[dleccord]

Has anyone tried the monoball design?


https://www.ecstuning.com/b-turner-m...024572tms03~a/

[Kevin_The_Clean1]

Originally Posted by dleccord

Has anyone tried the monoball design?


https://www.ecstuning.com/b-turner-m...024572tms03~a/

I'm going the full E9X M3 conversion route back there. But I must say that these look excellent...

[Yangorang]

Bump - anyone tried either the upper or lower monoball mounts from Turner and have any feedback regarding NVH?
https://www.ecstuning.com/b-turner-m...024572tms03~a/
https://www.ecstuning.com/b-turner-m...0019tms01~arw/

[hellokitty]

Originally Posted by Yangorang

Bump - anyone tried either the upper or lower monoball mounts from Turner and have any feedback regarding NVH?
https://www.ecstuning.com/b-turner-m...024572tms03~a/
https://www.ecstuning.com/b-turner-m...0019tms01~arw/

I use the AKG upper and lower rear mounts. No NVH.

I also have aluminum subframe bushings. No NVH.

[Yangorang]

Originally Posted by hellokitty

I use the AKG upper and lower rear mounts. No NVH.

I also have aluminum subframe bushings. No NVH.

Are you using the poly lower mount or the spherical bearing one?
AKG rates the spherical bearing ones for track only but I would think them being at the bottom of the shock it shouldn't be as big of a deal as the top mount.

[hellokitty]

Originally Posted by Yangorang

Are you using the poly lower mount or the spherical bearing one?
AKG rates the spherical bearing ones for track only but I would think them being at the bottom of the shock it shouldn't be as big of a deal as the top mount.

AKG poly for rear bottom.

[Yangorang]

Originally Posted by hellokitty

AKG poly for rear bottom.

Have you had to grease your poly mounts to prevent squeaking?

[hellokitty]

Originally Posted by Yangorang

Have you had to grease your poly mounts to prevent squeaking?

No haven't had them installed long enough to hear anything. Only had them for a few thousand miles.

[dleccord]

update for those who are looking into this as an alternative upgrade/replacement in the future. the lower mounts are fine but because they're designed the way they are, expect higher rates of upper shock mount failures. i just went through a set of dinan upper shock mount kit (12mm) for my tc kline shocks.

[Asonchadwick]

Originally Posted by dleccord

update for those who are looking into this as an alternative upgrade/replacement in the future. the lower mounts are fine but because they're designed the way they are, expect higher rates of upper shock mount failures. i just went through a set of dinan upper shock mount kit (12mm) for my tc kline shocks.

I wonder how it's ruining the top mounts. Turner also makes a top mount like the bottom. Maybe you need to run both?