|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
Problems with the E90 :/
|
 |
| 11-30-2022, 11:11 PM | #1 |
|
Private
 
7
Rep 74
Posts |
Problems with the E90 :/
Have a few different problems with the car, specs and mods are listed below
2009 335i 6MT Intakes, Inlets, LPFP, DPs, OCC, IC, 17t turbos Car is currently running MHD Stage 2+ as I am waiting on my custom tune Problem 1: Fuel gauge is incorrect after LPFP build. I did not remove the fuel float when i built it so it should not be off Problem 2: Blower fan randomly cuts in and out Problem 3: Misfires in bank 2, no other codes to support, stops misfiring after a few minutes or if codes are cleared, cyl 5 seems to be most problematic, then 4, then 6, but all 3 are common misfires here. Car has index 12s, pr coils, and 1 step plugs Will attach log below
__________________
2009 E90 335i 6M/T
VRSF DCIs, ARM Charge Pipe, Tial BOV, Precision Raceworks Coil Packs, ARM Catless Downpipes, Boost Monkey Cowl Delete Filters, 2" Silicone Inlets, 17t Turbos, ECS Coilovers, Turner Front End Links, Walbro 535 LPFP, BMS High Side Catch Can, ARM 7" IC, 335is Clutch Kit, MHD Stage2+ 93 Oct. Last edited by lemansbluen54; 12-28-2022 at 04:30 PM.. Reason: updated information |
| 12-28-2022, 04:43 PM | #3 |
|
Private
7
Rep 74
Posts |
here is the log
it appears that stft bank 2 is sitting between 3-5% below bank 1 constantly
__________________
2009 E90 335i 6M/T
VRSF DCIs, ARM Charge Pipe, Tial BOV, Precision Raceworks Coil Packs, ARM Catless Downpipes, Boost Monkey Cowl Delete Filters, 2" Silicone Inlets, 17t Turbos, ECS Coilovers, Turner Front End Links, Walbro 535 LPFP, BMS High Side Catch Can, ARM 7" IC, 335is Clutch Kit, MHD Stage2+ 93 Oct. |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
