[Kilser]

I was trying to follow along this tutorial
https://www.google.com/search?q=e90+...hrome&ie=UTF-8
and I noticed I dont even have the CIC module. Any guesses where and what value I need to change?

All I am trying to do is enable the option so I am able to have no DRL in Canada.

[erickarlborg]

Originally Posted by Kilser

I was trying to follow along this tutorial
https://www.google.com/search?q=e90+...hrome&ie=UTF-8
and I noticed I dont even have the CIC module. Any guesses where and what value I need to change?

All I am trying to do is enable the option so I am able to have no DRL in Canada.

Do you have FRM1 or 2? Different DRL codings for those

[Kilser]

How would I check for that? Also I know in some other models in the US there is a option to disable them right off the I drive system. That option is obviously taken out entirely. Wondering if there is a way to enable that option possibly without disabling the lights one by one?

[erickarlborg]

Originally Posted by Kilser

How would I check for that? Also I know in some other models in the US there is a option to disable them right off the I drive system. That option is obviously taken out entirely. Wondering if there is a way to enable that option possibly without disabling the lights one by one?

In NCS you will either have FRM (FRM1) or NFRM (FRM2).

For FRM1 the options are: DRL_V_GEDIMMT and DRL_WERT_DIMMUNG (26 or 40% dimming)
For FRM2 the options are: VERHALTEN_DRL_TFL and everything else containing DRL basically

For the iDrive option it should be either CIC or CCC I think, and the option probably DAY_DRIVING_LIGHT

[mweisdorfer]

Originally Posted by Kilser

I was trying to follow along this tutorial
https://www.google.com/search?q=e90+...e&ie=UTF-8
and I noticed I dont even have the CIC module. Any guesses where and what value I need to change?

All I am trying to do is enable the option so I am able to have no DRL in Canada.

Any car made pre 03/07 had an FRM 1. So, using angel eyes as your DRL is not an option. You need to buy a used FRM 2 on eBay for around $100.00 and then follow the various DIY's on this forum on how to use WinKFP & NCS Expert in how to code it.

The first step is to make your VO say your car is an 03/07 through NCS Expert, after you have installed an FRM 2 module.