Bimmer Geeks Pro Tool

Saif2018 · 07-14-2019, 04:29 PM

Is there a way to increase automatic wiper sensitivity?

The preset options don't seem increase sensitivity even when I increase it using the stalk.

apexit4 · 07-26-2019, 08:33 AM

Can anyone confirm if ProTool is able to load MSD80.prg (traditionally available in Tool32) and read/modify cbs_daten_lesen and cbs_reset?

tdott · 07-26-2019, 04:06 PM

Quote:

Originally Posted by Devildog0905

Ok. I have read numerous posts and have spend countless hours trying to figure this out. I have the protool app and I'm trying to delete the TPMS. I have coded other functions (door locks, lights,etc) and I was able to reset my fuel pump control module with success. I don't understand what I am looking for to delete the TPMS. Can someone please take a couple screen shots or something to help me. I would greatly appreciate it.

**I already disconnected the module next to the battery, in the trunk**

Not sure how to do it with ProTool but this is how it's done using NCS. You might be able to change the same values using expert mode.

https://www.m3post.com/forums/showth...ght=FTM+Coding

type-dRew · 08-27-2019, 10:13 AM

Can the analog speedometer be corrected with ProTool?

I'm told Carly can do it, but id rather use a bimmergeeks product.

gamesfrager · 08-27-2019, 11:58 AM

Quote:

Originally Posted by type-dRew

Can the analog speedometer be corrected with ProTool?

I'm told Carly can do it, but id rather use a bimmergeeks product.

Yes, I saw the option to adjust analog and another option to adjust digital (if you have that enabled)

type-dRew · 08-27-2019, 12:01 PM

Quote:

Originally Posted by gamesfrager

Yes, I saw the option to adjust analog and another option to adjust digital (if you have that enabled)

Fantastic. Thank you

mweisdorfer · 08-29-2019, 05:52 PM

Quote:

Originally Posted by colorado.e9x

Quote:

Originally Posted by Jagtem

Quote:

Originally Posted by colorado.e9x

My headlights are on 100% of the time when in auto mode. Don't know why. Is there a fix?

Play around with some of the DRL settings in the FRM? There are a few different settings. Otherwise maybe the switch or the sensor is borked?

My DRLs in the BC menu are off, I'll mess with some of the coding options and see if I can find anything

I'm 99% positive you can't make your angel eyes your DRL's with an FRM 1 module. You will have to buy a used FRM 2 module on eBay for $75-125.00 and code it to the car.

That's the cheapest way. I've done it.

colorado.e9x · 08-29-2019, 06:26 PM

Quote:

Originally Posted by mweisdorfer

Quote:

Originally Posted by colorado.e9x

Quote:

Originally Posted by Jagtem

Quote:

Originally Posted by colorado.e9x

My headlights are on 100% of the time when in auto mode. Don't know why. Is there a fix?

Play around with some of the DRL settings in the FRM? There are a few different settings. Otherwise maybe the switch or the sensor is borked?

My DRLs in the BC menu are off, I'll mess with some of the coding options and see if I can find anything

I'm 99% positive you can't make your angel eyes your DRL's with an FRM 1 module. You will have to buy a used FRM 2 module on eBay for $75-125.00 and code it to the car.

That's the cheapest way. I've done it.

There's a way, it just involves splicing the code from an FRM2/3 into the FRM1. I don't have a very good understanding on how to do it myself. I'll be buying an FRM2/3 in the future

mweisdorfer · 08-29-2019, 08:29 PM

Quote:

Originally Posted by colorado.e9x

Quote:

Originally Posted by mweisdorfer

Quote:

Originally Posted by colorado.e9x

Quote:

Originally Posted by Jagtem

Quote:

Originally Posted by colorado.e9x

My headlights are on 100% of the time when in auto mode. Don't know why. Is there a fix?

Play around with some of the DRL settings in the FRM? There are a few different settings. Otherwise maybe the switch or the sensor is borked?

My DRLs in the BC menu are off, I'll mess with some of the coding options and see if I can find anything

I'm 99% positive you can't make your angel eyes your DRL's with an FRM 1 module. You will have to buy a used FRM 2 module on eBay for $75-125.00 and code it to the car.

That's the cheapest way. I've done it.

There's a way, it just involves splicing the code from an FRM2/3 into the FRM1. I don't have a very good understanding on how to do it myself. I'll be buying an FRM2/3 in the future

Go FRM 2.

The FRM 3 can be problematic from what I have read.

flgfish · 08-29-2019, 09:31 PM

Man, I wish I had an android device. May look for an old tablet just to run this tool.

Serf27 · 08-29-2019, 11:10 PM

Quote:

Originally Posted by flgfish

Man, I wish I had an android device. May look for an old tablet just to run this tool.

I used the app with the cheapest tablet they had at Walmart. About $48?
Not the best tablet but it worked for the app.

4 Doors · 08-30-2019, 12:27 PM

Quote:

Originally Posted by flgfish

Man, I wish I had an android device. May look for an old tablet just to run this tool.

Just buy a tablet off of Amazon.

Serf27 · 08-31-2019, 05:55 AM

Does anyone know what option in the frm module has to be coded so halon high beams work in a xenon equipped car?
All else works, and i read somewhere something had to be coded for the high beams to properly work.

Thanks.

415cpa · 08-31-2019, 07:45 PM

Hey guys, will any ELM bluetooth adapter work with the protool? I'm currently using the bimmergeeks k+dcan cable with a usb adapter which works great. But I have a veepak ELM obd adapter which I used with the torque and dash command apps. Wondering if it would work with protool.

Insane435 · 10-12-2019, 03:11 PM

Help!

Was trying to add ftm. I disabled 2vb and went to default code kombi like i was told. Now my gauhes dont work and it has alot of errors and beeps at me. What happened and how do infix?

OCG335i · 11-08-2019, 09:18 PM

Hey guys, i figured this would be where i can ask. i have E92 and after market fog lights. does anyone know how to code out the fog light error? i have both options on Protools and i cannot figure it out.

sdbmwcoding · 11-08-2019, 09:41 PM

Quote:

Originally Posted by OCG335i

Hey guys, i figured this would be where i can ask. i have E92 and after market fog lights. does anyone know how to code out the fog light error? i have both options on Protools and i cannot figure it out.

Disable cold and warm monitors for front fog lights in the FRM module

OCG335i · 11-08-2019, 09:45 PM

thank you! been trying to figure it out for a couple days now. first time coding and still trying to learn

Serf27 · 11-08-2019, 09:45 PM

I’m going to make a video on everything this app can do for the e9x model. Stay tuned.

OCH335i from the main menu
Safety-frm module-Coding-standard

Find right fog light cold check, click it and click disable

Find the right fog light warm check and also disable it.

Do the same for the left side then click finalize.

OCG335i · 11-10-2019, 01:29 AM

Quote:

Originally Posted by Serf27

I’m going to make a video on everything this app can do for the e9x model. Stay tuned.

OCH335i from the main menu
Safety-frm module-Coding-standard

Find right fog light cold check, click it and click disable

Find the right fog light warm check and also disable it.

Do the same for the left side then click finalize.

Perfect! Finally had time to code it out! Thank you 🙏🏼

pelon222 · 11-14-2019, 03:36 PM

Quote:

Originally Posted by Insane435

Help!

Was trying to add ftm. I disabled 2vb and went to default code kombi like i was told. Now my gauhes dont work and it has alot of errors and beeps at me. What happened and how do infix?

something similar happened to me, I was trying to code my combox, after coding CAS & FRM protocol asked if I wanted to code suggested modules including kombi, I said yes, and my gauges stopped working. I had to code everything back to stock and then just code each module separately.

pelon222 · 11-14-2019, 03:38 PM

Quote:

Originally Posted by Serf27

Does anyone know what option in the frm module has to be coded so halon high beams work in a xenon equipped car?
All else works, and i read somewhere something had to be coded for the high beams to properly work.

Thanks.

Might have to do some additional wiring for them to work, try searching for xenon retrofit. What did you code Trying to do the same next week.

07-14-2019, 04:29 PM	#309
Saif2018 Brigadier General 973 Rep 3,219 Posts Drives: E90 335i Join Date: Jan 2019 Location: UK iTrader: (0)	Is there a way to increase automatic wiper sensitivity? The preset options don't seem increase sensitivity even when I increase it using the stalk.
	Appreciate 0 Quote

07-26-2019, 08:33 AM	#310
apexit4 Major 1231 Rep 1,101 Posts Drives: 335D M-Sport, X5D Join Date: Apr 2018 Location: Maryland iTrader: (0)	Can anyone confirm if ProTool is able to load MSD80.prg (traditionally available in Tool32) and read/modify cbs_daten_lesen and cbs_reset?
	Appreciate 0 Quote

08-27-2019, 10:13 AM	#312
type-dRew Major 641 Rep 1,245 Posts Drives: 2009 335i xDrive Join Date: Feb 2019 Location: Newport MI iTrader: (0)	Can the analog speedometer be corrected with ProTool? I'm told Carly can do it, but id rather use a bimmergeeks product. __________________ 2009 335i xDrive AT / 177k+ miles PSP 750ic / Fuel-It! Stage 1 / BMS CP / Sutphin Tuning / RFP E50 11.61 @ 117.5 New setup; Covid 19Ts on RFP 93 + ARM inlets, dp, VTT cp and PSP outlets
	Appreciate 0 Quote

08-29-2019, 09:31 PM	#318
flgfish Private First Class 128 Rep 137 Posts Drives: 2012 E91, 2015 911 C2 Join Date: Aug 2019 Location: Houston, TX iTrader: (1)	Man, I wish I had an android device. May look for an old tablet just to run this tool.
	Appreciate 0 Quote

08-31-2019, 05:55 AM	#321
Serf27 Brigadier General 2851 Rep 4,322 Posts Drives: 335i Join Date: Apr 2018 Location: Sitting in a BMW. iTrader: (-1)	Does anyone know what option in the frm module has to be coded so halon high beams work in a xenon equipped car? All else works, and i read somewhere something had to be coded for the high beams to properly work. Thanks.
	Appreciate 0 Quote

08-31-2019, 07:45 PM	#322
415cpa Private 22 Rep 92 Posts Drives: M5 Join Date: Nov 2009 Location: SF iTrader: (0)	Hey guys, will any ELM bluetooth adapter work with the protool? I'm currently using the bimmergeeks k+dcan cable with a usb adapter which works great. But I have a veepak ELM obd adapter which I used with the torque and dash command apps. Wondering if it would work with protool.
	Appreciate 0 Quote

10-12-2019, 03:11 PM	#323
Insane435 Major 477 Rep 1,467 Posts Drives: 435ix M Sport EWG Join Date: Jul 2016 Location: Michigan iTrader: (1)	Help! Was trying to add ftm. I disabled 2vb and went to default code kombi like i was told. Now my gauhes dont work and it has alot of errors and beeps at me. What happened and how do infix?
	Appreciate 0 Quote

11-08-2019, 09:18 PM	#324
OCG335i Registered 0 Rep 3 Posts Drives: 2012 E92 335XI 6MT Join Date: Nov 2019 Location: Orange County iTrader: (0)	Hey guys, i figured this would be where i can ask. i have E92 and after market fog lights. does anyone know how to code out the fog light error? i have both options on Protools and i cannot figure it out.
	Appreciate 0 Quote

11-08-2019, 09:45 PM	#326
OCG335i Registered 0 Rep 3 Posts Drives: 2012 E92 335XI 6MT Join Date: Nov 2019 Location: Orange County iTrader: (0)	thank you! been trying to figure it out for a couple days now. first time coding and still trying to learn
	Appreciate 0 Quote

11-08-2019, 09:45 PM	#327
Serf27 Brigadier General 2851 Rep 4,322 Posts Drives: 335i Join Date: Apr 2018 Location: Sitting in a BMW. iTrader: (-1)	I’m going to make a video on everything this app can do for the e9x model. Stay tuned. OCH335i from the main menu Safety-frm module-Coding-standard Find right fog light cold check, click it and click disable Find the right fog light warm check and also disable it. Do the same for the left side then click finalize.
	Appreciate 0 Quote