|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Coding for Bluetooth anywhere near Tampa to Ft. Myers FL?
|
|
06-22-2018, 08:27 AM | #1 |
Private
14
Rep 71
Posts |
Coding for Bluetooth anywhere near Tampa to Ft. Myers FL?
On my 2008 328i sedan I just bought there is the stock Harman Becker Bluetooth Handsfree Carkit MULF2-HI unit in the trunk and a BMW Professional Radio in the car but when I press the Menu button the Telephone option does not show up as a choice.
I checked the Fuses, disconnected the cables from the MULF2 for an hour and still no luck. I disconnected the battery for an hour, no fix. I even replaced the MULF2 with another one from eBay and still no luck. Could it be that it just needs to be coded? The radio, Aux and USB all work fine. Anybody have any info on a place that could do coding to fix my Bluetooth for reasonable? I'm in Sarasota so anywhere from Tampa to Ft. Myers would work for me.
__________________
2008 328i with Sport Package, 6 speed
2007 Porsche Cayman 5 speed |
07-18-2018, 07:16 AM | #2 | |
Private
14
Rep 71
Posts |
Quote:
From what I read all I have to do after installing the mic and antenna is use NCS to select E89 for the Chassis then add $644 in VO to CAS and NFRM. Then run SG_CODIEREN to the module 2URAD to reset the radio output to match with the car setting.
__________________
2008 328i with Sport Package, 6 speed
2007 Porsche Cayman 5 speed |
|
Appreciate
0
|
07-18-2018, 01:57 PM | #3 |
Lieutenant General
1911
Rep 13,101
Posts |
Better to take your coding questions to the coding sub forum.
You also may need an ICOM cable to code things on the Most Bus. http://www.e90post.com/forums/forumdisplay.php?f=368 |
Appreciate
0
|
07-18-2018, 02:02 PM | #4 | |
Private
14
Rep 71
Posts |
Quote:
__________________
2008 328i with Sport Package, 6 speed
2007 Porsche Cayman 5 speed |
|
Appreciate
0
|
Bookmarks |
|
|