|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
eyehategod's E92 335i xdrive
|
|
04-19-2018, 11:26 AM | #1 |
Second Lieutenant
41
Rep 220
Posts |
eyehategod's E92 335i xdrive
Nothing super special going on here. Just bought it a couple of months ago, no tuning done yet. Sitting on VMR v710's with 12mm spacers in the rears, 235/30/19 front 275/35/19 rear with the fenders rolled. Then I had endlinks and a control arm replaced, along with a KW V1 coilover kit and some new DBA 4000 rotors for the front (still need em for the rear). Standard stuff, but she's mine
Last edited by eyehategod; 04-19-2018 at 11:32 AM.. |
04-19-2018, 05:03 PM | #2 |
BimmerPost Supporting Vendor
24199
Rep 190,807
Posts |
Looks good
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
04-25-2018, 07:04 AM | #3 |
Banned
148
Rep 388
Posts |
Sweet! Just curious what offset you have?
I have Niche M147's coming - 19×8.5 et35 - 19×10 et40 on v1 coilovers 235 fronts - 275 rears. Firehawk indy 500s plus an M3 front end kit. Are you getting any rub at all? Btw... Paint those calipers silver even with a clear finish ro really set off the nice wheels and rotors. Last edited by dublin14; 04-25-2018 at 07:10 AM.. |
Appreciate
0
|
04-25-2018, 08:54 AM | #4 | |
Second Lieutenant
41
Rep 220
Posts |
Quote:
The offset for these wheels is wrong since I bought them used, so I'm running: VMR v710 F: 19x8.5 et 35, 235/35/r19 R: 19x9.5 et 45, 275/30/r19 I bought 12mm spacers for the rears bringing the offset down to 33 in the rear. With a 275 tire in the rear I was getting rub with the back end tucked pretty much all the way in, so I did have my fenders rolled. Front is fine, but I'm running reverse rake for now because I don't want my front end lower than your average curb. |
|
Appreciate
0
|
Bookmarks |
|
|