|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Hid fogs?
|
|
01-14-2008, 11:21 PM | #3 |
Brigadier General
1469
Rep 3,552
Posts |
i got them working, but it was a pain.
you have two issues to deal with. one is the bulb out indicator, second is flickering when the LCM does a bulb test. basically had to wire in two 50W resistors into the sockets, then use one side to trigger a relay that turns on the fogs. i ran a 15W fused lead down from the battery terminal under the hood to the drivers side foglamp. used a standard auto relay looped into the existing circuit for the fogs to control both sides. attached 50W resistors with extra heatsinks onto each side of the car's foglamp circuit. i've heard there's a kit coming out that wont require this much work. its doable, but a pain without it
__________________
Present: 2023 G07 40i ZDH/ZDU/ZMP/ZMQ/2NH/ZPK/ZPP/ZRC/300/3AC
Past: 2013 335i 6MT ZMM/ZDH/ZTP/3AG/494/508 Past: 2016 F34 335i xDrive ZCW/ZDA/ZDH/ZTP/ZMP/2V5/5DL Past: 2019 G01 M40i ZDA/2VF/ZPP/ZPX/688/3AC |
Appreciate
0
|
Bookmarks |
|
|