[ckanderson]

Originally Posted by Greyfox

There is a 2019 out that goes on one 32gb USB....

TBH for the hassle I won't do it again, plus my cell phone works so much better

[vilord]

Originally Posted by ckanderson

For the smoke smell, wipe down all the plastic and leather surfaces with a light cleaner, that makes a huge difference.

I bought a Ram 2500 out of Texas that was smoked in by the PO. After 3-4 Ozone treatments and wiping down all the plastic, you couldn't tell it was smoked in.

The guy I bought it from detailed the interior trying to hide the smoke smell... had 5 different clip-in "air fresheners" in the vents. Used so much cleanser that the window controls shorted out.

I'll see what I've got for a multi-purpose cleaner and do it again, though, I trust the seller's cleaning abilities as much as I trust his comments about how it was "always dealer serviced and fully up to date on maintenance"

[vilord]

Originally Posted by ckanderson

TBH for the hassle I won't do it again, plus my cell phone works so much better

This is why I'm doing an NBT retrofit with carplay... so I can use google maps or waze in the dash.

[ckanderson]

Originally Posted by vilord

The guy I bought it from detailed the interior trying to hide the smoke smell... had 5 different clip-in "air fresheners" in the vents. Used so much cleanser that the window controls shorted out.

I'll see what I've got for a multi-purpose cleaner and do it again, though, I trust the seller's cleaning abilities as much as I trust his comments about how it was "always dealer serviced and fully up to date on maintenance"

If its still there after wiping it down using a carpet cleaner will help, also these work surprisingly well

https://adamspolishes.com/adam-s-odo...BoCnCQQAvD_BwE

[S65Hunter]

Originally Posted by DirtKurt

Installed a gen 6 camaro ss differential.

Go on.....

[6ixSpd]

Took advantage of the mild winter weather lately to give it a long overdue wash. It was baked in dirt and salt to the point where neither license plate was even visible anymore, lol.

Waxed and sealed it, cleaned up the interior and conditioned the trim/dashboard/door panels as well. Should be protected for the next few months now...163k miles and counting!

[DirtKurt]

Originally Posted by Emilime75

Hold up...waaaiiiittt.... You can't drop a nugget like that and run out of the room. Will need details.

Hahaa, was seeing if anyone would notice. In the process of converting from 6at to dct and had to decide what to do about the rear diff. Options were sourcing a 2.56 from a dct car and having a lsd installed. That would give me a expensive setup with a weak input shaft. Next option was running an m3 setup and having 2.81 gears installed which are nearly impossible to find and expensive to install. 3rd option was to go custom. Found out the gen 6 camaro ss with the 8sp run a 2.77 rear diff with a clutch type lsd and internal cooler. Found one on ebay, built custom mounts and have custom stage 5 shafts being built.

[Abdul munim]

I gave the inside a good detailed clean.

[Emilime75]

Originally Posted by DirtKurt

Hahaa, was seeing if anyone would notice. In the process of converting from 6at to dct and had to decide what to do about the rear diff. Options were sourcing a 2.56 from a dct car and having a lsd installed. That would give me a expensive setup with a weak input shaft. Next option was running an m3 setup and having 2.81 gears installed which are nearly impossible to find and expensive to install. 3rd option was to go custom. Found out the gen 6 camaro ss with the 8sp run a 2.77 rear diff with a clutch type lsd and internal cooler. Found one on ebay, built custom mounts and have custom stage 5 shafts being built.

Nice! Please do a write up with photos. This is the kind of shit that's needed and makes this place great.

[unrulyteach]

Originally Posted by 6ixSpd

Took advantage of the mild winter weather lately to give it a long overdue wash. It was baked in dirt and salt to the point where neither license plate was even visible anymore, lol.

Waxed and sealed it, cleaned up the interior and conditioned the trim/dashboard/door panels as well. Should be protected for the next few months now...163k miles and counting!

I'm jealous of the color

[nsjames]

camaro diff is a sweet setup.
I know there'res people doing 8.8 diffs as well, how does the camaro diff stand up in terms of strength?

8.8s, properly setup, are about 95% of the way to a 9" in terms of NFG abuse taking.

[DirtKurt]

Originally Posted by nsjames

camaro diff is a sweet setup.
I know there'res people doing 8.8 diffs as well, how does the camaro diff stand up in terms of strength?

8.8s, properly setup, are about 95% of the way to a 9" in terms of NFG abuse taking.

They havent been out for a long time like the 8.8 or 9" but they seem to be pretty stout pieces. There are several gen 6 ss camaros in the deep 8's running them with littlest or no modifications. The key for me was the super low gear ratio needed with the 7 spd dct. This will be the first in a bmw but i dont forsee any major issues.

[nsjames]

Originally Posted by DirtKurt

They havent been out for a long time like the 8.8 or 9" but they seem to be pretty stout pieces. There are several gen 6 ss camaros in the deep 8's running them with littlest or no modifications. The key for me was the super low gear ratio needed with the 7 spd dct. This will be the first in a bmw but i dont forsee any major issues.

I'm curious about the internal cooler, since I know some s550 mustang people that struggle with diff oil temps at the track.

apparently it's pretty easy to hit 250+ in the diff after a few laps.

[NathanK24]

Had Blizzak LM-25 winter tires mounted on stock 17" tims. Apparently my TPM sensor cores were starting to corrode, so tech replaced them, plus driver front sensor itself. That sensor threw a code driving home, but shop will gladly fix sometime soon. If anyone needs work in southeast MI, Vast performance (Ferndale) is a pleasure to work with. They do a lot of tuning as well.

[4 Doors]

Ordered a water pump and thermostat after mine decided to go out a few days before Christmas travel...

Hoping to have this done by Saturday! Luckily I recognized it before overheating and ran the codes after hearing my radiator fan run like a diesel truck. All part of the E9X experience

[hellokitty]

Took off all 4 corners and detailed the wheel barrels and wheel well. Holiday PTO + boredom + a bit of OCD will do that to ya!

[GQBlue]

Originally Posted by hellokitty

Took off all 4 corners and detailed the wheel barrels and wheel well. Holiday PTO + boredom + a bit of OCD will do that to ya!

What kind of floor jack is that? in the market for one rather not pay $200 since my car is lowered

[hellokitty]

Originally Posted by GQBlue

What kind of floor jack is that? in the market for one rather not pay $200 since my car is lowered

AC Hydraulic

https://www.pelicanparts.com/catalog...ACHyd1_pg2.htm

[Nickco43]

I put a NBT in my car



First impressions this is not a "huge" upgrade from a nice CIC setup. It was a lot of aggravation for what is really just a flex.

[NitroKing]

Blacked out Roundel

[tony55343]

Finally got around to installing my front bumper smoked reflectors that I have had for two months. Originally I went out to do it when I got them and seemed like too much hassle, finally got em on last night and they look much better!!

[hellokitty]

Cleaned out the F80 oil cooler and radiator of leaves, styrofoam and bumble bees using the Husky grabber tool. It also has a LED light built in at the grabber end. Pretty awesome find for $8!