E90Post
 


Studio RSR
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > All COBB Tuning AccessPORT Flash for N54 335i Discussion Here



Reply
 
Thread Tools Search this Thread
      09-23-2013, 07:57 AM   #8229
135Pats
Major General
135Pats's Avatar
United_States
456
Rep
6,478
Posts

Drives: A few BMWs
Join Date: May 2012
Location: Maryland

iTrader: (3)

Quote:
Originally Posted by labedra View Post
Quick Question Been running Stage 2 (Stg2+FMIC ST Aggrssv IJE0S v402
Stock Throttle) for over couple of months and have been on track with it for (4) 30 min sessions. My temps hit 285 at one point and stayed around 280, but no limp mode detected. I heard that if the engine oil temps hit ~270 the car goes into limp mode. Does this OTS MAP eliminate limp mode or is the limp mode temp raised to something higher? My car is 2008 e92 manual gearbox, and ya i have stock oil cooler as well.
I don't think Cobb messes with heat related limp mode. In ATR you can hush up the IAT comp tables, but that’s more of a timing retard function, you wouldn’t limp from IAT unless things got crazy hot.
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586r Tial .82AR/Other stuff...652WHP

F30 N55 XDrive EBII
Appreciate 0
      09-23-2013, 02:28 PM   #8230
UMich_335i
Lieutenant
United_States
25
Rep
414
Posts

Drives: 2009 e90 335i
Join Date: Aug 2013
Location: Atlanta, GA

iTrader: (0)

Garage List
2009 BMW 335i  [0.00]
Just installed my Cobb v3 yesterday with the Stage 1 Aggressive map and aFe DCI. Only went out driving for a bit but the gains were VERY noticeable, also the turbo spool is significantly louder, sounds great. Tonight will be the Cobb fmic, er charge pipe, and Tial bov.
__________________
2009 e90 335i | AT | AG M590 | Conti DW | KW V1 | Lux | Akebono

e50 PTF Protune | Cobb FMIC | aFe DCI | VRSF DPs | ER CP | Tial BOV | Alpina Flash | Fuel-It Stg1 | RB PCV | Cobb Exhaust
Appreciate 0
      09-23-2013, 06:09 PM   #8231
Allen@MOTIV
38
Rep
634
Posts

Drives: 135i
Join Date: Jun 2013
Location: VA

iTrader: (0)

Quote:
Originally Posted by UMich_335i View Post
Just installed my Cobb v3 yesterday with the Stage 1 Aggressive map and aFe DCI. Only went out driving for a bit but the gains were VERY noticeable, also the turbo spool is significantly louder, sounds great. Tonight will be the Cobb fmic, er charge pipe, and Tial bov.
Things will only get better as you continue to add bolt-ons and supporting mods. E85 is available in certain areas of MD and if you are fortunate enough to have a local supply then things will really start to get fun
Appreciate 0
      09-24-2013, 07:24 AM   #8232
UMich_335i
Lieutenant
United_States
25
Rep
414
Posts

Drives: 2009 e90 335i
Join Date: Aug 2013
Location: Atlanta, GA

iTrader: (0)

Garage List
2009 BMW 335i  [0.00]
Looking forward to it Allen! May even make my way down to you guys from Frederick for a ProTune one of these days...

However, after last nights install (mods are in sig + stage 1+ aggressive maps) I have a strange whining noise that comes on above 11psi. It almost has the same tone as a supercharger pulley. Turbo spool is the only audible noise up until that boost pressure. I do not have any fault codes present and have not been able to get a log yet due to a late install.
__________________
2009 e90 335i | AT | AG M590 | Conti DW | KW V1 | Lux | Akebono

e50 PTF Protune | Cobb FMIC | aFe DCI | VRSF DPs | ER CP | Tial BOV | Alpina Flash | Fuel-It Stg1 | RB PCV | Cobb Exhaust
Appreciate 0
      09-24-2013, 08:37 AM   #8233
Aced16
Private First Class
9
Rep
167
Posts

Drives: 335i
Join Date: Jul 2011
Location: Maryland

iTrader: (1)

Hey Guys,
I have this annoying check engine light that wont go away. The car keeps triggering a P2C77. I went ahead and installed a new o2 since it was also getting a heater issue as well, and all that did was clear the heater issues. The code says something about post cat signal, anyone ever have this problem? Plugs are NGKs gapped accordingly with roughly 5k on them. I would appreciate any help!
__________________
The Old: DG G35 6mt coupe The New: AW 6mt E92 335i
Appreciate 0
      09-24-2013, 08:42 AM   #8234
135Pats
Major General
135Pats's Avatar
United_States
456
Rep
6,478
Posts

Drives: A few BMWs
Join Date: May 2012
Location: Maryland

iTrader: (3)

Quote:
Originally Posted by Aced16 View Post
Hey Guys,
I have this annoying check engine light that wont go away. The car keeps triggering a P2C77. I went ahead and installed a new o2 since it was also getting a heater issue as well, and all that did was clear the heater issues. The code says something about post cat signal, anyone ever have this problem? Plugs are NGKs gapped accordingly with roughly 5k on them. I would appreciate any help!
Which o2 did you swap out? Pre-cat or post-cat? They do completely different things…Good news is, if it’s just a post-cat o2, your car should run OK. The post-cat o2 measures converter readiness, it’s the lambda o2 that you really need in functioning order.
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586r Tial .82AR/Other stuff...652WHP

F30 N55 XDrive EBII
Appreciate 0
      09-24-2013, 10:49 AM   #8235
Aced16
Private First Class
9
Rep
167
Posts

Drives: 335i
Join Date: Jul 2011
Location: Maryland

iTrader: (1)

Quote:
Originally Posted by 135Pats View Post
Which o2 did you swap out? Pre-cat or post-cat? They do completely different things…Good news is, if it’s just a post-cat o2, your car should run OK. The post-cat o2 measures converter readiness, it’s the lambda o2 that you really need in functioning order.
I changed the o2 that is post cat on bank 1. The code reads something like this : Lambda probe after catalytic converter, Signal.
__________________
The Old: DG G35 6mt coupe The New: AW 6mt E92 335i
Appreciate 0
      09-24-2013, 08:28 PM   #8236
Quisp
Does not play well with others
United_States
80
Rep
1,787
Posts

Drives: BMW
Join Date: Apr 2007
Location: Arizona

iTrader: (4)

Trying to load maps on to a new V3 but have no clue what the letters on the map page on cobb website mean.
Looking for 2007 335i coupe maps. What are the letter code for?
IKBOS, ILAOS, ....? What do they mean?
__________________

Last edited by Quisp; 09-24-2013 at 08:34 PM..
Appreciate 0
      09-24-2013, 08:53 PM   #8237
UMich_335i
Lieutenant
United_States
25
Rep
414
Posts

Drives: 2009 e90 335i
Join Date: Aug 2013
Location: Atlanta, GA

iTrader: (0)

Garage List
2009 BMW 335i  [0.00]
Quote:
Originally Posted by Quisp View Post
Trying to load maps on to a new V3 but have no clue what the letters on the map page on cobb website mean.
Looking for 2007 335i coupe maps. What are the letter code for?
IKBOS, ILAOS, ....? What do they mean?
The v3 should have all of the latest maps already loaded on it. When you connect the AP to your car for the first time it will display the name of your DME (the letter code). Hope that helps!
__________________
2009 e90 335i | AT | AG M590 | Conti DW | KW V1 | Lux | Akebono

e50 PTF Protune | Cobb FMIC | aFe DCI | VRSF DPs | ER CP | Tial BOV | Alpina Flash | Fuel-It Stg1 | RB PCV | Cobb Exhaust
Appreciate 0
      09-24-2013, 08:55 PM   #8238
JStang
Brigadier General
JStang's Avatar
561
Rep
3,625
Posts

Drives: FDB M3 CS
Join Date: Dec 2010
Location: St. Petersburg, FL

iTrader: (9)

Quote:
Originally Posted by Quisp View Post
Trying to load maps on to a new V3 but have no clue what the letters on the map page on cobb website mean.
Looking for 2007 335i coupe maps. What are the letter code for?
IKBOS, ILAOS, ....? What do they mean?
That is your ROM version.
Appreciate 0
      09-25-2013, 07:12 AM   #8239
UMich_335i
Lieutenant
United_States
25
Rep
414
Posts

Drives: 2009 e90 335i
Join Date: Aug 2013
Location: Atlanta, GA

iTrader: (0)

Garage List
2009 BMW 335i  [0.00]
Cobb v3 AP

Is there a way to change the sample rate for logging on the v3 AP? I can only log 16 channels at a time, which isn't enough for the default list.
__________________
2009 e90 335i | AT | AG M590 | Conti DW | KW V1 | Lux | Akebono

e50 PTF Protune | Cobb FMIC | aFe DCI | VRSF DPs | ER CP | Tial BOV | Alpina Flash | Fuel-It Stg1 | RB PCV | Cobb Exhaust
Appreciate 0
      09-26-2013, 09:32 AM   #8240
UMich_335i
Lieutenant
United_States
25
Rep
414
Posts

Drives: 2009 e90 335i
Join Date: Aug 2013
Location: Atlanta, GA

iTrader: (0)

Garage List
2009 BMW 335i  [0.00]
Logs

If anyone could look at these logs to help me try to diagnose a "whine" I am hearing above 11psi it would be greatly appreciated. I could not see anything really stand out, but these are also the first logs I have looked at. Yes I left DTC On which I know is not ideal but I also did not notice any throttle closures.
Attached Files
File Type: zip 2009_e90_n54_DTC_On_130924.zip (18.6 KB, 57 views)
__________________
2009 e90 335i | AT | AG M590 | Conti DW | KW V1 | Lux | Akebono

e50 PTF Protune | Cobb FMIC | aFe DCI | VRSF DPs | ER CP | Tial BOV | Alpina Flash | Fuel-It Stg1 | RB PCV | Cobb Exhaust
Appreciate 0
      09-26-2013, 09:41 AM   #8241
135Pats
Major General
135Pats's Avatar
United_States
456
Rep
6,478
Posts

Drives: A few BMWs
Join Date: May 2012
Location: Maryland

iTrader: (3)

Quote:
Originally Posted by UMich_335i View Post
If anyone could look at these logs to help me try to diagnose a "whine" I am hearing above 11psi it would be greatly appreciated. I could not see anything really stand out, but these are also the first logs I have looked at. Yes I left DTC On which I know is not ideal but I also did not notice any throttle closures.
Please use Datazap and I will look it over.

http://datazap.me/
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586r Tial .82AR/Other stuff...652WHP

F30 N55 XDrive EBII
Appreciate 0
      09-28-2013, 08:36 AM   #8242
///M5Driver
First Lieutenant
30
Rep
307
Posts

Drives: gaggle of BMW's
Join Date: Aug 2013
Location: Leawood, KS

iTrader: (1)

Just received my V2 and installed Stage 1 Aggressive 4.01 and having the same problems as OP in this thread. Car runs great without AP and always has...is it map related or do I need to start swapping plugs and coils?

http://www.e90post.com/forums/showth...1#post14733041
Appreciate 0
      09-28-2013, 08:56 AM   #8243
135Pats
Major General
135Pats's Avatar
United_States
456
Rep
6,478
Posts

Drives: A few BMWs
Join Date: May 2012
Location: Maryland

iTrader: (3)

Pull the codes. Plugs and ignition coils are a good place to start though.
__________________
E88 N54 Alpinweiss/Coral Red/Motiv HTA 3586r Tial .82AR/Other stuff...652WHP

F30 N55 XDrive EBII
Appreciate 0
      09-28-2013, 09:48 AM   #8244
cwarren
Captain
cwarren's Avatar
82
Rep
725
Posts

Drives: 08 e92
Join Date: Jan 2012
Location: portland

iTrader: (1)

Quote:
Originally Posted by e46beater View Post
Just received my V2 and installed Stage 1 Aggressive 4.01 and having the same problems as OP in this thread. Car runs great without AP and always has...is it map related or do I need to start swapping plugs and coils?

http://www.e90post.com/forums/showth...1#post14733041
why running v4.01 the latest is 4.02 the earlier version had some heavy boost oscillation's/throttle closer issues might install latest maps and run some logs .
__________________
ptf MHD E85 /Hexon rr550 turbo's/PRE custom intakes/CP / bms dp's/hfs4 / er fmic/PSS/spec stage 2+/kwv2/steveAZ stage 3 lpfp /m3 control arms/powerflex black/MF LSD /fuel it port injection
Appreciate 0
      09-28-2013, 10:53 AM   #8245
///M5Driver
First Lieutenant
30
Rep
307
Posts

Drives: gaggle of BMW's
Join Date: Aug 2013
Location: Leawood, KS

iTrader: (1)

Quote:
Originally Posted by cwarren View Post
why running v4.01 the latest is 4.02 the earlier version had some heavy boost oscillation's/throttle closer issues might install latest maps and run some logs .
I only see 4.01 on their site for anything stage 1 minus FMIC
Appreciate 0
      09-28-2013, 04:03 PM   #8246
M3E46M
First Lieutenant
M3E46M's Avatar
United_States
16
Rep
328
Posts

Drives: 2008 BMW 335i E92 6 MT
Join Date: Jun 2009
Location: Somewhere on Planet Earth for now.

iTrader: (2)

At the track got the following codes

P114D
P2C7F
P29D1
P2ABC
P3100
P2C6B

Help all came on at same time no leaks, reset codes once drove 10 miles got on track codes came back all of them. When codes were reset everything worked fine but when codes came back limp mode and codes came back listed above.
__________________

.../// TURBO! Why in the world would you choose anything else?... ///
Appreciate 0
      09-28-2013, 04:47 PM   #8247
COBB Tuning
Major
COBB Tuning's Avatar
231
Rep
1,051
Posts

Drives: 335i
Join Date: Dec 2010
Location: Austin, TX

iTrader: (0)

Quote:
Originally Posted by UMich_335i View Post
Is there a way to change the sample rate for logging on the v3 AP? I can only log 16 channels at a time, which isn't enough for the default list.
The default list will log just fine. That being said, using 6 monitors for gauge view that are not on the default list basically adds another 6 channels, so you may run into issues. I would recommend either switching to a less amount of gauges while logging or changing some of the gauge monitors to be the same as those in the default list. This will effectively lower the number of total monitors being pulled from the DME.

-Josh
Appreciate 0
      09-28-2013, 04:51 PM   #8248
COBB Tuning
Major
COBB Tuning's Avatar
231
Rep
1,051
Posts

Drives: 335i
Join Date: Dec 2010
Location: Austin, TX

iTrader: (0)

Quote:
Originally Posted by labedra View Post
At the track got the following codes

P114D
P2C7F
P29D1
P2ABC
P3100
P2C6B

Help all came on at same time no leaks, reset codes once drove 10 miles got on track codes came back all of them. When codes were reset everything worked fine but when codes came back limp mode and codes came back listed above.
Looks like you have some misfires, post-cat O2 codes, and a MAP code. Have you done any new installs lately? With that big of a list, I'd assume an electrical issue, but it could be separate issues. You can find the code descriptions here:
http://www.bavauto.com/Assets/inst_pages/bas-sr300.pdf

-Josh
Appreciate 0
      09-28-2013, 04:53 PM   #8249
COBB Tuning
Major
COBB Tuning's Avatar
231
Rep
1,051
Posts

Drives: 335i
Join Date: Dec 2010
Location: Austin, TX

iTrader: (0)

Quote:
Originally Posted by e46beater View Post
I only see 4.01 on their site for anything stage 1 minus FMIC
Send me the logs and I can take a look for you.

josh.dankel@cobbtuning.com

-Josh
Appreciate 0
      09-28-2013, 06:15 PM   #8250
M3E46M
First Lieutenant
M3E46M's Avatar
United_States
16
Rep
328
Posts

Drives: 2008 BMW 335i E92 6 MT
Join Date: Jun 2009
Location: Somewhere on Planet Earth for now.

iTrader: (2)

Quote:
Originally Posted by COBB Tuning View Post
Looks like you have some misfires, post-cat O2 codes, and a MAP code. Have you done any new installs lately? With that big of a list, I'd assume an electrical issue, but it could be separate issues. You can find the code descriptions here:
http://www.bavauto.com/Assets/inst_pages/bas-sr300.pdf

-Josh
I changed the plugs, however i went 2 sessions without issues, 3rd session all codes. I reset the codes drove for a while no problem, then right when i enter the track codes again. So I reset ECU and woudln't reset so cleard the codes and loaded Stage 2 FMC Sport instead of Agressive. Drove for a while no codes. did 5 or 6 Open Throttle pulls no codes. Weird. I hope this is just a glitch. But got new plugs, thats it, however i never drove this hard as 2nd and 3rd session.

What could this bee, I didn't turn off traction control so maybe ECU freaked out?
__________________

.../// TURBO! Why in the world would you choose anything else?... ///
Appreciate 0
Reply

Bookmarks

Tags
135i cobb, 335i cobb, 535i cobb, accessport n54, bmw cobb, bmw cobb tuning, cobb 135i, cobb 335i, cobb 535i, cobb ap, cobb bmw, cobb n54, cobb tuning bmw, cobb tuning n54, cobb tuning n55, flash n54, flash n55, n54 accessport, n54 cobb, n54 cobb tuning, n54 flash, n54 flash tune, n55 cobb, n55 flash, n55 flash tune

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:43 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST