N55 valvetronic problem

bmwcar · 02-12-2016, 02:15 PM

I have this problem with 2010 e70 3.5i . Car doesnt start. I get these errors.
Could it be failed valvetronic motor or failed ecu, I checked all fuses and relayes are ok.

Motor Control:
Engine / Motor
Valvetronic system: no movement detected
Code: 2DCF
DME, internal error, control Valvetronic: Malfunction
Code: 36D4
Valvetronic servomotor controlled Phase V: Line break
Code: 2DE3
Valvetronic servomotor: Overload
Code: 2DE5
Valvetronic servomotor: Components Protection, Shutdown System
Code: 2DE9

capitalx · 10-13-2017, 09:18 AM

2011 X5 35i 55K miles

same issue- car died while driving, no warning and wouldn't start.

Codes:
2DE5
2DE9
36D4
371A

At an Indy shop replacing the motor now. But it was supposed to be ready yesterday. Fingers crossed but the way this car has been, i'm certain it will be more expensive and difficult to locate.

It seems every time i research a code that pops on the x5 it is almost always associated with another 2011 35i car. What's up with that year and so many problems?

N55Jamaican · 10-13-2017, 10:01 AM

Quote:

Originally Posted by capitalx

2011 X5 35i 55K miles

same issue- car died while driving, no warning and wouldn't start.

Codes:
2DE5
2DE9
36D4
371A

At an Indy shop replacing the motor now. But it was supposed to be ready yesterday. Fingers crossed but the way this car has been, i'm certain it will be more expensive and difficult to locate.

It seems every time i research a code that pops on the x5 it is almost always associated with another 2011 35i car. What's up with that year and so many problems?

malandrino74 · 08-02-2019, 09:48 AM

I have these codes:

2DE3 -valvetronic servomotor,activation, volt phase: line disconnection
371A – valvetronic, supply voltage: line disconnection
36D4 – DME Internal fault, activation Valvetronic: malfunction
2DE5 – Valvetronic overload protection: servomotor overloaded
2DE9 – Valvetronic component protection, servomotor : deactivation system.

Although, I'm still able to drive. Yes, 2011 335 is a POS. I've replaced two waterpumps, exactly at 75Km each, power steering pump, oil gaskets, both rear calipers seized, coolant tank cracked, air intake pipe cracked, windshield washer leaking and looks like valvetronic/eccentric shaft next!

I will never purchase another BMW!

02-12-2016, 02:15 PM	#1
bmwcar Private 7 Rep 57 Posts Drives: BMW 125i E88, 118D F20 Join Date: Aug 2009 Location: C iTrader: (0)	N55 valvetronic problem I have this problem with 2010 e70 3.5i . Car doesnt start. I get these errors. Could it be failed valvetronic motor or failed ecu, I checked all fuses and relayes are ok. Motor Control: Engine / Motor Valvetronic system: no movement detected Code: 2DCF DME, internal error, control Valvetronic: Malfunction Code: 36D4 Valvetronic servomotor controlled Phase V: Line break Code: 2DE3 Valvetronic servomotor: Overload Code: 2DE5 Valvetronic servomotor: Components Protection, Shutdown System Code: 2DE9
	Appreciate 0 Tweet Quote

10-13-2017, 09:18 AM	#2
capitalx New Member 0 Rep 18 Posts Drives: 2011 X5 E70 Join Date: Apr 2017 Location: Atlanta iTrader: (0)	2011 X5 35i 55K miles same issue- car died while driving, no warning and wouldn't start. Codes: 2DE5 2DE9 36D4 371A At an Indy shop replacing the motor now. But it was supposed to be ready yesterday. Fingers crossed but the way this car has been, i'm certain it will be more expensive and difficult to locate. It seems every time i research a code that pops on the x5 it is almost always associated with another 2011 35i car. What's up with that year and so many problems?
	Appreciate 0 Quote

08-02-2019, 09:48 AM	#4
malandrino74 New Member 0 Rep 13 Posts Drives: 2011 335i xDrive Sedan Join Date: Mar 2011 Location: King City, Ontario iTrader: (0)	I have these codes: 2DE3 -valvetronic servomotor,activation, volt phase: line disconnection 371A – valvetronic, supply voltage: line disconnection 36D4 – DME Internal fault, activation Valvetronic: malfunction 2DE5 – Valvetronic overload protection: servomotor overloaded 2DE9 – Valvetronic component protection, servomotor : deactivation system. Although, I'm still able to drive. Yes, 2011 335 is a POS. I've replaced two waterpumps, exactly at 75Km each, power steering pump, oil gaskets, both rear calipers seized, coolant tank cracked, air intake pipe cracked, windshield washer leaking and looks like valvetronic/eccentric shaft next! I will never purchase another BMW!
	Appreciate 0 Quote