|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Questions about passing emission
|
|
07-10-2012, 12:00 PM | #1 |
Captain
68
Rep 743
Posts
Drives: FBO 335i
Join Date: May 2010
Location: Bellevue, Washington
|
Questions about passing emission
I'm currently running catless downpipes/exhaust and have Procede and BMS DP Fix, I don't think the harness for the Procede has been modified yet, I got it from someone else and it was Rev 2 V4 back then. I don't have a BT tool and from what I understand, you have to read the codes before adjusting the DP fix. Is this step absolutely crucial, will I not pass if I throw the wrong code? Should I leave the Procede in and try to install the DP fix on the harness? If I do, do I just leave it on map 0?
__________________
Last edited by Chicks-Love-Bimmers; 07-10-2012 at 12:07 PM.. |
07-12-2012, 08:17 AM | #2 |
Black on Black on Black.
38
Rep 532
Posts |
Turn off CANClear on procede, run your car for a day, have autozone or similar read your OBD-II readiness monitors. Do yourself a favor and grab an inexpensive OBD-II scanner.
If the BMS DP-Fix doesn't work, using the procede to intercept worked well for me with a similar setup at 50% o2 modification. |
Appreciate
0
|
Bookmarks |
|
|