Retrofit Flappy Paddles?

1 AKY · 01-07-2015, 03:19 PM

Sam / bajandrifter

To what extent are you able to retrofit the s/w with paddles without splicing into wires?

oldbilly · 01-08-2015, 04:12 AM

Just to clarify, I have 2006 330d pre-lci and have retro-fitted the 3 wire type paddles and they only work in d/s mode, will re-coding the autobox enable d/s and D shifting.

bajandrifter · 01-08-2015, 04:13 AM

Updating the software with winkfp worked for me. Just updating my cas as type

bajandrifter · 01-08-2015, 04:23 PM

Quote:

Originally Posted by 1 AKY

Sam / bajandrifter

To what extent are you able to retrofit the s/w with paddles without splicing into wires?

You can make a harnest by using oem parts and 22awg wire so you dont need to splice.

I didnt mind so i just spliced. But its very doable without splicing

bajandrifter · 01-08-2015, 04:26 PM

Its soooo worth it. Since sunday when i got mine workin in d mode, ive had a bit of fun but its also help me big time where i could down shift to overtake quickly and safely. And also today one idiot changed his mind when goin through an amber light. I had to brake hardly but then with two clicks i was down from 5th to 2nd and engine breaking helped me not to hit into the back of him!

laurentProd · 01-08-2015, 05:13 PM

Well no luck for me.
I can't find my Assembly No. anywhere in the GKExxx modules.

My assembly no. = 7592062
I found in GKE215 assembly no. 7592066 !

My gearbox software was updated on the 23.03.2009

@bajandrifter what have you done more? What do you mean by "Just updating my cas as type". Did you add an extra VO in the CAS module?

laurentProd · 01-08-2015, 05:18 PM

oh sorry! I found the VO to add : 7xa to the CAS module...

bajandrifter · 01-08-2015, 05:49 PM

Quote:

Originally Posted by laurentProd

oh sorry! I found the VO to add : 7xa to the CAS module...

add 7xa to the vo then default code the egs module. then you need to code the egs.

i use nsc dummy when im coding so i get the translations

you need the change the line PADDLE TYPE from wert_02(its automatically set to this one RESISTANCE BASED )

change to WERT_00 (SWITCH BASED).

bajandrifter · 01-08-2015, 05:54 PM

Also, You Do Not Need To Search For The Zubs No. Just Click Comfort Mode>update Zubs>select Gke215 For E.g Then>done>programzbus.

Then Winkfp Will Automatically Find Your Zubus Number And Link It With The Latest Update.
Thats It

bajandrifter · 01-08-2015, 05:57 PM

@bajandrifter What do you mean by "Just updating my cas as type".

I WAS ACTUALLY UPDATING MY CAS SOFTWARE TODAY AS I TYPED ON MY PHONE.

I SPENT 2 HOURS TODAY UPDATING ALL MY MODULES BAR THE AIRBAGS AND CIC(ALREADY DONE).

NOW ALL MY MODULES ARE UP TO DATE. INCLUDING DDE, DSC (SCARY!!!!! MOMENTS) AND CAS ETC.

laurentProd · 01-08-2015, 05:58 PM

No.. didn't work !!

- My paddle are switch based not resistors based
- I have added VO $7XA to CAS Module
- My EGS module was already set to PADDLE = wert_00
- EGS soft is from 03.2009

(I try to change to wert_1 and wert_02 but DS was no more available)

Still no luck... WTF !!

Could you share your EGS module TRC file please?

this is mine :

EL_INTERLOCK
aktiv
NIC
aktiv
ISO_OBD
wert_03
MIL_SCAN_TOOL
wert_04
PADDLES
wert_00
SEAT
wert_00
OBD_PFC
wert_00

laurentProd · 01-08-2015, 06:00 PM

Okay for the tip for updating with WINKFP...
I will try

laurentProd · 01-08-2015, 06:02 PM

Quote:

Originally Posted by bajandrifter

@bajandrifter What do you mean by "Just updating my cas as type".

I WAS ACTUALLY UPDATING MY CAS SOFTWARE TODAY AS I TYPED ON MY PHONE.

I SPENT 2 HOURS TODAY UPDATING ALL MY MODULES BAR THE AIRBAGS AND CIC(ALREADY DONE).

NOW ALL MY MODULES ARE UP TO DATE. INCLUDING DDE, DSC (SCARY!!!!! MOMENTS) AND CAS ETC.

All in 2 hours only!!??!
Why do people said that you need a whole night to do that + a power plug !!???!!!

bajandrifter · 01-09-2015, 02:20 AM

Quote:

Originally Posted by laurentProd

Well no luck for me.
I can't find my Assembly No. anywhere in the GKExxx modules.

My assembly no. = 7592062
I found in GKE215 assembly no. 7592066 !

My gearbox software was updated on the 23.03.2009

@bajandrifter what have you done more? What do you mean by "Just updating my cas as type". Did you add an extra VO in the CAS module?

I WAS USING V53 DATEN, MY EGS WAS UPDATED TO 2012. WHAT I ALSO TRIED WAS TO UPGRADE MY JBBE TO A "H2" (HIGH2) MODLE FROM A 2011 CAR. THE ONE THAT CAME WITH MY CAR WAS "L1" (LOW 1),

I DID THIS AGES AGO AND IT DIDNT WORK. IT ONLY WORKED AFTER UPDATING MY EGS SOFTWARE TO 2012.

LOOK AT MY VIDEO, WHEN IT GETS TO THE WINKFP SCREEN PAUSE IT AND REVIEW.

dy63 · 01-09-2015, 03:42 AM

Quote:

Originally Posted by bajandrifter

add 7xa to the vo then default code the egs module. then you need to code the egs.

i use nsc dummy when im coding so i get the translations

you need the change the line PADDLE TYPE from wert_02(its automatically set to this one RESISTANCE BASED )

change to WERT_00 (SWITCH BASED).

Bajan,

do you have push pull paddles? what paddles do you have LCI ones?

was wondering maybe thru coding can you make the pre lci paddles work is plus and minus shifting rather than push or pull each paddle

bajandrifter · 01-09-2015, 03:44 AM

Mate, look at my vid. I have lci - +.

Right is up left is down.

jammy78 · 01-09-2015, 07:22 AM

I've just got a set of Lci paddles & will attempt to make this modification!

bajandrifter · 01-09-2015, 07:36 AM

Quote:

Originally Posted by jammy78

I've just got a set of Lci paddles & will attempt to make this modification!

If your close to east london pm me

laurentProd · 01-09-2015, 04:32 PM

Goooooodd newwss everyoneeeee !!!!

after updating my EGS module I can now shift in D mode !!!!!!
hourrraaaaaaaaaaaaaa !!!

many thanks bajandrifter !!!

here is a pic of my setup :

https://flic.kr/p/qK6Eo5

paddles are from the latest 6 series.

makkan00 · 01-09-2015, 05:07 PM

Quote:

Originally Posted by laurentProd

Goooooodd newwss everyoneeeee !!!!

after updating my EGS module I can now shift in D mode !!!!!!
hourrraaaaaaaaaaaaaa !!!

many thanks bajandrifter !!!

here is a pic of my setup :

https://flic.kr/p/qK6Eo5

paddles are from the latest 6 series.

Fook,,,
I have been looking for those paddles for my 5 series .
Do you mind sharing from where you got those?

bajandrifter · 01-09-2015, 05:15 PM

Quote:

Originally Posted by laurentProd

Goooooodd newwss everyoneeeee !!!!

after updating my EGS module I can now shift in D mode !!!!!!
hourrraaaaaaaaaaaaaa !!!

many thanks bajandrifter !!!

here is a pic of my setup :

https://flic.kr/p/qK6Eo5

paddles are from the latest 6 series.

Good good good.
Enjoy as i surley do!!!!

laurentProd · 01-09-2015, 05:25 PM

Quote:

Originally Posted by makkan00

Fook,,,
I have been looking for those paddles for my 5 series .
Do you mind sharing from where you got those?

I got them from Ebay germany...
Let me check for u if I can find the seller again...

01-07-2015, 03:19 PM	#177
1 AKY Major 459 Rep 1,412 Posts Drives: F11 530d Join Date: Jul 2007 Location: UK iTrader: (1)	Sam / bajandrifter To what extent are you able to retrofit the s/w with paddles without splicing into wires?
	Appreciate 0 Quote

01-08-2015, 04:12 AM	#178
oldbilly Second Lieutenant 24 Rep 285 Posts Drives: 330d e91 M Sport Join Date: Apr 2012 Location: cambridgeshire iTrader: (2)	Just to clarify, I have 2006 330d pre-lci and have retro-fitted the 3 wire type paddles and they only work in d/s mode, will re-coding the autobox enable d/s and D shifting.
	Appreciate 0 Quote

01-08-2015, 04:13 AM	#179
bajandrifter YouTuber @SALVAGE NATION 15 Rep 193 Posts Drives: BMW 325I LCI E92 Join Date: Apr 2013 Location: east london iTrader: (0)	Updating the software with winkfp worked for me. Just updating my cas as type
	Appreciate 0 Quote

01-08-2015, 04:26 PM	#181
bajandrifter YouTuber @SALVAGE NATION 15 Rep 193 Posts Drives: BMW 325I LCI E92 Join Date: Apr 2013 Location: east london iTrader: (0)	Its soooo worth it. Since sunday when i got mine workin in d mode, ive had a bit of fun but its also help me big time where i could down shift to overtake quickly and safely. And also today one idiot changed his mind when goin through an amber light. I had to brake hardly but then with two clicks i was down from 5th to 2nd and engine breaking helped me not to hit into the back of him!
	Appreciate 0 Quote

01-08-2015, 05:13 PM	#182
laurentProd Private First Class 20 Rep 183 Posts Drives: E93 Join Date: Feb 2013 Location: France iTrader: (0)	Well no luck for me. I can't find my Assembly No. anywhere in the GKExxx modules. My assembly no. = 7592062 I found in GKE215 assembly no. 7592066 ! My gearbox software was updated on the 23.03.2009 @bajandrifter what have you done more? What do you mean by "Just updating my cas as type". Did you add an extra VO in the CAS module?
	Appreciate 0 Quote

01-08-2015, 05:18 PM	#183
laurentProd Private First Class 20 Rep 183 Posts Drives: E93 Join Date: Feb 2013 Location: France iTrader: (0)	oh sorry! I found the VO to add : 7xa to the CAS module...
	Appreciate 0 Quote

01-08-2015, 05:54 PM	#185
bajandrifter YouTuber @SALVAGE NATION 15 Rep 193 Posts Drives: BMW 325I LCI E92 Join Date: Apr 2013 Location: east london iTrader: (0)	Also, You Do Not Need To Search For The Zubs No. Just Click Comfort Mode>update Zubs>select Gke215 For E.g Then>done>programzbus. Then Winkfp Will Automatically Find Your Zubus Number And Link It With The Latest Update. Thats It
	Appreciate 0 Quote

01-08-2015, 05:57 PM	#186
bajandrifter YouTuber @SALVAGE NATION 15 Rep 193 Posts Drives: BMW 325I LCI E92 Join Date: Apr 2013 Location: east london iTrader: (0)	@bajandrifter What do you mean by "Just updating my cas as type". I WAS ACTUALLY UPDATING MY CAS SOFTWARE TODAY AS I TYPED ON MY PHONE. I SPENT 2 HOURS TODAY UPDATING ALL MY MODULES BAR THE AIRBAGS AND CIC(ALREADY DONE). NOW ALL MY MODULES ARE UP TO DATE. INCLUDING DDE, DSC (SCARY!!!!! MOMENTS) AND CAS ETC.
	Appreciate 0 Quote

01-08-2015, 05:58 PM	#187
laurentProd Private First Class 20 Rep 183 Posts Drives: E93 Join Date: Feb 2013 Location: France iTrader: (0)	No.. didn't work !! - My paddle are switch based not resistors based - I have added VO $7XA to CAS Module - My EGS module was already set to PADDLE = wert_00 - EGS soft is from 03.2009 (I try to change to wert_1 and wert_02 but DS was no more available) Still no luck... WTF !! Could you share your EGS module TRC file please? this is mine : EL_INTERLOCK aktiv NIC aktiv ISO_OBD wert_03 MIL_SCAN_TOOL wert_04 PADDLES wert_00 SEAT wert_00 OBD_PFC wert_00
	Appreciate 0 Quote

01-08-2015, 06:00 PM	#188
laurentProd Private First Class 20 Rep 183 Posts Drives: E93 Join Date: Feb 2013 Location: France iTrader: (0)	Okay for the tip for updating with WINKFP... I will try
	Appreciate 0 Quote

01-09-2015, 03:44 AM	#192
bajandrifter YouTuber @SALVAGE NATION 15 Rep 193 Posts Drives: BMW 325I LCI E92 Join Date: Apr 2013 Location: east london iTrader: (0)	Mate, look at my vid. I have lci - +. Right is up left is down.
	Appreciate 0 Quote

01-09-2015, 07:22 AM	#193
jammy78 Colonel 126 Rep 2,022 Posts Drives: F31 335D Join Date: Nov 2012 Location: Windsor iTrader: (21)	I've just got a set of Lci paddles & will attempt to make this modification!
	Appreciate 0 Quote

01-09-2015, 04:32 PM	#195
laurentProd Private First Class 20 Rep 183 Posts Drives: E93 Join Date: Feb 2013 Location: France iTrader: (0)	Goooooodd newwss everyoneeeee !!!! after updating my EGS module I can now shift in D mode !!!!!! hourrraaaaaaaaaaaaaa !!! many thanks bajandrifter !!! here is a pic of my setup : https://flic.kr/p/qK6Eo5 paddles are from the latest 6 series.
	Appreciate 0 Quote