Need help with autodim/homelink wiring

MysticblueX3 · 10-27-2012, 01:41 PM

Need help with the wiring for homelink mirror w/ auto dim. I got a used homelink mirror w/ auto dim to replace mine w/o autodim. The mirror just have a bunch of wires coming out of it. It didn't come with the mirror arm or plug so I have to reuse the arm and connector from my mirror. The problem is I don't know which wires to plug into which slot in the connector. I seached but was only able to find the wiring for the retrofit harness. I wasn't able to find the wiring on the mirror end itself. Help!

Thanks.

MysticblueX3 · 10-27-2012, 01:50 PM

Just to clarify. Its the female connector inside the mirror arm. I need to know what color wires (from the mirror) goes into which pin hole in that female connector. Thanks!

LeMansBMW335i · 11-01-2012, 08:13 PM

OK, I hope I can help you out. I happen to have my mirror out of my car now (putting a shift light and low meth level light where the alarm light is!). Here's the pin outs:
1. Grey
2. No pin
3. Red
4. White
5. Black
6. Yellow
7. Green
8. Orange
9. Purple
10. Brown

MysticblueX3 · 11-04-2012, 01:44 PM

Thanks LeMans. It helps alot. Instead of a yellow wire, I have a black/white wire. Since nothing is plugged into pin6 on the harness side. I figure it doesn't really matter. Thanks again!

10-27-2012, 01:41 PM	#1
MysticblueX3 Second Lieutenant 36 Rep 245 Posts Drives: 135i Join Date: Aug 2012 Location: Seattle, WA iTrader: (0)	Need help with autodim/homelink wiring Need help with the wiring for homelink mirror w/ auto dim. I got a used homelink mirror w/ auto dim to replace mine w/o autodim. The mirror just have a bunch of wires coming out of it. It didn't come with the mirror arm or plug so I have to reuse the arm and connector from my mirror. The problem is I don't know which wires to plug into which slot in the connector. I seached but was only able to find the wiring for the retrofit harness. I wasn't able to find the wiring on the mirror end itself. Help! Thanks.
	Appreciate 0 Tweet Quote

10-27-2012, 01:50 PM	#2
MysticblueX3 Second Lieutenant 36 Rep 245 Posts Drives: 135i Join Date: Aug 2012 Location: Seattle, WA iTrader: (0)	Just to clarify. Its the female connector inside the mirror arm. I need to know what color wires (from the mirror) goes into which pin hole in that female connector. Thanks!
	Appreciate 0 Quote

11-01-2012, 08:13 PM	#3
LeMansBMW335i Based on a true story 16 Rep 92 Posts Drives: 2009 335i Join Date: May 2012 Location: Charlotte, NC iTrader: (7)	OK, I hope I can help you out. I happen to have my mirror out of my car now (putting a shift light and low meth level light where the alarm light is!). Here's the pin outs: 1. Grey 2. No pin 3. Red 4. White 5. Black 6. Yellow 7. Green 8. Orange 9. Purple 10. Brown Attached Images __________________ 2009 335i M-Sport: BMW Performance SSK/pedals/ spoiler/suspension/rear diffuser, 650i clutch, 35% tint, JB4, AFE DCI, Meth Injection, Ceramic coated VRSF Downpipes, ER Chargepipe, DTEC Angle Eyes, LED Interior and Reverse Lighting, Shift Light & Low Meth Light inside Rear View Mirror Clown Nose
	Appreciate 0 Quote

11-04-2012, 01:44 PM	#4
MysticblueX3 Second Lieutenant 36 Rep 245 Posts Drives: 135i Join Date: Aug 2012 Location: Seattle, WA iTrader: (0)	Thanks LeMans. It helps alot. Instead of a yellow wire, I have a black/white wire. Since nothing is plugged into pin6 on the harness side. I figure it doesn't really matter. Thanks again!
	Appreciate 0 Quote