[Brule]

Officially got a 6466 setup on.

Put turbo on just need to make an intercooler pipe from the turbo.
looks pretty cool I think. Exhaust is loud when you rev it. Cant wait ro hear it under boost like 30psi boost.

Photo of turbo looking nice.

[Brule]

I dont know why photos do not upload until you do it 3 times its so annoying.

Attempt no.2

[Brule]

Video giving it a rev.
Pretty noisy.

[Hoper]

Originally Posted by Brule

Video giving it a rev.
Pretty noisy.

Nice one Brule, when's the next meet?

[Brule]

9th April Roll racing.
24th April Drag racing.

[Brule]

Done a few minor things.

Put a flexi joint on the wastegate pipe.

Put new heat sheathing over the oil feed line. It has 2 heat sheathing covers like the oil drain.

Put some more aluminium heat protectors against the coils between dump pipe.

Turbo beanie, wastegate beanie

Made vacuum lines but waiting on one wastegate fitting.

Drove it out of carport, washed it drove it back in. 4 inch straight pipe is rediculous loud when you rev it. Ok a bit loud on idle but theres no way I will drive it on the street that loud.

I'll make a slip on silencer for it to get to and from the track.

[Brule]

Photos

Ready to roll just need a barb for wastegate.

[Brule]

Photo attempt 3

[Brule]

Bottom wastegate vacuum isnt plugged in. Its just sitting against it to look finished.

[Coupes33]

Hey Brule, are you going to put your car on a dyno when you get it running again? The information that you would gain from that may be very helpful.

[Brule]

Yea maybe.

Theres a hub dyno up here now.

[Coupes33]

Originally Posted by Brule

Yea maybe.

Theres a hub dyno up here now.

The hub dyno would be the way to go as it removes errors associated with roller dynos.

[Brule]

Postman gave me some grub screws for the wastegate so I put them in and went for a drive around the block.

Warmed it up then came home and gave ut a test on the transbrake and a few free revs like tbe ricer kids these days.

Exhaust is next level. It will be pretty wild on boost.


Video of it.
Reving it up is the last 1 minute

[Brule]

Few 7k rpm revs.
Can you hear the issue?

[Socket]

whats going on Brule?

[Coupes33]

What was the issue Brule?

[Brule]

Not sure. Just worried about the sound from the turbo but it might just be noisier without a filter.
Still makes boost but when it idles you can hear the bearing I think.

[Brule]

This should be my last week working on my house so next week I can play with it again.

[rev210]

What AR housing did you go for for the turbine side?
Guessing .84 ?

[Brule]

1.0 lookung for more top end but still quick enough spool at roll racing.

Did .84 on 6266 it spooled super quick. Could light up the tyres just putting the foot down from a standstill.

[Brule]

Took my car to get registered and went for a few drives on 17psi. Everything seems normal, spool is a touch slower then the 6266 with .84AR but I reduce the spool at roll racing anyway.

Im a bit annoyed the drag strip didnt open last year so Im setting it up for roll racing with 4.10 gears.

Started removing diff yesterday.

[Brule]

Max speed will be around 130mph but it will get there quicker then with a 3.08