|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
"Changes may require STAT_BSZ_WERT=0" How to do this?
|
|
11-09-2015, 06:17 AM | #1 |
Lieutenant Colonel
596
Rep 1,693
Posts |
"Changes may require STAT_BSZ_WERT=0" How to do this?
Hi,
I've flashed the correct PPK (Performance Power Kit) ZB number for my 335i but now I get error 2FA4 - Wrong data set. Car drives at reduced power. I suspect the fix is to change "OLULCODIERUNG" (High/Low power class coding) to "wert_01" (Medium power) or "wert_02" (High power) for the code to go away. NCSDummy states "Changes may require STAT_BSZ_WERT=0" and sure enough, if I try to code the different codes and I read the data back, the codes did not apply. After a bit of reading, STAT_BSZ_WERT=0 means to reset engine operation hours to zero. How do I do this? Cheers |
11-09-2015, 07:14 PM | #2 |
Colonel
529
Rep 2,503
Posts |
Hmm, power change needs this I think:
1. CAS change CLASS_PWR keine > klasse_2 2. in DME change OLULCODIERUNG wert_00 > wert_02 I guess it similar. For hours reset I would think tool32 is your friend. Have a look through the jobs for your engine ECU. |
Appreciate
0
|
Bookmarks |
|
|