[Andrew3424]

Hey guys so I just completed my full build changed everything from turbos, intercooler literally every bolt on possible. I also upgraded to m factory single mass flywheel and spec stage 3+ clutch. Changed my master clutch slave , guido, throw out bearing, Clutch Pilot Bearing, Driveshaft Center Carrier, and transmission mounts. Didn't find out that I shouldn't of touched my clutch pilot bearing until it was to late. Was a huge pain in the ass to get off heating it up and using all different removal tools, and dremeling it off we finally got it off. Put the car back together and now I here a lot of noise coming from my transmission attached is a video. If anyone has any idea and could help me out it would be much appreciated. Thanks

[IllSic_Design]

No video is attached

[Andrew3424]

Originally Posted by IllSic_Design

No video is attached

Originally Posted by IllSic_Design

No video is attached

Updated sorry thanks

[Andrew3424]

At idle there is a rattling noise and upon acceleration it gets louder the faster I go

[Andrew3424]

Originally Posted by Andrew3424

At idle there is a rattling noise and upon acceleration it gets louder the faster I go

Bump anyone 🤞🏻🤞🏻

[WoodE30]

Originally Posted by Andrew3424

Bump anyone 🤞🏻🤞🏻

You do know that a SMF makes a lot of noise, right? Does the noise ever stop? Like when you push the clutch in?

[nissubaru]

I've got a steel SMFW and a Spec Stage 2+ clutch and my car doesn't sound like that. That sounds like knocking, look up videos on youtube of how it should sound. To me it sounds like a tractor

[Andrew3424]

Originally Posted by WoodE30

You do know that a SMF makes a lot of noise, right? Does the noise ever stop? Like when you push the clutch in?

Originally Posted by WoodE30

You do know that a SMF makes a lot of noise, right? Does the noise ever stop? Like when you push the clutch in?

Yea am well aware of the smf chatter. I lucked out on this one ended up just being the heat shield rubbing against my drive shaft

[Andrew3424]

Originally Posted by nissubaru

I've got a steel SMFW and a Spec Stage 2+ clutch and my car doesn't sound like that. That sounds like knocking, look up videos on youtube of how it should sound. To me it sounds like a tractor

Originally Posted by WoodE30

You do know that a SMF makes a lot of noise, right? Does the noise ever stop? Like when you push the clutch in?

Ended up just being my heat shield running against my driveshaft. Probably got stepped on a bunch of times when it was sitting on the floor during the build. Bent it out of the way and good Togo

[WoodE30]

Originally Posted by Andrew3424

Yea am well aware of the smf chatter. I lucked out on this one ended up just being the heat shield rubbing against my drive shaft

Good to hear!