[phil200tdi]

Very cheap solution for anyone wanting to run meth on their 335i (N54) without upgrading their charge pipe.

£60 plus postage

http://www.ardesign.info/store/ar-de...ous-elbow.html

[RagingKileak]

Hi Phil,

I take it this does NOT replace the whole oerm charge pipe then?

If it does then I'm interested.

Matt

[Josh1a1h]

Why the sale mate?

[phil200tdi]

This doesn't replace the chargepipe, just the rubber accordion section which connects to the intercooler pipe work.



My chargepipe had a crack at the throttle body and was popping off. I replaced it with a bms cp with integrated meth nozzle - hence this is no longer required. There is no performance gain from the new cp and I wouldn't have bothered otherwise!!

[idnan]

Originally Posted by phil200tdi

This doesn't replace the chargepipe, just the rubber accordion section which connects to the intercooler pipe work.

My chargepipe had a crack at the throttle body and was popping off. I replaced it with a bms cp with integrated meth nozzle - hence this is no longer required. There is no performance gain from the new cp and I wouldn't have bothered otherwise!!

FYI 2009 and onwards have a single piece chargepipe and don't have the accordion so this elbow won't fit.

[phil200tdi]

^ forgot about that!

Mine was just before this change - Nov 08. Do you know the date of the switch from short to long cp?

[RagingKileak]

Mine is a July 2009 build Phil and is deffo one piece, hence me checking.

Thanks anyway mate.

Matt

[idnan]

No idea mate, I think the best way to tell is to visually check.

[phil200tdi]

Added some pics

[phil200tdi]

Bump

[nicktyler]

I'm tempted by this but I know it will probably end up sitting in the garage while I'm too lazy to get the rest of the bits to make it work.

[phil200tdi]

Or buying this may give you the impetus you need to take the next step!