[bikoo]

dears i got the below report from inpa would you pls help

I N F O R M A T I O N M E M O R Y ---------------------------------------
Date: 11.08.2017 05:09:18 ECU: GS19B JobStatus: OKAY Variant: GS19B-------------------------------------------------------------
RESULT: 4 error in error memory !-------------------------------------------------------------
4F86 transmission ratio symptom speed monitoring
Error counter: 255
1. Umweltsatz Mileage 48536 km condition WK torque converter-clutch open 0-n Type of Shift Type of Shift 1 after 2 0-n actual engine torque 164.00 Nm Gearbox Oil Temperature 48.00 degrees C Output Speed 672.00 rpm
2. Umweltsatz Mileage 82576 km condition WK torque converter-clutch open 0-n Type of Shift Type of Shift 1 after 2 0-n actual engine torque 116.00 Nm Gearbox Oil Temperature 96.00 degrees C Output Speed 512.00 rpm
3. Umweltsatz Mileage 221560 km condition WK torque converter-clutch controlled 0-n Type of Shift Type of Shift 4 after 5 0-n actual engine torque 68.00 Nm Gearbox Oil Temperature 82.00 degrees C Output Speed 2400.00 rpm
symptom gear monitoring Test conditions not yet fulfilled Error not present now, but already stored Error would not cause a warning lamp to light up
Error code: 4F 86 38 FF 17 B3 08 42 58 15 28 52 08 36 88 10 6C 2F 2B 2A 7A 4B-------------------------------------------------------------
5119 Reset at the Bosch SW-part
Error counter: 110
1. Umweltsatz Mileage 82704 km Engine speed 1152.00 rpm Output Speed 0.00 rpm timepoint des Resets Reset in use 0-n last exception number before reset 2.00 -
2. Umweltsatz Mileage 88640 km Engine speed 1760.00 rpm Output Speed 736.00 rpm

timepoint des Resets Reset in use 0-n last exception number before reset 2.00 -
3. Umweltsatz Mileage 222224 km Engine speed 3328.00 rpm Output Speed 0.00 rpm timepoint des Resets Reset in use 0-n last exception number before reset 255.00 -
Unknown type of error Test conditions fulfilled Error present now and already stored Error would not cause a warning lamp to light up
Error code: 51 19 60 6E 28 62 24 00 03 02 2B 48 37 17 03 02 6C 82 68 00 03 FF-------------------------------------------------------------
5118 info counter 1 - EGS-Reset
Error counter: 110
1. Umweltsatz Mileage 82704 km Gearbox Oil Temperature 36.00 degrees C Battery Voltage 11.84 Volt substrate temperature 36.00 degrees C time after reset/ignition OFF-ON 60.00 ms
2. Umweltsatz Mileage 88640 km Gearbox Oil Temperature 75.00 degrees C Battery Voltage 14.08 Volt substrate temperature 75.00 degrees C time after reset/ignition OFF-ON 60.00 ms
3. Umweltsatz Mileage 222224 km Gearbox Oil Temperature 42.00 degrees C Battery Voltage 14.00 Volt substrate temperature 43.00 degrees C time after reset/ignition OFF-ON 60.00 ms
EGS-Reset Test conditions fulfilled Error present now and already stored Error would not cause a warning lamp to light up
Error code: 51 18 68 6E 28 62 4C 94 4C 02 2B 48 73 B0 73 02 6C 82 52 AF 53 02-------------------------------------------------------------
5113 info counter 2 - DME-forced highswitching
Error counter: 108
1. Umweltsatz Mileage 168616 km Gearbox Oil Temperature 74.00 degrees C substrate temperature 75.00 degrees C condition WK torque converter-clutch open 0-n Type of Shift Type of Shift 2 after 1 0-n Status Substrate temp. (0=OK, 1=F/ES) 0.00 0/1

status transmission oil temperature (0=OK, 1= F/ES) 0.00 0/1 Status Park block sensor (0=OK, 1=F/ES) 0.00 0/1 Status Position sensor (0=OK, 1=F/ES) 0.00 0/1 Status Turbine speed (0=OK, 1=F/ES) 0.00 0/1 status output speed (0=OK, 1= F/ES) 0.00 0/1
2. Umweltsatz Mileage 168616 km Gearbox Oil Temperature 74.00 degrees C substrate temperature 75.00 degrees C condition WK torque converter-clutch open 0-n Type of Shift Type of Shift R to R 0-n Status Substrate temp. (0=OK, 1=F/ES) 0.00 0/1 status transmission oil temperature (0=OK, 1= F/ES) 0.00 0/1 Status Park block sensor (0=OK, 1=F/ES) 0.00 0/1 Status Position sensor (0=OK, 1=F/ES) 0.00 0/1 Status Turbine speed (0=OK, 1=F/ES) 0.00 0/1 status output speed (0=OK, 1= F/ES) 0.00 0/1
3. Umweltsatz Mileage 221208 km Gearbox Oil Temperature 83.00 degrees C substrate temperature 84.00 degrees C condition WK torque converter-clutch controlled 0-n Type of Shift Type of Shift 6 after 6 0-n Status Substrate temp. (0=OK, 1=F/ES) 0.00 0/1 status transmission oil temperature (0=OK, 1= F/ES) 0.00 0/1 Status Park block sensor (0=OK, 1=F/ES) 0.00 0/1 Status Position sensor (0=OK, 1=F/ES) 0.00 0/1 Status Turbine speed (0=OK, 1=F/ES) 0.00 0/1 status output speed (0=OK, 1= F/ES) 0.00 0/1
forced step up 5-6 by DME Test conditions not yet fulfilled Error present now and already stored Error would not cause a warning lamp to light up
Error code: 51 13 78 6C 52 55 72 73 11 00 52 55 72 73 07 00 6C 03 7B 7C 26 00 ===========================================

[NZ_BMW_NUT]

Bikoo did you ever resolve these issues? I have the exact same thing happening in my car and decided to shotgun method replace the trans and its still happening. I know I am reviving an old thread but I need the help