lieutenant 73 Rep 455 Posts Drives: e93 335i Join Date: Mar 2010 Location: Melbourne iTrader: (2)	Anything even left? why so sneaky with the PM's? Raffle?
	Appreciate 0 Quote

12-03-2019, 02:22 AM	#10
E85 335 First Lieutenant 55 Rep 331 Posts Drives: BMW 2006 E92 335i Coupe Join Date: Dec 2015 Location: Gold Coast iTrader: (0)	can I buy the valve cover? __________________ Aussie e92 335i. Pure Stage 2 Twin Turbos, Pure Performance Motorsport's Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, PRP Coil Kit, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
	Appreciate 0 Quote

12-03-2019, 11:24 PM	#11
BSG335 Driving in the slow lane 29 Rep 210 Posts Drives: E92 N54 Join Date: Aug 2017 Location: Sydney iTrader: (0)	Hey Brule can I hit you up for a couple of boost solenoids if available please?
	Appreciate 0 Quote

12-04-2019, 01:53 AM	#12
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	I will sort all the requests out on the wknd. First in can have what they requested. I need time to write everyones name down and part.
	Appreciate 0 Quote

12-04-2019, 01:55 AM	#13
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	This is whats left: Steering fluid Air filter Water overflow tank Ac compressor Starter motor Vacuum cannisters
	Appreciate 0 Quote

12-07-2019, 12:54 AM	#14
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	cleaned up took alot to the tip. found a couple of things someone may want. Driveshaft adapter to n54 manual transmission to dana spicer 75x75 flange. This means you can get a 1000hp driveshaft for around $1200 in Australia. Full n54 wiring loom. Come off 2008 1m. has 1 bit cut off not sure what it is to be honest. photos below Attached Images
	Appreciate 0 Quote

12-07-2019, 12:57 AM	#15
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Everything else is in the tip or already taken. loom and driveshaft adapter $100 each. + shipping.
	Appreciate 0 Quote

12-07-2019, 08:27 PM	#16
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Allright sending gear tomorrow. Now Ive stuffed up by taking inlet manifold to tip and promising oil and water lines to 2 people. Vtl and jxandy. I have nearly 2 sets and only 1 oil drain. Fight for what you want if you want particular oil or water line. Hopefully everyone will be happy. Still have driveshaft adapter and loom.
	Appreciate 0 Quote

12-08-2019, 05:04 AM	#17
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Sorry Brule... Did i get the solenoids ? Sent you a PM the other day but I hadn't heard back. Thanks mate __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

12-08-2019, 03:34 PM	#18
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Yep i got 2 that I had on my car. They were new literally did 2 events and a few drag races. 2 years old. Cost around $20 shipped.
	Appreciate 0 Quote

12-14-2019, 01:59 PM	#21
Brule Brigadier General 827 Rep 3,189 Posts Drives: 2007 335i e92 6spd man Join Date: Jul 2013 Location: Darwin iTrader: (0)	Everyones stuff is sent except 1 from Perth. Pmd to get your address then ill send it Monday its wrapped ready to go.
	Appreciate 1 jzx_andy245.00 Quote

12-14-2019, 10:29 PM	#22
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Wanted to say thanks again Brule This is the second time you've helped me out. You're a gentleman ! Best of luck with your build. __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote