|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Having an issue with my jb4/ code p0276
|
|
04-16-2015, 05:12 PM | #1 |
Private
2
Rep 60
Posts |
Having an issue with my jb4/ code p0276
To start off, I have a 2011 335xi sedan. I installed my jb4 2 weeks ago, no issues, everything was running fine. Today I went to install the flex fuel sensor; got it all hooked up into the harness, one pin into hole #21, crimped a dsub connector on the bare wire part and hooked it into hole #4 per Jon at BMS. I was having trouble getting that back engine cover off to get to the mass fuel sensor, so I left the connectors in the ECU box, put everything back together, fired it up and immediately threw a code and the jb4 wont work at all. Borrowed my friends obdII reader and it came back p0237. I did a quick search and it seems that code is related to the charge piping/tmap sensor which I checked, and everything is connected properly.
I'm thinking that it could be related to the fact that the FF sensor is hooked into the harness, but not connected to anything? Any insight? Thanks. Edit: not sure why I put p0276 in title...definitely p0237 Last edited by Crimedog04; 04-16-2015 at 05:17 PM.. |
Bookmarks |
|
|