|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
**HELP**Steering wheel angle sensor -INPA
|
|
03-25-2014, 08:50 AM | #1 |
Registered
1
Rep 2
Posts |
**HELP**Steering wheel angle sensor -INPA
Hi, in last days i have seen some advise on my dash board. Lights are DSC, ABS, DBC and PRESSURE SENSORS. I spend my time reading a lot of forums and find that maybe this issue of this failure can come from a sensor wheel malfunction. I check al four sensors from each wheel on INPA and it seems to work weel. I also check the DSC sensors and i see that a strange value is on the Steering wheel angle sensor. Can someone explain me what it means and if the value is correct or not. Sorry for the mistakes, i know my english is crap. Thanks.
Last edited by killeribz; 03-26-2014 at 10:36 AM.. |
04-04-2014, 03:50 AM | #5 |
Private First Class
17
Rep 157
Posts
Drives: 2008 135i
Join Date: Dec 2013
Location: Door County
|
I just resolved this issue a few days ago, didn't have DIS and inpa didn't want to cooperate to do the calibration. As stated above code to default with ncsexpert. I also ran the "SG reset" (something along those lines) with ncsexpert. Next I used tool32 to calibrate the steering sensor via loading the DSC 87 module and running job "lenkwinkel dsc abgleichen". Ayer that I simply went to inpa and loaded dcs. Then go to activate and F8 I believe to reset CBS since you would've reset the module by this step. Then I did all of the resets and calibrations on the left hand side. Some of that may not be necessary since my situation was most likely different.
You should post your error memory from you DSC for more help. |
Appreciate
0
|
04-27-2014, 08:45 AM | #6 |
Captain
81
Rep 885
Posts |
I am very interested in the solution. My dash just popped the same warnings. With my BT cable the only code showing is the Steering Angle Sensor. I would love to find a diy of any kind besides the .02 fix. Even if I have to buy the new part for $500 I would love to code it myself. I have inpa, BT cable, and ncsexpert. But, I am not an expert at the programs so a walk through would be best
__________________
|
Appreciate
0
|
Bookmarks |
|
|