335D Catch Can Install Completed.

Gallo24 · 04-15-2019, 04:31 PM

PM'd for kit

BMMal · 07-20-2019, 03:54 PM

Are you still selling these kits? I'd like to buy one.

Darkswarmer · 12-13-2019, 02:03 PM

Same ^, I'd like a kit. Sent PM

BB_cuda · 12-15-2019, 07:38 AM

Just buy the can on Amazon for $80. You don’t need the kit.

9mmkungfu · 12-17-2019, 08:08 PM

I have one I'm not using if anyone wants it for cheap. I won't be able to pull it out of the box, take pics, and ship it until after 12/29 though.

Darkswarmer · 12-23-2019, 10:43 PM

Quote:

Originally Posted by 9mmkungfu

I have one I'm not using if anyone wants it for cheap. I won't be able to pull it out of the box, take pics, and ship it until after 12/29 though.

I'm interested? What's included and what's your price?

ddinse · 01-12-2020, 12:16 AM

Thanks gang for your info in this thread. Installed my system today which took about an hour. Got the can on amazon for $26 sold by K-Motor Performance. I like the design being clear I can check it at a glance. Its barbs are 3/8". Used 3/8 to 1/2" brass adapters ( pex type)
picked up high temp tubing from advanced auto. I used 2 short lengths of 3/8 and made my runs with the 1/2 inch. I used about 3.5 feet. Used 1" high temp silicon tubing to connect to the pvc and intake. The tubing was a close fit to the outside of the 1/2" line so I slid it over top. This I secured with zip ties. I did not use any elbows and I have a loop on the inlet side. Not sure how this will hold up but I will try to update if there are issues.

ddinse · 01-16-2020, 12:16 AM

After 4 days (200 miles) I have about 5ml of oil in the can

9mmkungfu · 01-20-2020, 10:09 AM

Quote:

Originally Posted by Darkswarmer

I'm interested? What's included and what's your price?

Saw this message late. PM sent.

ddinse · 02-19-2020, 11:11 PM

Having major smoking issues and a slight rear main oil leak. Pulled the dipstick while the engine was running and was greeted with a small shower of oil. Removed my catch can set up and went back to stock. Repeated dip stick test and no signs of crankcase pressure. A test drive in daylight tomorrow will tell me if the smoking issue is better. My CC was apparently much too small and was taking away the crankcase vacuum.

ddinse · 02-20-2020, 08:53 AM

Smoking 100% better today. Hopefully this was my issue.

wellvrsd · 02-25-2020, 04:59 AM

Quote:

Originally Posted by ddinse

Having major smoking issues and a slight rear main oil leak. Pulled the dipstick while the engine was running and was greeted with a small shower of oil. Removed my catch can set up and went back to stock. Repeated dip stick test and no signs of crankcase pressure. A test drive in daylight tomorrow will tell me if the smoking issue is better. My CC was apparently much too small and was taking away the crankcase vacuum.

Your problem was likely due to your hoses being routed upwards. The inlet to the catch can needs to be downhill all the way to the catch can, or the oil can pool and cause a blockage, which will pressurize your crankcase.

ddinse · 02-25-2020, 09:38 PM

Thanks you're probably right

Dcharger69 · 04-10-2020, 03:32 PM

A little late to the game, but here is my install. Not sure if it will stay here or not. It's pretty easy to maintain at this location. Not well hidden, but I'm ok with that. Partially held in place with friction and keeping it upright with a zip tie with some room to slide it out. Hopefully won't kink or pool. Thanks for all of the positing in this thread as it helped a lot.

austin313 · 08-05-2021, 08:47 PM

Can someone make a updated install with all elbows, quality of lines and links that are valid

This is too much to read through. To pick out all the stuff that worked/didnt work

jinsta · 08-06-2021, 10:07 AM

Quote:

Originally Posted by austin313

Can someone make a updated install with all elbows, quality of lines and links that are valid

This is too much to read through. To pick out all the stuff that worked/didnt work

You get Ccv delete plates for catch-can installs these days

https://*************************/pr.../m57-pcv-plate

Search whitbread ccv on google

fearitself165 · 08-06-2021, 11:49 PM

Quote:

Originally Posted by jinsta

You get Ccv delete plates for catch-can installs these days

https://*************************/pr.../m57-pcv-plate

Search whitbread ccv on google

Perfect time to ask then so one hose would go from the delete plate to the can, where would the other hose go?

jinsta · 08-07-2021, 03:24 AM

Quote:

Originally Posted by fearitself165

Perfect time to ask then so one hose would go from the delete plate to the can, where would the other hose go?

To the air pipework section (turbo to air filter one, has small pipe on it)

POBEP · 11-08-2021, 01:58 AM

I went the hard way on E70 M57:
- Provent 200 permanently mounted at the rear of intake side
- custom built aluminum vent plate
- 25mm Patrick Motorsport CCV piping to/from Provent
- 1/2 drain pipe to (future) canister near fuel filter
- verified vacuum levels at engine different load scenarios

Report
- setup was expensive and time consuming
- it works excellent
- no piping sipping, no seal leaking
- installation not visible (helps pass smog)
- 1.2L of oil collected over 10,000mi (matches add-up oil quantity)

Red arrows shows routing of uninstalled (at the time of taking photo) piping

04-15-2019, 04:31 PM	#265
Gallo24 Registered 0 Rep 3 Posts Drives: 'Busa Join Date: Jun 2017 Location: Idaho iTrader: (0)	PM'd for kit
	Appreciate 0 Quote

07-20-2019, 03:54 PM	#266
BMMal Registered 0 Rep 1 Posts Drives: 335D Join Date: Jul 2019 Location: Madison, WI iTrader: (0)	Are you still selling these kits? I'd like to buy one.
	Appreciate 0 Quote

12-13-2019, 02:03 PM	#267
Darkswarmer Enlisted Member 4 Rep 31 Posts Drives: 2011 335d Join Date: Nov 2018 Location: Salt Lake City iTrader: (0)	Same ^, I'd like a kit. Sent PM
	Appreciate 0 Quote

12-15-2019, 07:38 AM	#268
BB_cuda Brigadier General 762 Rep 3,555 Posts Drives: 2011 335D Msport, 2013 X5D Join Date: Nov 2011 Location: Clear Lake, Texas iTrader: (0)	Just buy the can on Amazon for $80. You don’t need the kit.
	Appreciate 0 Quote

12-17-2019, 08:08 PM	#269
9mmkungfu Captain 198 Rep 844 Posts Drives: 335d, 535d, 750i, X5 35d Join Date: Sep 2014 Location: United States iTrader: (1)	I have one I'm not using if anyone wants it for cheap. I won't be able to pull it out of the box, take pics, and ship it until after 12/29 though.
	Appreciate 0 Quote

01-12-2020, 12:16 AM	#271
ddinse Private 5 Rep 62 Posts Drives: bmw 328d x drive Join Date: Jan 2019 Location: PA iTrader: (0)	Thanks gang for your info in this thread. Installed my system today which took about an hour. Got the can on amazon for $26 sold by K-Motor Performance. I like the design being clear I can check it at a glance. Its barbs are 3/8". Used 3/8 to 1/2" brass adapters ( pex type) picked up high temp tubing from advanced auto. I used 2 short lengths of 3/8 and made my runs with the 1/2 inch. I used about 3.5 feet. Used 1" high temp silicon tubing to connect to the pvc and intake. The tubing was a close fit to the outside of the 1/2" line so I slid it over top. This I secured with zip ties. I did not use any elbows and I have a loop on the inlet side. Not sure how this will hold up but I will try to update if there are issues. Attached Images
	Appreciate 0 Quote

01-16-2020, 12:16 AM	#272
ddinse Private 5 Rep 62 Posts Drives: bmw 328d x drive Join Date: Jan 2019 Location: PA iTrader: (0)	After 4 days (200 miles) I have about 5ml of oil in the can Attached Images
	Appreciate 0 Quote

02-19-2020, 11:11 PM	#274
ddinse Private 5 Rep 62 Posts Drives: bmw 328d x drive Join Date: Jan 2019 Location: PA iTrader: (0)	Having major smoking issues and a slight rear main oil leak. Pulled the dipstick while the engine was running and was greeted with a small shower of oil. Removed my catch can set up and went back to stock. Repeated dip stick test and no signs of crankcase pressure. A test drive in daylight tomorrow will tell me if the smoking issue is better. My CC was apparently much too small and was taking away the crankcase vacuum. Attached Images
	Appreciate 0 Quote

02-20-2020, 08:53 AM	#275
ddinse Private 5 Rep 62 Posts Drives: bmw 328d x drive Join Date: Jan 2019 Location: PA iTrader: (0)	Smoking 100% better today. Hopefully this was my issue.
	Appreciate 0 Quote

02-25-2020, 09:38 PM	#277
ddinse Private 5 Rep 62 Posts Drives: bmw 328d x drive Join Date: Jan 2019 Location: PA iTrader: (0)	Thanks you're probably right
	Appreciate 0 Quote

04-10-2020, 03:32 PM	#278
Dcharger69 Registered 0 Rep 1 Posts Drives: BMW 335d Join Date: Jan 2020 Location: Rapid city, SD iTrader: (0)	My 335d catch can install A little late to the game, but here is my install. Not sure if it will stay here or not. It's pretty easy to maintain at this location. Not well hidden, but I'm ok with that. Partially held in place with friction and keeping it upright with a zip tie with some room to slide it out. Hopefully won't kink or pool. Thanks for all of the positing in this thread as it helped a lot. Attached Images
	Appreciate 0 Quote

08-05-2021, 08:47 PM	#279
austin313 Enlisted Member 3 Rep 44 Posts Drives: 2013 335i xdrive jet black Join Date: Mar 2016 Location: detroit iTrader: (0)	Can someone make a updated install with all elbows, quality of lines and links that are valid This is too much to read through. To pick out all the stuff that worked/didnt work
	Appreciate 0 Quote

11-08-2021, 01:58 AM	#283
POBEP Lieutenant 361 Rep 552 Posts Drives: E70 E90 E91 Join Date: Mar 2016 Location: Christmas Valley, CA iTrader: (0) Garage List 2011 E90 335d [9.33] 2013 E70 xDrive35d [5.00] 2009 E91 328i [10.00] 2016 F25 xDrive28d [0.00]	I went the hard way on E70 M57: - Provent 200 permanently mounted at the rear of intake side - custom built aluminum vent plate - 25mm Patrick Motorsport CCV piping to/from Provent - 1/2 drain pipe to (future) canister near fuel filter - verified vacuum levels at engine different load scenarios Report - setup was expensive and time consuming - it works excellent - no piping sipping, no seal leaking - installation not visible (helps pass smog) - 1.2L of oil collected over 10,000mi (matches add-up oil quantity) Red arrows shows routing of uninstalled (at the time of taking photo) piping Attached Images
	Appreciate 0 Quote