|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
~~~~~~SETRAB Oil Cooler Mod~~~~~~
|
|
08-06-2012, 06:37 PM | #1 |
Not Baned
86
Rep 1,352
Posts |
~~~~~~SETRAB Oil Cooler Mod~~~~~~
Hey guys Check it out!
Big Thanks to taylors335 for the Write Up. This is has been in the making for a couple of weeks now, I've just been waiting on all the parts and all. Finally got everything-in, put all the hoses together, fittings welded and BAM! Let me know what you guys think! P.S. I ended up going with a Setrab Oil Cooler just cuz i got a great deal on one... Before: After:
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... |
08-06-2012, 07:35 PM | #6 |
First Lieutenant
19
Rep 381
Posts |
doesnt matter since cars that dont have oem oil coolers just have plugs right there that you can screw out.
__________________
2008 335i 6MT
|
Appreciate
0
|
08-06-2012, 08:54 PM | #8 | |
Not Baned
86
Rep 1,352
Posts |
Quote:
I forgot to take a pic :-/ sorry
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... |
|
Appreciate
0
|
08-06-2012, 08:54 PM | #9 |
Colonel
158
Rep 2,561
Posts |
Nice! How much did it run? How was the install?
__________________
Montego Blue 2007 E92 335i - ZSP / ZPP / Steptronic / Logic7 Broadway Static - CCW - Megan - Orion Instagram: bmwforlife |
Appreciate
0
|
08-06-2012, 08:58 PM | #10 | |
Not Baned
86
Rep 1,352
Posts |
Quote:
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... |
|
Appreciate
0
|
08-06-2012, 09:00 PM | #11 | |
Not Baned
86
Rep 1,352
Posts |
Quote:
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... |
|
Appreciate
0
|
08-06-2012, 09:03 PM | #12 | |
Not Baned
86
Rep 1,352
Posts |
Quote:
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... |
|
Appreciate
0
|
08-06-2012, 09:17 PM | #14 | |
Not Baned
86
Rep 1,352
Posts |
Quote:
I have a Performance Steering wheel so I'm always monitoring my temps...
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... Last edited by JMARS; 08-06-2012 at 10:17 PM.. |
|
Appreciate
0
|
08-07-2012, 04:31 AM | #15 |
Colonel
263
Rep 2,559
Posts |
Looks good. But very similar to the AR Design radiator, I think they're also using Setrab cores.
Alpina_B3_Lux
__________________
Audi R8 LMX, BMW M550i xDrive (G30 LCI); gone: Alpina B3 3,3 (E46), BMW 335i, Audi R8 V10 manual, Audi R8 V10, BMW M235i, BMW 550i F10
|
Appreciate
0
|
08-07-2012, 01:36 PM | #18 |
Not Baned
86
Rep 1,352
Posts |
Just for fun... lol I love these DIY mods.
Although I'm sure i will benefit from it
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... |
Appreciate
0
|
08-07-2012, 02:49 PM | #20 | |
Not Baned
86
Rep 1,352
Posts |
Quote:
Here is the highest temp I got after a few spirited runs (45 min or so of driving) then some stop and go. Keep in mind IT'S HOT OUT!!! 96°!!!!!!!!
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... Last edited by JMARS; 08-07-2012 at 03:11 PM.. |
|
Appreciate
0
|
08-07-2012, 05:24 PM | #22 |
Not Baned
86
Rep 1,352
Posts |
(1) - Setrab Oil Cooler. I went with 50-619-7612 which is a 19 Row Series-6 Cooler, If I was to do it over I would get the 50-920-7612 which is the 20 Row Series-9 (3in longer)
(2) - 22mm-AN8 fittings threads onto the oil cooler (1) - Straight -AN8 Fitting (Drivers Side Hose End) (1) - 45* -AN8 Fitting (Passenger Side Hose End) (2) - 90* -AN8 Fittings (Oil Housing Fittings) (2) - Drilled Oil Housing Plugs (2) - 90* Pipe Thread to -AN8 (Chop off the Threads and Weld to Drilled Plugs **Make sure to dial them(mark them) in so they point in the right direction**) (4) - 4ft of hose Thanks prett much it. I used taylors335 write-up a reference... http://www.e90post.com/forums/showth...ght=oil+cooler
__________________
FFTEC 900 - 6466 | PR PI Stg4 | Motiv Tune/BB/FF | Spec Stg 2+ | Quaife LSD | DSS Half-shafts
VRSF Race IC | VRSF Charge Pipe | Evo Dual Oil Cooler | BC Coilover | To be continued... |
Appreciate
0
|
Bookmarks |
|
|