[ontopofm]

Originally Posted by edo

Shiv, could you please at least make a keyboard shortcut to start/stop datalogging? It is really inconveniet to use touchpad mouse to start/stop datalogging... Especially when there's no passenger.

great idea

[jpsimon]

Agreed!!

[weeeza]

where are the Doomsday Maps

[Aridk]

Originally Posted by Micks-e92

Does the valet mode work with the latest firmware, maps and software?

Thanks!

Same problem here (running stage 1 mt)Didn`t read anywhere that valet mode was enabled???

[TMR]

Originally Posted by ontopofm

great idea

+100!!!

[NM_BMW]

Originally Posted by Aridk

Same problem here (running stage 1 mt)Didn`t read anywhere that valet mode was enabled???

Valet is disabled by default. You can enable it and set the valet speed limit using the user adjustable variables.

[scottp999]

Originally Posted by Humtek

Valet is disabled by default. You can enable it and set the valet speed limit using the user adjustable variables.

+1, If anyone needs documentation on the user adjustables, it is located at:

http://www.vishnutuningforum.com/for...ead.php?t=1002

It looks like if you select valet of "1" then it is on and you will be in stock when the car starts. You have to press the on button on the remote to go to a performance map.

[lawdude]

I'm almost positive my friend has the latest canbus maps. He has NOT described it as a beast. I'm pretty sure he took it to the track while I was on vacation a little over a week ago. I'll check and see what happened.

[Blk07335i]

Originally Posted by scottp999

+1, If anyone needs documentation on the user adjustables, it is located at:

http://www.vishnutuningforum.com/for...ead.php?t=1002

It looks like if you select valet of "1" then it is on and you will be in stock when the car starts. You have to press the on button on the remote to go to a performance map.

Is the latest user software that's pictured in the link available for download?

[scottp999]

Originally Posted by lawdude

I'm almost positive my friend has the latest canbus maps. He has NOT described it as a beast. I'm pretty sure he took it to the track while I was on vacation a little over a week ago. I'll check and see what happened.

+1 I don't think Shiv is using any canbus variable for performance tuning at this point. We have a light that flashes for map designation, code clearing, and that's it.

I am hoping Shiv's statements that he has been working almost exclusivley on the N54 platform (I think it's been 8 weeks or so since he made that statement), means that new maps adjusting performance for additional input variables are coming soon, along with a tested out, easy to install meth kit.

[vase330]

Damn impatient forum we have here dont we? I think y'all are spoilt brats. Shiv, BMS they all have spoilt you guys, and set expectations too high. I'd rather they take their time and produce reliable safe tunes instead of rushing the latest turbo melting beast you all crave. If something goes wrong, it'd be a different and not so pretty story on here with the minions baying for blood and the tuner's head on a tray, not new maps.

[scottp999]

Originally Posted by Blk07335i

Is the latest user software that's pictured in the link available for download?

Nada. Been hoping it is coming for weeks now.

[lawdude]

Originally Posted by scottp999

+1 I don't think Shiv is using any canbus variable for performance tuning at this point. We have a light that flashes for map designation, code clearing, and that's it.

I am hoping Shiv's statements that he has been working almost exclusivley on the N54 platform (I think it's been 8 weeks or so since he made that statement), means that new maps adjusting performance for additional input variables are coming soon, along with a tested out, easy to install meth kit.

I've got a call in to my friend. Will let you know if he tracked it.

[Aridk]

Originally Posted by scottp999

+1, If anyone needs documentation on the user adjustables, it is located at:

http://www.vishnutuningforum.com/for...ead.php?t=1002

It looks like if you select valet of "1" then it is on and you will be in stock when the car starts. You have to press the on button on the remote to go to a performance map.

Thanks Scott
Think I got it wrong cause i couldn`t get it to flash check eng-light when I pressed the off button, but it says clealy that I have to press the on button before I can activate the the different maps

[lawdude]

Alrighty; at the track the latest canbus is no beast. After running it down the track 3 times to allow for adaptation, he can tell no difference between it and the previous canbus version. The canbus race gas map is much faster and the 1-19 race gas map is faster still. This is according to my friend.

If yours is a beast and gets you down the track quicker and faster than previous versions, post your numbers.

[sflgator]

Originally Posted by lawdude

Alrighty; at the track the latest canbus is no beast. After running it down the track 3 times to allow for adaptation, he can tell no difference between it and the previous canbus version. The canbus race gas map is much faster and the 1-19 race gas map is faster still. This is according to my friend.

If yours is a beast and gets you down the track quicker and faster than previous versions, post your numbers.

Ok, but it's summertime, and very hot and humid, especially down south...94 degrees F / 70% R.H. here. Running at different times of the year with very different conditions makes it difficult to tell which map makes the car faster. :

[edo]

I did some datalogs and compared 5-29 stage 2 maps with different TQ settings to previous maps (5-08; also stage 2). 60-130 mph - same time with both maps. Temperature almost the same. New spark plugs with 5-29.

[gimmes name]

I have the V3 PNP Rev1. No intentions of upgrading anytime soon (unless someone can justify why I should?). I don't use the datalogging tools, I merely "plug it in and drive".

I've been running the maps from several months ago. Can anyone comment on the new non-doomsday 6AT map differences? I am running a Stage I.

I'm curious to see what people's reaction / feedback is before I upload the latest version.

[brianhn1]

Originally Posted by lawdude

Alrighty; at the track the latest canbus is no beast. After running it down the track 3 times to allow for adaptation, he can tell no difference between it and the previous canbus version. The canbus race gas map is much faster and the 1-19 race gas map is faster still. This is according to my friend.

If yours is a beast and gets you down the track quicker and faster than previous versions, post your numbers.

What were you buddy's times?

[NM_BMW]

Originally Posted by gimmes name

I have the V3 PNP Rev1. No intentions of upgrading anytime soon (unless someone can justify why I should?). I don't use the datalogging tools, I merely "plug it in and drive".

I've been running the maps from several months ago. Can anyone comment on the new non-doomsday 6AT map differences? I am running a Stage I.

I'm curious to see what people's reaction / feedback is before I upload the latest version.

I have Rev I also and I would recommend you update to the latest maps. You'll be shocked on how quickly boost is achieved. What maps are you currently on? I was on 2-19 for the longest time, until shiv released the latest maps.

[lawdude]

Originally Posted by brianhn1

What were you buddy's times?

I'll see if I can get 'em. He's still working.

[335Turbo]

Originally Posted by weeeza

where are the Doomsday Maps

Who knows... I asked a few days ago and didn't even get a response. My guess is SHIV is just really busy working on something else.