E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > BMW CODING success



Reply
 
Thread Tools Search this Thread
      01-22-2018, 01:32 PM   #5281
jdandcoke
New Member
United Kingdom
0
Rep
6
Posts

Drives: 2009 E91
Join Date: Jan 2016
Location: deepest darkest essex

iTrader: (0)

Quote:
Originally Posted by Joe@TopGearSolutions View Post
My thread has the most up to date BMW Standard Tools.

http://www.e90post.com/forums/showthread.php?t=1204192
hi thanks. actually found your thread about 10 min after putting up my post. sods law in action.
spent about 6 hours trying to get it to work with your software and a different version i found
before finding out that my cable is made from the finest chineseium. so ive now ordered a new cable from cableshack
one thing i found missing in your ediabas/hardware/obd folder was obdsetup.exe as i needed to use it to do a regedit.

im thinking of going down the icom route is there any sites you could recommend for a uk purchase.
thanks
Appreciate 0
      03-17-2018, 06:51 PM   #5282
bodek_wr
New Member
0
Rep
19
Posts

Drives: E70
Join Date: Jan 2014
Location: Europe

iTrader: (0)

Hi,

I'm trying to run properly INPA and others. After installing and configuring, when I run INPA and select car and trying to select module I got an error:"Fehler! Gruppendatei: D_MMI.GRP existiert nicht im Verzechnis ../EDIABAS/ECU"

The case is the mentioned file exists in that folder. I'm thinking, why above, I see "../EDIABAS/ECU", when EDIABAS is located ../../../EDIABAS/ECU in relation to INPA/BIN folder.
Do I have something wrong with installation?

best regards

M.
Appreciate 0
      03-26-2018, 04:16 PM   #5283
Jimmy911
Registered
0
Rep
1
Posts

Drives: BMW m3 e46
Join Date: Mar 2018
Location: Zimbabwe

iTrader: (0)

jimmy911

Hey great video. I'd appreciate your help. I'm going to try programming soon, if I get stuck
Appreciate 0
      03-29-2018, 02:43 PM   #5284
Kuj0n
Enlisted Member
Poland
11
Rep
45
Posts

Drives: F31 LCI 320xdA B47
Join Date: Mar 2018
Location: Poland

iTrader: (0)

Hi
Is it possible to update modules (except MOST) e91 320d from 2006 with cable "USB BMW GT1?" - inpa ncs etc works OK.
I think that my car has no dcan so if i have k-line only cable it will be fine ?
I have Spdaten 60.1, and ofc good additional power supply.



EDIT.
question is out of date

Last edited by Kuj0n; 04-01-2018 at 12:23 PM..
Appreciate 0
      04-21-2018, 02:13 PM   #5285
Dr.Rockso
Enlisted Member
8
Rep
33
Posts

Drives: 2007 335i, 2011 335d
Join Date: Apr 2018
Location: a whales vagina

iTrader: (0)

Is there a thread for entry into coding and flashes? I've coded a bunch with subaru and american cars, but I am not familiar with the software/ hardware involved with BMW's.
Appreciate 0
      07-17-2018, 01:35 PM   #5286
xanman72
New Member
0
Rep
7
Posts

Drives: 2008 328i
Join Date: Jun 2018
Location: California

iTrader: (0)

I recently got a yellow "brake" light and then looked at my OBDII port and no errors/warnings came up, is this common?
Appreciate 0
      07-28-2018, 08:28 AM   #5287
shandormeyer
Registered
0
Rep
1
Posts

Drives: m325i e91 touring 2006 model
Join Date: Jul 2018
Location: vredenburg

iTrader: (0)

help with my m325i

hi there.i have m325i.the battery was replaced now they say must be rocoded.but it starts the cars.is there easer way to code it please thank u
Appreciate 0
      09-05-2018, 09:03 AM   #5288
Faruk
New Member
Faruk's Avatar
30
Rep
17
Posts

Drives: 320si
Join Date: Feb 2016
Location: Türkiye

iTrader: (0)

Garage List
  [0.00]
I just bought k+Dcan cable with switch on it. It came with Inpa v5.02 and v5.06 on disc. I just installed v5.06 cable connects see battery and ecu but i cant get the program working. It doesnt show any of models. F3-4-5-6.. buttons showing blank.

How can i get latest working software for my e90?
Appreciate 0
      10-12-2018, 12:27 AM   #5289
PNW_E9One
New Member
United_States
0
Rep
5
Posts

Drives: 2006 325xit
Join Date: Oct 2018
Location: Oregon

iTrader: (0)

Is there a MAC version of this?
Appreciate 0
      01-19-2019, 08:29 PM   #5290
SAMI1820
Private
SAMI1820's Avatar
United_States
41
Rep
74
Posts

Drives: 2023 BMW X5 M50i
Join Date: Dec 2009
Location: HOUSTON, TX

iTrader: (0)

Garage List
Hello everyone I just bought K+Dcan cable and it say it is compatible with INPA unfortunately the disc they sent with its broken in half so now I am looking for a way to download program that will with this cable can anyone can direct me right direction I really appreciated.
__________________
X5 M50I
Appreciate 0
      01-20-2019, 10:49 AM   #5291
frobeau_e92
Registered
frobeau_e92's Avatar
0
Rep
2
Posts

Drives: Spacegray e92 335i
Join Date: Jan 2019
Location: Louisiana

iTrader: (0)

https://gyazo.com/82a79082371175d18861576f937f9bc8

This is all that pops-up when I load INPA and I can't figure out how to get the rest of it to work. I'm on windows 10.
Appreciate 0
      01-24-2019, 04:35 AM   #5292
waelaburezeq
Private
Germany
2
Rep
50
Posts

Drives: 2.0 ltr 2007 E90
Join Date: May 2016
Location: Cologne

iTrader: (0)

Quote:
Originally Posted by ganastas View Post
I too can code e90's and others. All the info is on another website. I turned off the gongs coded the OEM alarm to my car. Folding mirrors with the remote shut off the buld errors and led buld test on start up, you know the disco light show of you have LED's installed of stuff you can do. But be forewarned you can brick modules. So be careful and go slowly. You need about 100 bucks in startup money and a laptop. The best is when you can use the BMW DIS program for diagnostics and trouble shoot your own car.
what software and cable do you suggest?
Appreciate 0
      01-24-2019, 04:38 AM   #5293
waelaburezeq
Private
Germany
2
Rep
50
Posts

Drives: 2.0 ltr 2007 E90
Join Date: May 2016
Location: Cologne

iTrader: (0)

BMW Software & Cable

Quote:
Originally Posted by ganastas View Post
I too can code e90's and others. All the info is on another website. I turned off the gongs coded the OEM alarm to my car. Folding mirrors with the remote shut off the buld errors and led buld test on start up, you know the disco light show of you have LED's installed of stuff you can do. But be forewarned you can brick modules. So be careful and go slowly. You need about 100 bucks in startup money and a laptop. The best is when you can use the BMW DIS program for diagnostics and trouble shoot your own car.
what software and cable do you suggest?
Appreciate 0
      01-24-2019, 05:01 AM   #5294
todor
New Member
0
Rep
11
Posts

Drives: E46 M3
Join Date: Jul 2014
Location: Seattle, WA & Bulgaria

iTrader: (0)

Quote:
Originally Posted by waelaburezeq View Post
what software and cable do you suggest?
By far the easiest-to-use one is Carista. It's a mobile app and works with generic cheap ELM327 OBD dongles. But it only does coding on CAN-based cars, i.e. mid-2007 and newer E-models.

Other than that, if you're feeling adventurous, you can try NCS Expert on a 32-bit version of Windows, which can do it on any E-chassis car with the correct cable (and effectively, that's what this thread is about).
Appreciate 0
      02-12-2019, 12:54 AM   #5295
waelaburezeq
Private
Germany
2
Rep
50
Posts

Drives: 2.0 ltr 2007 E90
Join Date: May 2016
Location: Cologne

iTrader: (0)

Quote:
Originally Posted by xxxjecxxx View Post
Update 9/14/14

Thank you Chewy for hosting the files

Download Files

http://www.dehmicro.com/bmw

Tutorial
1) Install BMW standard tools
2) Replace folders with v49
3) Install cable drivers


======================================

I can officially code BMWs, specifically E90s. check it out


Video- close all windows and sunroof with FOB


pictures - corner delete mod, digital speed on cluster



TUTORIAL
Note: all files needed are in ncsexpert.rar and DIY is a pdf as a separate file! Enjoy!

Order this cable Updated! U
http://www.one-stop-electronics.com/...&product_id=16



Program files (see link above)


DIY in PDF format

Coding examples (for 5 series)
http://forums.5series.net/topic/1060...g/page__st__15

This will be your best friend at all times, especially in the bad times
http://translate.google.com/#de|en|

I have created a video for those who are having troubles or have no idea



What can I code? What values do I have to change?
Here is a spreadsheet that Neutrino45 is administering
You have to request access to it, please do not delete anything in it.
https://spreadsheets.google.com/ccc?...CPqY7sEC#gid=0



There is A TON of information in this thread. I have tried my best to make it easy to understand if you still have questions please first

Thank you to all the members who have contributed to this thread.


Junior
hi mate,

I would start with the last link you shared for the spreadsheet codes. I purchased the cable and installed the software for BMW Coding Tool. I am interested in Folding mirror feature. However, I am not able to code it because:

In the spreadsheet, it was listed under Module "FRM (NFRM)" I didn't find this in my code list, instead I found FRM.C09 , FRM2.C09 and so on. Am I missing anything? Because even the function value "SPIEGEL_KOMFORT_EINKLAPP or ASP_KOMFORT_EINKLAPP" was not there when I searched for it.
Appreciate 0
      02-19-2019, 03:10 PM   #5296
DimitrisM3
e90 my big fat lady!
DimitrisM3's Avatar
Greece
49
Rep
290
Posts

Drives: e90
Join Date: Oct 2011
Location: Greece Naoussa

iTrader: (0)

Hello guys I need small help with coding performance seats what need to code to work properly!
Appreciate 0
      02-20-2019, 09:45 PM   #5297
rmguna
Registered
0
Rep
3
Posts

Drives: BMW 328i
Join Date: Feb 2019
Location: Louisville, KY

iTrader: (0)

RDC Module Reset Error

I got everything setup and communicating with my 2011 328i. After replacing the RDC module trying to reset it. Below is what I am using and what I am getting. Any help or tips is much appreciated.
Using NCS-Expertentool V4.0.1, CoAPI: V3.13.2, KrAPI: 3.0.2, Ediabas: V7.3.0
Cable I got: BMW K+DCAN OBD2 Cable Switch FTDI FT232RL Tools INPA EDIABAS NCS EXPERT ISTA
https://www.ebay.com/itm/BMW-K-DCAN-...72.m2749.l2649

Error:
[13:55:35.717] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[13:55:35.717] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP

[13:55:35.842] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[13:55:35.842] [2019-02-18] [SERIE] SG antwortet nicht CODIERINDEX_LESEN

[13:55:38.546] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[13:55:38.546] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP

[13:55:38.664] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[13:55:38.664] [2019-02-18] [SERIE] SG antwortet nicht CODIERDATEN_LESEN
Attached Images
 
Appreciate 0
      03-25-2019, 01:41 AM   #5298
RipplesE90
New Member
0
Rep
7
Posts

Drives: BMW 320i e90
Join Date: Mar 2019
Location: New Zealand

iTrader: (0)

Hi guys, long time lurker first time poster. Does anyone know what module the Reverse-Gong (for Japan) would be in? I’m trying to code this off my car but can’t find it anywhere!
Appreciate 0
      03-29-2019, 04:27 PM   #5299
mgorman87
Private
31
Rep
80
Posts

Drives: 2011 BMW 328i
Join Date: Mar 2019
Location: Grand Rapids, MI

iTrader: (0)

Quote:
Originally Posted by n00b17 View Post
So I have a 2011 E90 with xenon lamps and AEs
I wanted to increase the AE brightness, and I read/was told that I would have to code via nettodat to achieve that.

I got the nettodat.trc for my NFRM module using the NCS-Expert. Then in NCS Dummy the hex values for PWM_SL_1_FKT_BL_TFL & PWM_SL_1_FKT_SL_TFL were set to custom value 0C,2C and create the nettodat.man file (A compare shows the change correctly)

Then back to NCS-Expert, coapiCodeSgByNettoData as the basic function (supplying nettodat.man as the value for the Nettodatenliste parameter)
The jobname was kept as SG_CODIEREN while executing the job, which completed successfully.

However, when I read back the NFRM module to confirm the changes, the nettodat.trc file shows the old values.

What could I be doing wrong ??
I've used different NCS Expert profiles and the result is the same.
Make sure you don't do "Process Job" after you code by NETTODAT. I was trying this yesterday and executing the job reverts the changes
Appreciate 0
      03-29-2019, 07:30 PM   #5300
SAMI1820
Private
SAMI1820's Avatar
United_States
41
Rep
74
Posts

Drives: 2023 BMW X5 M50i
Join Date: Dec 2009
Location: HOUSTON, TX

iTrader: (0)

Garage List
Does Bimmer code works on E90 2006?
__________________
X5 M50I
Appreciate 0
      04-12-2019, 01:11 PM   #5301
JonEQuest
Captain
JonEQuest's Avatar
245
Rep
612
Posts

Drives: 2008 335i Convertible 2007 335
Join Date: Jul 2018
Location: USA

iTrader: (0)

I have searched and cannot find what I need. I have INPA and the main menu is in English but when I get deeper in to test DSC, bleed brakes, steering angle, etc. everything is in German which makes it really hard to keep up. I had to manually bleed my brakes after doing a DSC motor swap because I couldn't translate fast enough and errors came up, then went away, etc. I have 2008 E93 so if there is another version that doesn't work with newer cars but has more English that is fine by me.
Appreciate 0
      04-29-2019, 11:17 AM   #5302
Black e92 Sport
New Member
4
Rep
7
Posts

Drives: 2009 328i copue
Join Date: Apr 2019
Location: Santa Clarita, CA

iTrader: (0)

CABD Error

Hey bud. I'm new to this so pls be patient...
Just got youra Bimmergeeks cable and it seems to be working fine. I have been on countless blogs and have gone over FAQ's to make sure I am doing everything right. I keep getting "error in CABD!" when I try to read or write files on my '09 E92. I have spent days going over everything to make sure I am not screwing this up - Here's some background:

Win 10 laptop - com port 1, latency 1 on usb connection
NCS Expert connects but the ingition circle on INPA is not filled in, only the cable
NCS profile on Expert (manipulation unchecked)

Here isthe error log:
[23:31:55.689] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371
[23:31:55.689] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED

[23:31:55.798] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6
[23:31:55.798] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN

================================================== ==============================
[23:34:08.107] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS TestCod 365
[23:34:08.107] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_SCHREIBEN: ERROR_ECU_UPLOAD_NOT_ACCEPTED

[23:34:08.220] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6
[23:34:08.220] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) TEST_CODIERUNG

================================================== ==============================
[23:35:28.342] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371
[23:35:28.342] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED

[23:35:28.454] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6
[23:35:28.454] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN_OHNE_FG_AEI

================================================== ==============================

Many thanks in advance...
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:31 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST