[Wolf 335]

If anyone is using this product could you provide your feedback?

autogeek.net reviews are pretty positive.

[dmatre]

I use both HyperCompound & HyperPolish.

I love them. They can be worked almost forever, and they don't dust. Be sure you have ONR diluted as a detailer for polish removal (see directions on the HyperPolish bottle).

The HyperPolish is a polish, so if you have some correction to do, you'll need something with a bit more cut to it.

One note: when finished polishing, remove the spray head from the bottle, spray the residual product from the spray head back into the bottle (don't waste), then flush the sprayer with hot water, and recap the bottle. Store the sprayer separately. Failure to clear the sprayer before storage will result in the sprayer being unusable if the residual product dries in the hose/head.

[spazzz]

Great light to medium cut polish. Menzerna 3500 is about the same, maybe a little more cut.
For me those 2 are less finicky than Meguiars 205.

Hyper Polish is a great all around polish to own. I haven't used it on my BMW since I stick to Menzerna.

[dmatre]

Originally Posted by spazzz

Great light to medium cut polish. Menzerna 3500 is about the same, maybe a little more cut.
For me those 2 are less finicky than Meguiars 205.

Hyper Polish is a great all around polish to own. I haven't used it on my BMW since I stick to Menzerna.

I use Menzerna on wifey's Benz (Ceramiclear paint - VERY hard), but personally prefer the Optimum products for all other applications.

The main difference for me is that the OPT doesn't stain textured black plastic trim as much as the Menzerna, and it doesn't seem to leave as much in the gaps/seams.

When using Menzerna, I tape all seams. When using OPT I just pass right over them.

Removing the Menzerna is a bit easier, as it dries to a powder and can be wiped away easily, where the OPT never dries completely, and so needs a lubricant/cleaner to get it off the paint completely and without marring.

Both are great products, but I find OPT to be easier & more forgiving. As I get up there in years, the less work I have to do (to get the same results) the more I appreciate it.

[Wolf 335]

Originally Posted by spazzz

spazzz

Originally Posted by dmatre

dmatre

Thank you guys, i appreciate your feedback.

I wanted something that will provide a bit of cut with right pad and then polish off with another pad.

After polishing I would be applying Opti-seal.

I'm on the fence between Optimum Hyper Polish and SONAX ProfiLine Perfect Finish.

[William Urban]

I prefer Optimum products. But I think it's worth a try.