|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Electrical connectors part numbers
|
|
12-30-2019, 02:27 AM | #1 |
Private
8
Rep 86
Posts |
Electrical connectors part numbers
How would I know a part number for a certain electrical connector, or pin, if I'm doing some electrical work in the car?
At the moment I'm trying to retrofit headlight washing system. I know, I know - clean car etc., but in winter it's actually usefull, plus it's a legal requirement here. Anyway, I know there is/was (it has status "out of production") an OEM retrofit kit, but I went my way, and I just bought everything separately - nozzles, lines, container, pump and wires. The new container came with a used pump and a plug with cut wires, so I was able to solder new ones to that, but I'm stuck on the other end. One of the wires goes to a ground, that's simple, but the other needs to go into one of the plugs in the junction box. But in order to do that, I need a specific pin that will fit that plug, and that's my question - how do I know what kind of pin is it? Any one of these, under the section "SINGLE COMPONENTS WIRING HARNESS REPAIR"? https://www.realoem.com/bmw/enUS/par...MW-335is&mg=61 Is there any way to correlate that with TIS? https://www.newtis.info/tisv2/a/en/e...tlputs/upOxh9C https://www.newtis.info/tisv2/a/en/e...s-cou/CTKms4PT |
Bookmarks |
Thread Tools | Search this Thread |
|
|