What did you do to your car today?

Kong Sheng Han · 06-28-2015, 02:08 AM

Received and installed my BMS clutch stop. Holy shit, what a difference. I can drive the car now lol.

stashtrey · 06-28-2015, 02:19 AM

Quote:

Originally Posted by GB-335xiCoupe

Wow.

Right!? Wasn't sure the worm gear was even the culprit so when I tore the motor off I was relieved to see the thing all torn up. If it had been all nice looking I'd have had bigger problems to deal with.

Totally worth it!

BeastMode335i · 06-29-2015, 06:15 AM

Quote:

Originally Posted by WRichieX

The "psshhhh" sound is actually a lot nicer on this than the wrx. The boxer had like this high pitch whistle. When I say annoyed I just don't want to hear it every time I let off the throttle.

Oh that's tight, thanks for the feedback.. I been on the fence between this one and the synapse one..

Teufel_Hunden · 06-29-2015, 08:41 AM

BMS intake.

Ruben6 · 06-29-2015, 11:24 AM

Plastidipped my wheels and kidney grill and painted the calipers. Not much but it makes a big difference on the appearance of the car.

Ruben6 · 06-29-2015, 11:33 AM

wheels

WRichieX · 06-29-2015, 11:56 AM

Quote:

Originally Posted by BeastMode335i

Oh that's tight, thanks for the feedback.. I been on the fence between this one and the synapse one..

I hear the synapse is real loud but apparently there are a lot of issues with this. I think all the vendors on here actually stopped selling them due to all the issues.

I originally wanted the synapse as well.

BeastMode335i · 06-29-2015, 01:31 PM

Quote:

Originally Posted by WRichieX

I hear the synapse is real loud but apparently there are a lot of issues with this. I think all the vendors on here actually stopped selling them due to all the issues.

I originally wanted the synapse as well.

Issues with the Synapse??!?

WRichieX · 06-29-2015, 01:35 PM

Quote:

Originally Posted by BeastMode335i

Issues with the Synapse??!?

I don't know the exact details but apparently it fails and the synapse warranty/customer service sucks. There was a few threads on here talking about that.

BeastMode335i · 06-29-2015, 02:11 PM

Quote:

Originally Posted by WRichieX

I don't know the exact details but apparently it fails and the synapse warranty/customer service sucks. There was a few threads on here talking about that.

Wow that sucks..! I read that Tial's are nice but there a lot of knockoffs.. It's such a simple device it's hard to imagine how it could fail under a light load but then again, if it's made cheaply I suppose anything could fail..

GB-335xiCoupe · 06-29-2015, 02:49 PM

Had the R132a recharged today. AC was suckingass. Now running COLD.

Cost me $91 after taxes. Might try doing this myself next time, but have to buy a $65 manifold gauge set, and $120+ vacuum pump. After two-three charges, pays for itself...

dghits26 · 06-29-2015, 05:38 PM

Quote:

Originally Posted by onlyabloke

Agreed. When I go back to CA I'll be rocking it too.

Anyways.

I tinted mine today.

How much for you wheels ?
lol

stashtrey · 06-29-2015, 06:22 PM

Quote:

Originally Posted by GB-335xiCoupe

Had the R132a recharged today. AC was suckingass. Now running COLD.

Cost me $91 after taxes. Might try doing this myself next time, but have to buy a $65 manifold gauge set, and $120+ vacuum pump. After two-three charges, pays for itself...

I got a manifold kit from Harbor Freight for less than 65 if I recall. Definitely worth it as I've helped a few friends with their ac. Pretty easy once you have all the stuff. Nothing like a freshly charged ac on a hot day! 105+ here in Sacramento this week...grateful for my kit!

Volrath · 06-29-2015, 07:15 PM

Quote:

Originally Posted by dghits26

How much for you wheels ?
lol

Probably guessing ~$2,600+ no tps.

GB-335xiCoupe · 06-30-2015, 12:53 AM

Quote:

Originally Posted by stashtrey

I got a manifold kit from Harbor Freight for less than 65 if I recall. Definitely worth it as I've helped a few friends with their ac. Pretty easy once you have all the stuff. Nothing like a freshly charged ac on a hot day! 105+ here in Sacramento this week...grateful for my kit!

Don't you have to vacuum pump the system to ensure no leaks, no moisture, and the proper charge weight? I know high- and low-side pressure readings are important (and the vent temperature obviously is key), but they aren't a definite indication of in-spec refrigerant qty.

Eagle1oh7 · 07-02-2015, 10:15 PM

So starting on Monday I set about installing an oil cooler using OEM parts. Additionally since I'm at 48.7K I changed my oil with Motul 5W40 LL01, cabin microfilter and replaced the spark plugs and changed out the radiator fluid. It was a pain doing the cooler, but I wanted to do it just because it was possible and to see how handy I am. When I turned on the engine it sounded amazing and seems to pull harder with the new plugs(NGK). No leaks from the filter housing/cooler of oil or coolant. Finished just in time to enjoy the 4th with some beers and grilled meats on the beach!

Kevinl · 07-03-2015, 12:22 AM

Had the mufflers deleted

Socket · 07-03-2015, 08:42 AM

plastidipped front bumper recently

Sasky · 07-03-2015, 12:29 PM

Replaced leaking headlight washer pump.

justanotherdude · 07-03-2015, 01:16 PM

Started with a light interior, then did a quick clean up of the outside before I decided it was too hot to do much more than that. >__<

On a side note, I need a paint job STAT.

The Bavarian · 07-04-2015, 08:36 AM

Left her in the hands of my neighbor and good friend while we are on vacation. He is considering a similar purchase and thought I'd give him an extended test drive....

GB-335xiCoupe · 07-04-2015, 09:55 AM

Quote:

Originally Posted by The Bavarian

Left her in the hands of my neighbor and good friend while we are on vacation. He is considering a similar purchase and thought I'd give him an extended test drive....

That's very kind of you.

06-28-2015, 02:08 AM	#2201
Kong Sheng Han Banned 303 Rep 1,140 Posts Drives: Something something racecar Join Date: Feb 2013 Location: Austin, Texas iTrader: (2) Garage List 2011 BMW 328i [0.00] 2001 BMW M3 [0.00]	Received and installed my BMS clutch stop. Holy shit, what a difference. I can drive the car now lol.
	Appreciate 0 Quote

06-29-2015, 08:41 AM	#2204
Teufel_Hunden Banned 8355 Rep 2,963 Posts Drives: 2013 M3 6MT LMB ZCP Join Date: Feb 2012 Location: Maryland iTrader: (3)	BMS intake.
	Appreciate 0 Quote

06-29-2015, 11:24 AM	#2205
Ruben6 New Member 0 Rep 23 Posts Drives: 2011 BMW 328i Join Date: May 2015 Location: Texas iTrader: (0)	Plastidipped my wheels and kidney grill and painted the calipers. Not much but it makes a big difference on the appearance of the car. __________________
	Appreciate 0 Quote

06-29-2015, 11:33 AM	#2206
Ruben6 New Member 0 Rep 23 Posts Drives: 2011 BMW 328i Join Date: May 2015 Location: Texas iTrader: (0)	Plastidip wheels wheels Attached Images __________________
	Appreciate 0 Quote

06-29-2015, 02:49 PM	#2211
GB-335xiCoupe Libertarian 132 Rep 1,577 Posts Drives: 29k mi per year. Join Date: Sep 2013 Location: Green Bay area iTrader: (0)	Had the R132a recharged today. AC was suckingass. Now running COLD. Cost me $91 after taxes. Might try doing this myself next time, but have to buy a $65 manifold gauge set, and $120+ vacuum pump. After two-three charges, pays for itself... __________________ 2011 335xi Coupe BSM (e92/N55/ZPP/ZCW, Alpina B3 Flash) Bought 08/09/2013@53,340mi Current 3/13/2019@206,283mi Fail(s): tstat hous/water pump 89k, Chargepipe 106k, coolant tank 114k, FRM3 114k Maint: Walnut blast 101k, Trans/T-case Fluid 103k, OFHG 195k
	Appreciate 0 Quote

07-02-2015, 10:15 PM	#2216
Eagle1oh7 Lieutenant Colonel 287 Rep 1,710 Posts Drives: '11 328i Sedan Join Date: Oct 2012 Location: Chula Vista CA iTrader: (0)	So starting on Monday I set about installing an oil cooler using OEM parts. Additionally since I'm at 48.7K I changed my oil with Motul 5W40 LL01, cabin microfilter and replaced the spark plugs and changed out the radiator fluid. It was a pain doing the cooler, but I wanted to do it just because it was possible and to see how handy I am. When I turned on the engine it sounded amazing and seems to pull harder with the new plugs(NGK). No leaks from the filter housing/cooler of oil or coolant. Finished just in time to enjoy the 4th with some beers and grilled meats on the beach! __________________ DONE: Seibon CF Hood, M3 Rep, MSport rear w/DD CF Diffuser, M3 Rep Skirts, Seibon CSL trunklid, Forgestar F14 18s w/Michelin PSS, Eisenmann catback, AA Headers, BPC Stage 2, Charcoal Delete+revMotor+AFE Drop In filter FUTURE MODS: LED headlights, CF rooftop, M3 Suspension Conversion, Dinan CAI Mod
	Appreciate 0 Quote

07-03-2015, 12:22 AM	#2217
Kevinl Lieutenant 210 Rep 563 Posts Drives: 2017 BMW M3 Alpine White 6MT Join Date: Aug 2014 Location: Phoenix iTrader: (0)	Had the mufflers deleted __________________ 2017 M3 Alpine White 6MT
	Appreciate 0 Quote

07-03-2015, 08:42 AM	#2218
Socket Lieutenant General 4542 Rep 11,903 Posts Drives: 335i Join Date: Nov 2014 Location: Australia iTrader: (4) Garage List 2008 BMW E92 [0.00]	plastidipped front bumper recently Attached Images
	Appreciate 1 Quote

07-03-2015, 12:29 PM	#2219
Sasky New Member 3 Rep 11 Posts Drives: 2008 335xi coupe 6sp Join Date: May 2014 Location: Saskatoon Saskatchewan iTrader: (0) Garage List 2008 BMW 335xi coupe [0.00]	Replaced leaking headlight washer pump. __________________ E92 335xi coupe, VRSF catless DP
	Appreciate 1 Quote

07-03-2015, 01:16 PM	#2220
justanotherdude Lieutenant 136 Rep 581 Posts Drives: 2010 AW 328 [Sold] Join Date: Sep 2013 Location: Jersey iTrader: (1) Garage List 2010 BMW 328i [0.00]	Started with a light interior, then did a quick clean up of the outside before I decided it was too hot to do much more than that. >__< On a side note, I need a paint job STAT.
	Appreciate 0 Quote

07-04-2015, 08:36 AM	#2221
The Bavarian Private 5 Rep 67 Posts Drives: 2011 335i e90 M-Sport, AT, PPK Join Date: May 2015 Location: Denver, CO iTrader: (0)	Left her in the hands of my neighbor and good friend while we are on vacation. He is considering a similar purchase and thought I'd give him an extended test drive....
	Appreciate 1 Quote