[stenis14]

Hello
Received brake warning and car on lift, indicated worn brake pads
First tried to restore both points, went well
but nothing happened to the lamps. I changed the brake pads and wear
warn cabel and would then reset the service lamp, but it didn't work at all,
After all, the lights are on, Back I know it's ok.
Don't get wise to this one who can come up with some tips?

Sorry for bad English

[Sensible_]

Originally Posted by stenis14

Hello
Received brake warning and car on lift, indicated worn brake pads
First tried to restore both points, went well
but nothing happened to the lamps. I changed the brake pads and wear
warn cabel and would then reset the service lamp, but it didn't work at all,
After all, the lights are on, Back I know it's ok.
Don't get wise to this one who can come up with some tips?

Sorry for bad English

What sensor did you use?

They often fail. Buy BMW original sensors.

Failing that. Cut the end of the sensor, strip the insulating wire and join the ends. Then reset the computer.

[dragerboy]

I'm having the same issue but it is intermittent. Can it mean both front or rear sensor?

[dragerboy]

I fitted a new sensor on the front and no errors for a week