DIY: E9X ACC Retrofit

Bbqthat · 06-13-2020, 10:01 PM

Hi, I'm looking for a bit of assistance with the coding of my ACC Retrofit. In my WinKFP there isn't a spot where I can change the Vin. I'm using SP-Daten v67 if that matters. I've tried to change the Vin with Protool but it fails to change it.

I'm not sure if it's my vin being wrong or the sensor being out of alignment but when I try to turn on the cruise control I get an active cruise control fault that shows on the Idrive. I might try one of my other sensors before going through the alignment procedure. Ista does say the sensor needs aligned but I'm not sure how it would know that without checking the alignment first?

Everything shows up in the tree in ista just fine but I'm seeing a fault saying I need to Re-encode the ACC control unit with Progman Version 30.0 or higher as well as quite a few other faults that came up once I programmed the LDM and ACC with WinKFP.

Bbqthat · 06-15-2020, 12:34 PM

Got it figured out, I re-coded everything in the factory coding profile in ncsexpert and also had to swap out my LDM as the one i had didn't want to work. Such a good feeling getting this working. The minimum follow distance is like twice as far as it is in my fusion though.

dumitru.o · 06-24-2020, 02:13 AM

what gearbox do you have or how did you managed to get the kombi dhow "D6" instead of just "D" ?

nsjames · 06-24-2020, 09:43 AM

Quote:

Originally Posted by dumitru.o

what gearbox do you have or how did you managed to get the kombi dhow "D6" instead of just "D" ?

the ZF box will do that with XHP.

Bbqthat · 07-02-2020, 05:38 AM

Quote:

Originally Posted by dumitru.o

what gearbox do you have or how did you managed to get the kombi dhow "D6" instead of just "D" ?

I have a Sutphin trans tune which I flashed on with XHP. It's nice seeing what gear I'm in for sure.

shannon1 · 07-02-2020, 04:33 PM

Quote:

Originally Posted by dumitru.o

what gearbox do you have or how did you managed to get the kombi dhow "D6" instead of just "D" ?

Quote:

Originally Posted by nsjames

the ZF box will do that with XHP.

Quote:

Originally Posted by Bbqthat

I have a Sutphin trans tune which I flashed on with XHP. It's nice seeing what gear I'm in for sure.

I wish my GM gearbox would let me do that

I think its an awesome added extra.

Nickco43 · 07-02-2020, 10:39 PM

I miss ACC on my F10. The parts for it are over $1000.

dumitru.o · 07-12-2020, 12:31 PM

my ACC retrofit is now official after it was uploaded into the BMW database

unrulyteach · 07-13-2020, 12:12 PM

Quote:

Originally Posted by dumitru.o

my ACC retrofit is now official after it was uploaded into the BMW database

How did u do that

dumitru.o · 07-14-2020, 03:31 AM

the bmw dealer did it when i went there with the car

ChristianMoller · 07-19-2020, 01:02 PM

Yet another one with manual transmission got it to work

Does need some time to get used to

/Christian

unrulyteach · 07-19-2020, 03:23 PM

Quote:

Originally Posted by ChristianMoller

Yet another one with manual transmission got it to work

Does need some time to get used to

/Christian

Need pics

ChristianMoller · 07-20-2020, 05:40 AM

Quote:

Originally Posted by unrulyteach

Need pics

ofcourse, what do you need pics of?

As i have a MT i get a warning in the CIC when its time to shift down or up and shifting gears when ACC is engaged is no problem.

/Christian

unrulyteach · 07-20-2020, 06:05 AM

Quote:

Originally Posted by ChristianMoller

Quote:

Originally Posted by unrulyteach

Need pics

ofcourse, what do you need pics of?

As i have a MT i get a warning in the CIC when its time to shift down or up and shifting gears when ACC is engaged is no problem.

/Christian

The dash

ChristianMoller · 07-20-2020, 10:07 AM

here you go,

unrulyteach · 07-20-2020, 12:16 PM

Quote:

Originally Posted by ChristianMoller

here you go,

Nice

ChristianMoller · 07-20-2020, 01:32 PM

Thank´s

Aus335iguy · 07-28-2020, 05:48 AM

Hey folks, Good to see you all got this working!
I was lucky enough to get a 335i fitted stock and I honestly don't know how I'd live without it as I do a fair few highway trips. It's a godsend.
I have a problem though. I also want an M3 DSC. My understanding is that it can and has been done and involves a hybrid M3 and non M3 DSC. Anyone know how to do that ?

Nickco43 · 07-28-2020, 01:59 PM

Quote:

Originally Posted by Aus335iguy

Hey folks, Good to see you all got this working!
I was lucky enough to get a 335i fitted stock and I honestly don't know how I'd live without it as I do a fair few highway trips. It's a godsend.
I have a problem though. I also want an M3 DSC. My understanding is that it can and has been done and involves a hybrid M3 and non M3 DSC. Anyone know how to do that ?

I agree. I just dropped $600 on F10 ACC S+G bits and I am super excited to get it installed.

unrulyteach · 07-28-2020, 03:55 PM

Question, will the ACC light up on m3 cluster?

Aus335iguy · 07-28-2020, 04:19 PM

Quote:

Originally Posted by unrulyteach

Question, will the ACC light up on m3 cluster?

There's posts in this thread about how to get it to work and involves soldering LEDS on the circuit board

sam9116 · 08-12-2020, 08:35 PM

Quote:

Originally Posted by dumitru.o

which video?

my advice is not to tap any wires in the engine compartment because those wires are well insulated and breaking that will not be good for the future (risk of corrosion)

thank you for providing an alternative path to wire tapping. I feel it's risky as well.

06-13-2020, 10:01 PM	#111
Bbqthat New Member 7 Rep 9 Posts Drives: Bmw 335d, Ford Fusion hybrid, Join Date: May 2019 Location: San Diego, California iTrader: (0)	Hi, I'm looking for a bit of assistance with the coding of my ACC Retrofit. In my WinKFP there isn't a spot where I can change the Vin. I'm using SP-Daten v67 if that matters. I've tried to change the Vin with Protool but it fails to change it. I'm not sure if it's my vin being wrong or the sensor being out of alignment but when I try to turn on the cruise control I get an active cruise control fault that shows on the Idrive. I might try one of my other sensors before going through the alignment procedure. Ista does say the sensor needs aligned but I'm not sure how it would know that without checking the alignment first? Everything shows up in the tree in ista just fine but I'm seeing a fault saying I need to Re-encode the ACC control unit with Progman Version 30.0 or higher as well as quite a few other faults that came up once I programmed the LDM and ACC with WinKFP.
	Appreciate 0 Quote

06-15-2020, 12:34 PM	#112
Bbqthat New Member 7 Rep 9 Posts Drives: Bmw 335d, Ford Fusion hybrid, Join Date: May 2019 Location: San Diego, California iTrader: (0)	Got it figured out, I re-coded everything in the factory coding profile in ncsexpert and also had to swap out my LDM as the one i had didn't want to work. Such a good feeling getting this working. The minimum follow distance is like twice as far as it is in my fusion though. Attached Images
	Appreciate 1 unrulyteach401.00 Quote

06-24-2020, 02:13 AM	#113
dumitru.o coding BMW..... 561 Rep 1,027 Posts Drives: BMW Join Date: Jun 2013 Location: the land of Dracula iTrader: (0)	what gearbox do you have or how did you managed to get the kombi dhow "D6" instead of just "D" ?
	Appreciate 0 Quote

07-02-2020, 10:39 PM	#117
Nickco43 Lieutenant Colonel 1634 Rep 1,968 Posts Drives: 2016 BMW X1 Join Date: Apr 2018 Location: Denver, CO iTrader: (1) Garage List 2016 BMW X1 [0.00]	I miss ACC on my F10. The parts for it are over $1000.
	Appreciate 0 Quote

07-12-2020, 12:31 PM	#118
dumitru.o coding BMW..... 561 Rep 1,027 Posts Drives: BMW Join Date: Jun 2013 Location: the land of Dracula iTrader: (0)	my ACC retrofit is now official after it was uploaded into the BMW database
	Appreciate 2 shannon1701.00 ChristianMoller19.50 Quote

07-14-2020, 03:31 AM	#120
dumitru.o coding BMW..... 561 Rep 1,027 Posts Drives: BMW Join Date: Jun 2013 Location: the land of Dracula iTrader: (0)	the bmw dealer did it when i went there with the car
	Appreciate 0 Quote

07-19-2020, 01:02 PM	#121
ChristianMoller Private 20 Rep 68 Posts Drives: e91 325 touring Join Date: Nov 2019 Location: Sweden iTrader: (0)	Yet another one with manual transmission got it to work Does need some time to get used to /Christian
	Appreciate 0 Quote

07-20-2020, 10:07 AM	#125
ChristianMoller Private 20 Rep 68 Posts Drives: e91 325 touring Join Date: Nov 2019 Location: Sweden iTrader: (0)	here you go,
	Appreciate 1 unrulyteach401.00 Quote

07-20-2020, 01:32 PM	#127
ChristianMoller Private 20 Rep 68 Posts Drives: e91 325 touring Join Date: Nov 2019 Location: Sweden iTrader: (0)	Thank´s
	Appreciate 0 Quote

07-28-2020, 05:48 AM	#128
Aus335iguy Colonel 662 Rep 2,140 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Hey folks, Good to see you all got this working! I was lucky enough to get a 335i fitted stock and I honestly don't know how I'd live without it as I do a fair few highway trips. It's a godsend. I have a problem though. I also want an M3 DSC. My understanding is that it can and has been done and involves a hybrid M3 and non M3 DSC. Anyone know how to do that ? __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

07-28-2020, 03:55 PM	#130
unrulyteach Colonel 401 Rep 2,370 Posts Drives: 2011 335i Join Date: May 2016 Location: myrtle beach sc iTrader: (0) Garage List 2011 BMW 335i [0.00]	Question, will the ACC light up on m3 cluster?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search