VTT upgraded PCV valve install question

tip_m · 05-26-2020, 11:47 PM

While doing the valve cover gasket I also decided to upgrade to Vargas Technologies PCV valve but I am having some fitment issues. ≈

Here is OEM one on top and VTT at bottom

OEM sits nice and flush inside the cap

But VTT one does not.

Do I need to trim the 4x tabs on the cap? I’m hesitant to do any permanent modifications and wanted to seek opinions. I did do a search and didn’t get any hits and apologize if this has been discussed before. Thanks

Rule1977 · 05-27-2020, 06:01 AM

Quote:

Originally Posted by tip_m

While doing the valve cover gasket I also decided to upgrade to Vargas Technologies PCV valve but I am having some fitment issues. ≈

Here is OEM one on top and VTT at bottom

OEM sits nice and flush inside the cap

But VTT one does not.

Do I need to trim the 4x tabs on the cap? I’m hesitant to do any permanent modifications and wanted to seek opinions. I did do a search and didn’t get any hits and apologize if this has been discussed before. Thanks

All upgraded PCV valves are this way. Put the PCV valve in first and then screw the cap on.

ian3924 · 05-27-2020, 10:01 AM

Soden82 · 05-27-2020, 12:45 PM

Typically you need to file the 4 tabs down on the cover. Depends on the PCV valve and what company makes it

tip_m · 05-31-2020, 06:50 PM

Thanks everyone, just a very minor trimming is all it took. Btw, the original PCV valve was gone at 80k miles

janpa7 · 10-07-2023, 06:25 PM

Quote:

Originally Posted by Rule1977

All upgraded PCV valves are this way. Put the PCV valve in first and then screw the cap on.

Did it fit in your case by using the method you describe ?

05-26-2020, 11:47 PM	#1
tip_m Enlisted Member 14 Rep 34 Posts Drives: 335i Join Date: Nov 2019 Location: Bay Area, CA iTrader: (0)	VTT upgraded PCV valve install question While doing the valve cover gasket I also decided to upgrade to Vargas Technologies PCV valve but I am having some fitment issues. ≈ Here is OEM one on top and VTT at bottom OEM sits nice and flush inside the cap But VTT one does not. Do I need to trim the 4x tabs on the cap? I’m hesitant to do any permanent modifications and wanted to seek opinions. I did do a search and didn’t get any hits and apologize if this has been discussed before. Thanks
	Appreciate 0 Tweet Quote

05-27-2020, 10:01 AM	#3
ian3924 Second Lieutenant 185 Rep 202 Posts Drives: 2010 E90 335i 6MT Join Date: Aug 2014 Location: NY iTrader: (0)
	Appreciate 0 Quote

05-27-2020, 12:45 PM	#4
Soden82 Major 479 Rep 1,197 Posts Drives: 2011 BMW M3 Join Date: Jun 2017 Location: Boston iTrader: (1) Garage List 2011 BMW M3 [0.00]	Typically you need to file the 4 tabs down on the cover. Depends on the PCV valve and what company makes it __________________ 2009 BMW 335i 6MT big single (eventually) For now... MHD tuned VRSF Race IC DCI ATM exhaust
	Appreciate 1 Chris@VargasTurboTech1933.00 Quote

05-31-2020, 06:50 PM	#5
tip_m Enlisted Member 14 Rep 34 Posts Drives: 335i Join Date: Nov 2019 Location: Bay Area, CA iTrader: (0)	Thanks everyone, just a very minor trimming is all it took. Btw, the original PCV valve was gone at 80k miles
	Appreciate 0 Quote