[bmwm3redblack]

Yesterday i installed AA bov kit and when i put the vacuum line on the bov's nipple, and started engine,the bov's opened on idle and when i floored the gas it wasn't produced proper whoosh sound? So i thought may be i need to adjust it myself?
AA owners please help?

[Jeff@TopGearSolutions]

It does not need adjusting if it's installed correctly.

You need to build boost to get a "whoosh". There is not much load at idle.

Drive the car and see how it performs.

[bmwm3redblack]

Well Jeff thank you for the answer, I remember you offered me another bov's options, but i went with AA
I installed everything correctly, but as i said my bov is open at idle is this ok???
I thought it should be closed !!!???

[Jeff@TopGearSolutions]

Originally Posted by bmwm3redblack

Well Jeff thank you for the answer, I remember you offered me another bov's options, but i went with AA
I installed everything correctly, but as i said my bov is open at idle is this ok???
I thought it should be closed !!!???

It should be slightly open at idle.
Closed while revving.
Open fully when heavy throttle is released.
(assuming it functions like a Tial).

When in doubt AA is more then welcome to offer troubleshooting and customer service/support for their products.

[BlackBB6]

My AA BOV would be partially open on warm up and idle too, and as Jeff mentioned you won't hear a whoosh if you rev it while in neutral.

[bmwm3redblack]

I tighten all up, and my bov now looks like jeff said slithtly open on idle, and fully open on when heavy throttle released!!!

[bmwm3redblack]

And the sound is proper on wot throttle release,.
Now it feels better! Thanks for your answers guys!!!

BTW what about steering tank have you moved, modified it???