|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
questions about newly installed new halo bulbs and washer jets
|
|
05-23-2019, 10:23 AM | #1 |
Kash
9
Rep 71
Posts |
questions about newly installed new halo bulbs and washer jets
Hi all.
Installed new halo ring bulbs. Got these for £38.60 using code PAYDAY 25 as one of my halo bulbs had blown and needed replacing anyway: https://www.horizonleds.co.uk/bmw-20...ch=AE-E90-20WC BMW wanted £38 for a original bulb so went with the above. Straight swap, no adjustment needed. looks great. Managed to install without removing the wheel but did remove the arch liner. this was a pig to do so highly advise taking the wheel off. I was just lazy. I didnt get before pics, and the bulbs are actually whiter than in the pics below. I also got these washer jet replacements as both of mine kept sticking. Installed fine, however, i think i need to adjust the nozzles as they now spray over the bonnet. They seem to be ok and look decent quality. time will tell.... https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1 Is it a case of extending them out again and using a pin or something to adjust the alignment? |
05-24-2019, 02:26 AM | #2 |
Kash
9
Rep 71
Posts |
Managed to adjust the nozzles... grabbed the covers and pulled the washers forward and moved the jets using a flat head screw driver.
Need to adjust the windscreen washers slightly. Tried using a pin but it made no difference.... |
Appreciate
0
|
05-24-2019, 06:36 AM | #4 |
Private First Class
117
Rep 143
Posts |
I bought mine from China 2 years ago and they still work great, but I tried to buy from someone with good reviews and more pricy. I think I spend £25 per nozzle.
|
Appreciate
0
|
Bookmarks |
|
|