|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
HELP !!!
|
|
03-02-2010, 03:06 PM | #1 |
New Member
0
Rep 5
Posts |
HELP !!!
Sorry for my English because I'm French...
I have a problem with the passenger seatbelt extender. It doesn't work anymore. I have worked on my car this Sunday : I have installed new speaker in the front doors, new sub under the seat and an amp in the trunk. So I removed the seat and the door panel. All works fine but I think i made a mistake because now the passenger seatbelt extender is off. Could you please help me ? All the connectors under the seat looks OK. Any idea ? Thanks for your help. |
03-02-2010, 03:43 PM | #4 |
First Lieutenant
8
Rep 315
Posts |
Wire might be shorting somewhere.
__________________
'10 335i sedan/AW/Premium/M-Sport/Steptronic/Active Steering/6FL/Logic7/Sirius/heated seats/rear fold seat/alarm/Navi/Performance Power Kit
|
Appreciate
0
|
03-02-2010, 04:19 PM | #5 |
New Member
0
Rep 5
Posts |
i don't know. I have just worked on the speaker wire and nothing else. Is there a connector in the door panel I should have forget ?
The seatbelt light still works : it's "on" when there is a passenger without belt. Anyone knows what connector I have to check under the seat ? |
Appreciate
0
|
03-02-2010, 04:37 PM | #6 |
Registered
0
Rep 1
Posts |
There are sensors in each front seat that detect if the seat is occupied, thus triggering the seat belt extender. Sounds like you might have missed reconnecting the sensor.
__________________
__________________
2007 328i E92 Coupe Step/Sport/Premium/Winter/PDC/Logic7 Deep Green/Beige Tan Dakota |
Appreciate
0
|
03-03-2010, 05:15 AM | #7 |
New Member
0
Rep 5
Posts |
I don't understand.
I chek all the connectors under the seat and it's Ok. There are all pluged in place. I have checked my wire in the door. There are no short circuit it's well insulated. All the OEM connectors are in place (light, window, etc..). I have removed the rear panel to check the extender : the connectors and the wire are OK. The fuse is good... I don't know what to do... |
Appreciate
0
|
Bookmarks |
|
|