Jehnert XE200 flatline install question

cvsnowboarder · 08-22-2015, 02:35 PM

Hi, I have a 2009 335i e93 conv. I have the HIFI factory stereo. I have a Jl Audio Xd600/6 running Helix Match components up front,rear stock speakers, and I had Earthquake SWSXi 2 ohm 8" subs under the seats ( which sounded horrible) but I blew them. I also have a 10" sealed Kicker box in trunk running off a Jl Audio XD600/1 mono amp. A technic harness was used to install as well as the Technic sub wire connectors / adapter rings for Earthquakes. Anyway I am thinking about getting the Jehnert XE200 Flatline 8" underseat subs.

How would an installer install the Jehnert XE200 Flatline 8" subs? Meaning do they need a filter or crossover on the subs? How do I set the JL Audio crossover on the xd600/6 ( they would be on channels 5/6) ?

Thanks, Gen

cdgatti · 08-22-2015, 02:56 PM

Just low pass around 180 hz

cvsnowboarder · 08-22-2015, 03:36 PM

So you mean I do this on the JL audio xd600/6 ?

cdgatti · 08-22-2015, 04:45 PM

yep run channel 5/6 to the jehnerts set to LP around 180 hz.

cvsnowboarder · 08-22-2015, 11:50 PM

I wouldn't benefit from using fmods ?

kaigoss69 · 08-23-2015, 06:11 AM

You don't want the sub and underseats playing the same frequencies. It'll lead to cancellations. Also, the Jehnerts are not designed to play frequencies below say 50Hz. If you do, you might blow them. You need Fmods, or a sound processor.

08-22-2015, 02:35 PM	#1
cvsnowboarder cvsnowboarder 12 Rep 128 Posts Drives: 2009 335i E93 Convertible Join Date: Apr 2014 Location: Plymouth, MA iTrader: (0)	Jehnert XE200 flatline install question Hi, I have a 2009 335i e93 conv. I have the HIFI factory stereo. I have a Jl Audio Xd600/6 running Helix Match components up front,rear stock speakers, and I had Earthquake SWSXi 2 ohm 8" subs under the seats ( which sounded horrible) but I blew them. I also have a 10" sealed Kicker box in trunk running off a Jl Audio XD600/1 mono amp. A technic harness was used to install as well as the Technic sub wire connectors / adapter rings for Earthquakes. Anyway I am thinking about getting the Jehnert XE200 Flatline 8" underseat subs. How would an installer install the Jehnert XE200 Flatline 8" subs? Meaning do they need a filter or crossover on the subs? How do I set the JL Audio crossover on the xd600/6 ( they would be on channels 5/6) ? Thanks, Gen
	Appreciate 0 Tweet Quote

08-22-2015, 02:56 PM	#2
cdgatti Colonel 255 Rep 2,547 Posts Drives: e90 328i Join Date: May 2011 Location: KY iTrader: (4)	Just low pass around 180 hz __________________ OEM Black grill and Blackline tails - LCI halogens with Lux V2 coded as DRL - 3M Crystalline - BMS PBX - OEM Euro Airbox with K&N - Hardwired CTEK - Bilstein B6 w/OEM springs and SP perches - Conti DWS06 - HiFi-Helix DSP - JLAudio HD/XD-Morel - CD changer trim - AE optical out
	Appreciate 0 Quote

08-22-2015, 03:36 PM	#3
cvsnowboarder cvsnowboarder 12 Rep 128 Posts Drives: 2009 335i E93 Convertible Join Date: Apr 2014 Location: Plymouth, MA iTrader: (0)	So you mean I do this on the JL audio xd600/6 ?
	Appreciate 0 Quote

08-22-2015, 04:45 PM	#4
cdgatti Colonel 255 Rep 2,547 Posts Drives: e90 328i Join Date: May 2011 Location: KY iTrader: (4)	yep run channel 5/6 to the jehnerts set to LP around 180 hz. __________________ OEM Black grill and Blackline tails - LCI halogens with Lux V2 coded as DRL - 3M Crystalline - BMS PBX - OEM Euro Airbox with K&N - Hardwired CTEK - Bilstein B6 w/OEM springs and SP perches - Conti DWS06 - HiFi-Helix DSP - JLAudio HD/XD-Morel - CD changer trim - AE optical out
	Appreciate 0 Quote

08-22-2015, 11:50 PM	#5
cvsnowboarder cvsnowboarder 12 Rep 128 Posts Drives: 2009 335i E93 Convertible Join Date: Apr 2014 Location: Plymouth, MA iTrader: (0)	I wouldn't benefit from using fmods ?
	Appreciate 0 Quote

08-23-2015, 06:11 AM	#6
kaigoss69 Brigadier General 300 Rep 3,969 Posts Drives: '08 335i Join Date: Jul 2008 Location: JAX iTrader: (6)	You don't want the sub and underseats playing the same frequencies. It'll lead to cancellations. Also, the Jehnerts are not designed to play frequencies below say 50Hz. If you do, you might blow them. You need Fmods, or a sound processor. __________________ Mobridge DA2 > JBL MS-8 > ARC XDi 600/4 > JBL Gti 408 Mids & Vifa OT19 Tweeters; PG Ti2 1600.5 > Morel HCW-10 & IDMax 15
	Appreciate 0 Quote