Sockets 335i build

DR-JEKL · 02-14-2016, 04:19 PM

Looks great mate, and with the black carpet it will be much easier to keep looking clean!

My old Lexus had a beige interior and the beige carpet was a PITA to keep looking like new as with wet shoes the carpet use to get grubby easily! I ended up having it scotchgaurded which worked great just required shampooing every few months or so.

_ink · 02-14-2016, 04:21 PM

What an epic transformation Socks! Huge improvement already.

Pete.J · 02-14-2016, 09:09 PM

Quote:

Originally Posted by Socket

Quote:

Originally Posted by pitos_7

Also F30 can be ordered with the same two tone combo

Looks awesome Pitos
Thanks mate this is exactly what I have in mind

I could do with a hand replacing the dashboard, its probably the most difficult of all the bits.... that and replacing the inlays of the door panels

Hey socket I can help you with the dashboard and door trim installation!

Dash is about a 4 hours job, door trim is about 20 mins per door

timot · 02-15-2016, 01:41 AM

Looking dope Phillip

Socket · 02-15-2016, 03:21 AM

Quote:

Originally Posted by CashedUpBogan

Dude that is already looking SO good!

Quote:

Originally Posted by Fuji

Thanks mate! Also, that interior job looks hectic! Nice job

Quote:

Originally Posted by GeTiNQ

Good job sockie

Looks way better now there is a bit of contrast and not all 'beige'

Quote:

Originally Posted by DR-JEKL

Looks great mate, and with the black carpet it will be much easier to keep looking clean!

My old Lexus had a beige interior and the beige carpet was a PITA to keep looking like new as with wet shoes the carpet use to get grubby easily! I ended up having it scotchgaurded which worked great just required shampooing every few months or so.

Quote:

Originally Posted by _ink

What an epic transformation Socks! Huge improvement already.

Quote:

Originally Posted by timot

Looking dope Phillip

Thanks guys, was a major pita to do but is coming along nicely, DIY is 200 pics long, hope to have it posted soon, might help someone else who is considering doing the same

Socket · 02-15-2016, 03:23 AM

Quote:

Originally Posted by pitos_7

Hey socket I can help you with the dashboard and door trim installation!

Dash is about a 4 hours job, door trim is about 20 mins per door

Got the door trims covered thanks Pitos, at the moment the black door cards have been disassembled ready reconstruction lel

But would really appreciate a hand with the dash mate, happy to contribute to your modding fund for your trouble

Socket · 02-15-2016, 03:33 AM

Regs will recall that I'm having some trouble getting SPCGRY to settle down following the install of the RBs and VTT inlets

Keeps throwing an overboost half engine light, misfires and surging under heavy acceleration, not to mention the light smoking while stationary.

Is clearly not properly tuned, but until i can get it smoothed out, I cant do a decent log and get the tune sorted

So off to Springy motors to put it on the dyno and see what they can turn up

Socket · 02-15-2016, 03:37 AM

Turns out the overboost was caused by the levels being set too low in the JB4 at 7.8 max!!! No wonder it kept going half engine on me.... also the lamba seems to bouncing around putting on the fuel and then immediately cutting it back creating a wave like curve on the dyno, which explains the surging.

Once sorted did a soft 3 gear run to see if the car would run smooth.... ... Bottom trace is with the car overboosting and stuff. Top trace is with the overboost fixed.... Didn't get to do a proper run but I thought I'd post anyway

NeT335 · 02-15-2016, 04:17 AM

Quote:

Originally Posted by Socket

Quote:

Originally Posted by pitos_7

Hey socket I can help you with the dashboard and door trim installation!

Dash is about a 4 hours job, door trim is about 20 mins per door

Got the door trims covered thanks Pitos, at the moment the black door cards have been disassembled ready reconstruction lel

But would really appreciate a hand with the dash mate, happy to contribute to your modding fund for your trouble

By disassembled do you mean you are swapping the beige leather part from your current door cards over to the black door cards so it looks like this?

NeT335 · 02-15-2016, 04:18 AM

Last post didn't post pic for some reason

_ink · 02-15-2016, 04:21 AM

Quote:

Originally Posted by Socket

Turns out the overboost was caused by the levels being set too low in the JB4 at 7.8 max!!! No wonder it kept going half engine on me.... also the lamba seems to bouncing around putting on the fuel and then immediately cutting it back creating a wave like curve on the dyno, which explains the surging.

Once sorted did a soft 3 gear run to see if the car would run smooth.... ... Bottom trace is with the car overboosting and stuff. Top trace is with the overboost fixed.... Didn't get to do a proper run but I thought I'd post anyway

OMG!!! that's what it was?

Since you don't have a USD cable to change stuff.. you/someone must have fiddled with it and changed it accidentally...

Which is why you NEED the mobile app!!!

Socket · 02-15-2016, 05:57 AM

Quote:

Originally Posted by GeTiNQ

Last post didn't post pic for some reason

Exactly....

Socket · 02-15-2016, 05:59 AM

Quote:

Originally Posted by _ink

OMG!!! that's what it was?

Since you don't have a USD cable to change stuff.. you/someone must have fiddled with it and changed it accidentally...

Which is why you NEED the mobile app!!!

Yep... did the whole Alpine Rd drive with the stupid low boost cap setting too.... no wonder Vince could keep up with me lel

NeT335 · 02-15-2016, 06:08 AM

Quote:

Originally Posted by Socket

Quote:

Originally Posted by GeTiNQ

Last post didn't post pic for some reason

Exactly....

Good

Make sure you don't forget to swap the black speaker grille on to the door cards aswell

Socket · 02-15-2016, 08:08 AM

Quote:

Originally Posted by GeTiNQ

Good

Make sure you don't forget to swap the black speaker grille on to the door cards aswell

lol thanks for the reminder

Socket · 02-15-2016, 08:50 AM

Link to carpet and console DIY

http://www.e90post.com/forums/showth...1#post19394121

DR-JEKL · 02-15-2016, 03:26 PM

Ha you wouldn't be the first to accidentally have the JB4 on the wrong map/setting etc

That's what I loved about the cobb, you load the map and its set

So whats the next step, do some logging and send to wedge?

Socket · 02-16-2016, 03:09 AM

Quote:

Originally Posted by DR-JEKL

Ha you wouldn't be the first to accidentally have the JB4 on the wrong map/setting etc

That's what I loved about the cobb, you load the map and its set

So whats the next step, do some logging and send to wedge?

lol im sure its happened before

Actually running MHD with JB4 managing boost. Trebila is doing the tune. Currently running his base map matched to my mods

When I get the car sorted Ill do some 3rd gear wots and continue the tune with him

btw any idea why the lamba would be putting fuel on and then immediately cutting it back??

Boganian Rubes · 02-16-2016, 03:21 AM

Quote:

Originally Posted by Socket

btw any idea why the lamba would be putting fuel on and then immediately cutting it back??

Probably thinks it tastes like shit haha... Idk

Socket · 02-16-2016, 03:57 AM

Quote:

Originally Posted by Rub3n

Probably thinks it tastes like shit haha... Idk

Socket · 02-16-2016, 03:59 AM

MOD 37 - Lux Reversing LEDs

Thanks to Dons GB, now sporting new Lux reversing LED lights
Pictures don't really do these bulbs justice, I'd have to say they are at least 3 times brighter then stock.

Pic 1 - LEDs
Pic 2 - Stock
Pic 3 - Lux LEDs

harms · 02-16-2016, 04:01 AM

Is the surging since you put in jb4?

What's your menu 12 setting on?

02-14-2016, 04:19 PM	#947
DR-JEKL Major General 898 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	Looks great mate, and with the black carpet it will be much easier to keep looking clean! My old Lexus had a beige interior and the beige carpet was a PITA to keep looking like new as with wet shoes the carpet use to get grubby easily! I ended up having it scotchgaurded which worked great just required shampooing every few months or so.
	Appreciate 0 Quote

02-14-2016, 04:21 PM	#948
_ink Jedi samurai ninja turtle 619 Rep 3,021 Posts Drives: X3 M40i 2018 Join Date: May 2012 Location: Sydney, Australia iTrader: (0) Garage List 2018 X3 M40i [0.00]	What an epic transformation Socks! Huge improvement already.
	Appreciate 0 Quote

02-15-2016, 01:41 AM	#950
timot Second Lieutenant 37 Rep 241 Posts Drives: 2016 BMW F31 340i M Sport Join Date: Apr 2015 Location: London, United Kingdom iTrader: (0)	Looking dope Phillip __________________ CARS: 2016 BMW F31 340i M SPORT - FAMILY EXPRESS Sold - 2006 BMW E92 335i - WEEKEND WARRIOR Sold - 2003 BMW E39 530i M SPORT - CLASSIC Q Sold - 2004 AUDI B6 S4 AVANT - THE UNICORN
	Appreciate 0 Quote

02-15-2016, 03:33 AM	#953
Socket Lieutenant General 4542 Rep 11,903 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Regs will recall that I'm having some trouble getting SPCGRY to settle down following the install of the RBs and VTT inlets Keeps throwing an overboost half engine light, misfires and surging under heavy acceleration, not to mention the light smoking while stationary. Is clearly not properly tuned, but until i can get it smoothed out, I cant do a decent log and get the tune sorted So off to Springy motors to put it on the dyno and see what they can turn up Attached Images
	Appreciate 0 Quote

02-15-2016, 03:37 AM	#954
Socket Lieutenant General 4542 Rep 11,903 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Turns out the overboost was caused by the levels being set too low in the JB4 at 7.8 max!!! No wonder it kept going half engine on me.... also the lamba seems to bouncing around putting on the fuel and then immediately cutting it back creating a wave like curve on the dyno, which explains the surging. Once sorted did a soft 3 gear run to see if the car would run smooth.... ... Bottom trace is with the car overboosting and stuff. Top trace is with the overboost fixed.... Didn't get to do a proper run but I thought I'd post anyway Attached Images
	Appreciate 0 Quote

02-15-2016, 04:18 AM	#956
NeT335 Major 157 Rep 1,486 Posts Drives: e92 335i M-Sport Join Date: Feb 2014 Location: Melbourne Australia iTrader: (0)	Last post didn't post pic for some reason Attached Images
	Appreciate 0 Quote

02-15-2016, 08:50 AM	#962
Socket Lieutenant General 4542 Rep 11,903 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	Link to carpet and console DIY http://www.e90post.com/forums/showth...1#post19394121
	Appreciate 0 Quote

02-15-2016, 03:26 PM	#963
DR-JEKL Major General 898 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	Ha you wouldn't be the first to accidentally have the JB4 on the wrong map/setting etc That's what I loved about the cobb, you load the map and its set So whats the next step, do some logging and send to wedge?
	Appreciate 0 Quote

02-16-2016, 03:59 AM	#967
Socket Lieutenant General 4542 Rep 11,903 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	MOD 37 - Lux Reversing LEDs Thanks to Dons GB, now sporting new Lux reversing LED lights Pictures don't really do these bulbs justice, I'd have to say they are at least 3 times brighter then stock. Pic 1 - LEDs Pic 2 - Stock Pic 3 - Lux LEDs Attached Images
	Appreciate 0 Quote

02-16-2016, 04:01 AM	#968
harms Captain 75 Rep 605 Posts Drives: 335i Join Date: Jul 2014 Location: Australia iTrader: (0)	Is the surging since you put in jb4? What's your menu 12 setting on?
	Appreciate 0 Quote