E92 323i STEREO/CCC Module replacement options

AnthBech · 06-13-2020, 04:57 AM

Hi all,

I drive a 2007 BMW e92 323i Coupe and a few weeks ago my stereo and all related functions have stopped working. Speakers still work for dash warnings (seatbelt etc). The Bluetooth module still connects to my phone. However, the display either doesn’t turn on or will turn on and get stuck on the boot loader screen.

I removed my CCC module (BMW p/n: 9149232) and after examining for dry solder joints or excess heat during operation I couldn’t notice anything significant. This leads me to believe either the Capacitors are faulty (Will be replaced in the coming week) or the actual software/ICs are faulty.

I have 2 questions in the meantime:
1 - In the case that it is not capacitors and the module is virtually dead, would I be able to install an aftermarket Android display system? I know most of these upgrades still allow you to access the factory iDrive system but my question is essentially, does it work ‘independent’ to the iDrive module? Or does it infact ‘piggyback’ off the ccc/iDrive module? Has anyone else had this issue and successfully installed an android unit?

2 - if I purchase an OEM replacement module, will I need to recode it for my car? Or can I just get one with the exact same Part Number and plug’n’play?

Thanks in advance to anyone who can help!

nsjames · 06-13-2020, 10:01 AM

in order to gain access to the factory interface your CCC unit needs to be working.

the aftermarket display simply changes input to the original.

yes. a used replacement would need to be coded to your chassis.

another option to consider may be a CIC upgrade if you're going to the trouble.

that's my CCC plan. The system isn't really worth much money to try and save it when you could spend a few dollars more and upgrade it to something that's a lot more useful.

ctuna · 06-13-2020, 05:29 PM

Head Unit's need to be programmed to the options on your car.
If you got it from one that had the same options it might work
outright most of the time this is not the case.
Doesn't matter if it is Pro Radio or I drive.
Most all modules need programming when replaced .

AnthBech · 06-14-2020, 11:19 PM

In terms of pricing, my best option at this stage would be to get the replacement module 2nd hand and try my luck. If that doesn't work ill have to get it recoded to my car by an actual BMW Tech.

I am wondering if anyone has been successful at installing the android system with a non-operational factory module. From what i'm gathering it wouldn't work.

ctuna · 06-15-2020, 12:30 AM

06-13-2020, 04:57 AM	#1
AnthBech New Member 0 Rep 6 Posts Drives: 2007 BMW 323i Coupe E92 Join Date: Mar 2020 Location: Sydney, NSW Australia iTrader: (0)	E92 323i STEREO/CCC Module replacement options Hi all, I drive a 2007 BMW e92 323i Coupe and a few weeks ago my stereo and all related functions have stopped working. Speakers still work for dash warnings (seatbelt etc). The Bluetooth module still connects to my phone. However, the display either doesn’t turn on or will turn on and get stuck on the boot loader screen. I removed my CCC module (BMW p/n: 9149232) and after examining for dry solder joints or excess heat during operation I couldn’t notice anything significant. This leads me to believe either the Capacitors are faulty (Will be replaced in the coming week) or the actual software/ICs are faulty. I have 2 questions in the meantime: 1 - In the case that it is not capacitors and the module is virtually dead, would I be able to install an aftermarket Android display system? I know most of these upgrades still allow you to access the factory iDrive system but my question is essentially, does it work ‘independent’ to the iDrive module? Or does it infact ‘piggyback’ off the ccc/iDrive module? Has anyone else had this issue and successfully installed an android unit? 2 - if I purchase an OEM replacement module, will I need to recode it for my car? Or can I just get one with the exact same Part Number and plug’n’play? Thanks in advance to anyone who can help!
	Appreciate 0 Tweet Quote

06-13-2020, 10:01 AM	#2
nsjames Brigadier General 2440 Rep 4,330 Posts Drives: 08 328xi Touring Join Date: May 2017 Location: ohio iTrader: (0)	in order to gain access to the factory interface your CCC unit needs to be working. the aftermarket display simply changes input to the original. yes. a used replacement would need to be coded to your chassis. another option to consider may be a CIC upgrade if you're going to the trouble. that's my CCC plan. The system isn't really worth much money to try and save it when you could spend a few dollars more and upgrade it to something that's a lot more useful.
	Appreciate 0 Quote

06-13-2020, 05:29 PM	#3
ctuna Lieutenant General 1911 Rep 13,103 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	Head Unit's need to be programmed to the options on your car. If you got it from one that had the same options it might work outright most of the time this is not the case. Doesn't matter if it is Pro Radio or I drive. Most all modules need programming when replaced .
	Appreciate 0 Quote

06-14-2020, 11:19 PM	#4
AnthBech New Member 0 Rep 6 Posts Drives: 2007 BMW 323i Coupe E92 Join Date: Mar 2020 Location: Sydney, NSW Australia iTrader: (0)	In terms of pricing, my best option at this stage would be to get the replacement module 2nd hand and try my luck. If that doesn't work ill have to get it recoded to my car by an actual BMW Tech. I am wondering if anyone has been successful at installing the android system with a non-operational factory module. From what i'm gathering it wouldn't work.
	Appreciate 0 Quote

06-15-2020, 12:30 AM	#5
ctuna Lieutenant General 1911 Rep 13,103 Posts Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca iTrader: (0)	You can program it yourself if you have some Technical ability the one problem is after 3/07 you may need the more expensive Icom cable rather than the cheap k/d can cable. It's a good idea to have the diagnostic and coding software available when you do need to use it. The software itself is basically free but a K/D can cable is about 50 bucks US for a good one however the Icom cable is 300 to 500 bucks US. Diagnostic Manuals Inpa/Ista D https://bimmerprofs.com/diagnostics-inpa-part-1/ https://www.google.com/url?sa=t&rct=...7x8H3pN8h1fMuF https://carmod.ru/files/icom/istad_en.pdf https://www.e90post.com/forums/showthread.php?t=1681573 https://www.bimmerforums.com/forum/s...-P-actually-do primary links https://www.bimmerfest.com/forums/at...9&d=1539905743 https://www.e90post.com/forums/showthread.php?t=1681573 https://www.bimmerfest.com/forums/at...1&d=1590283589 There is a coding, stereo and idrive subforum here bmw boards and links https://www.e90post.com/forums/forumdisplay.php?f=27 https://www.bimmerfest.com/forums/forumdisplay.php?f=99 https://www.e90post.com/forums/forumdisplay.php?f=2 https://www.e90post.com/forums/forumdisplay.php?f=122 https://www.e90post.com/forums/forumdisplay.php?f=368 https://www.e90post.com/forums/forumdisplay.php?f=16 https://bimmerretrofit.com/store/ https://www.e90post.com/forums/forumdisplay.php?f=378
	Appreciate 0 Quote