N55 not showing up in INPA

M.a.r.k.u.s · 10-02-2014, 11:20 AM

I haven't played around with INPA all that much until this past week and I've tried just about everything I can think of, searched all sorts of forums but can not seem to figure out why I don't have my engine (N55) as an option in INPA when I click on "engine".

I have the newest Daten files (v53) and INPA version 5.0.1. I'm assuming it is setut wrong somehow. It'll connect to my car just fine and I can do most of the functional tests.

If anyone has any ideas, I'd appreciate it.

Thanks!

wildcatcrazy · 10-02-2014, 11:43 AM

Quote:

Originally Posted by M.a.r.k.u.s

I haven't played around with INPA all that much until this past week and I've tried just about everything I can think of, searched all sorts of forums but can not seem to figure out why I don't have my engine (N55) as an option in INPA when I click on "engine".

I have the newest Daten files (v53) and INPA version 5.0.1. I'm assuming it is setut wrong somehow. It'll connect to my car just fine and I can do most of the functional tests.

If anyone has any ideas, I'd appreciate it.

Thanks!

You should have MSD81 listed... If not, you def have something wrong with your set up.

M.a.r.k.u.s · 10-02-2014, 11:50 AM

Quote:

Originally Posted by wildcatcrazy

You should have MSD81 listed... If not, you def have something wrong with your set up.

I haven't seen that anywhere. It should be listed once I click on E90 -> Engine -> MSD81?

wildcatcrazy · 10-02-2014, 04:41 PM

Quote:

Originally Posted by M.a.r.k.u.s

Quote:

Originally Posted by wildcatcrazy

You should have MSD81 listed... If not, you def have something wrong with your set up.

I haven't seen that anywhere. It should be listed once I click on E90 -> Engine -> MSD81?

Yes.

M.a.r.k.u.s · 10-02-2014, 05:24 PM

Quote:

Originally Posted by wildcatcrazy

Yes.

Yeah that's definitely not in there. Any idea what I need to do in order to fix that?

wildcatcrazy · 10-02-2014, 05:37 PM

What version of INPA do you have?

M.a.r.k.u.s · 10-02-2014, 05:38 PM

Quote:

Originally Posted by wildcatcrazy

What version of INPA do you have?

5.0.1

wildcatcrazy · 10-02-2014, 05:41 PM

Will it read errors if you click on functional jobs?

M.a.r.k.u.s · 10-02-2014, 05:48 PM

Quote:

Originally Posted by wildcatcrazy

Will it read errors if you click on functional jobs?

Yeah that part works. I just read that my version of INPA might not be compatible with the new daten files I have (53.3). Could that be the reason?

wildcatcrazy · 10-02-2014, 06:00 PM

Quote:

Originally Posted by M.a.r.k.u.s

Quote:

Originally Posted by wildcatcrazy

Will it read errors if you click on functional jobs?

Yeah that part works. I just read that my version of INPA might not be compatible with the new daten files I have (53.3). Could that be the reason?

First I've heard of that... I know it works with 51.x.

M.a.r.k.u.s · 10-02-2014, 06:02 PM

Quote:

Originally Posted by wildcatcrazy

First I've heard of that... I know it works with 51.x.

I'll double check everything again and make sure I have the msd81.ipo file in the right folder and see if it works.

M.a.r.k.u.s · 10-03-2014, 03:21 PM

Quote:

Originally Posted by wildcatcrazy

You should have MSD81 listed... If not, you def have something wrong with your set up.

looked through everything and it turns out I don't have the msd81.ipo file and can't find it online anywhere. Any ideas where I can get it?

wildcatcrazy · 10-04-2014, 02:39 AM

Quote:

Originally Posted by M.a.r.k.u.s

Quote:

Originally Posted by wildcatcrazy

You should have MSD81 listed... If not, you def have something wrong with your set up.

looked through everything and it turns out I don't have the msd81.ipo file and can't find it online anywhere. Any ideas where I can get it?

I can transfer it to you.

M.a.r.k.u.s · 10-04-2014, 11:24 AM

Quote:

Originally Posted by wildcatcrazy

I can transfer it to you.

that would be great. I'll pm you my email. Thanks!

fryj00 · 02-04-2015, 09:59 AM

I could use the same help, if anyone is willing to send me that file.

Thanks!

-Bryan

EDIT: Wait, shouldn't that be the msd81.prg file? Also, just to be clear, what path are you guys working with? I'd like to make sure that I'm looking in the right place.

torr · 02-07-2015, 10:40 AM

Depending on your DME version you have have to add one of the following to INPA.

MEVD17KW.IPO
MEVD172.IPO
MEVD176K.IPO

This is what worked for me, I have not tried MSD81 because I thought that was for the N54.

js335in54 · 02-07-2015, 12:07 PM

Quote:

Originally Posted by torr

Depending on your DME software version you have have to add one of the following to INPA.

MEVD17KW.IPO
MEVD172.IPO
MEVD176K.IPO

This is what worked for me, I have not tried MSD81 because I thought that was for the N54.

so how exactly you do this to add n55 msd81 option to inpa?

torr · 02-07-2015, 10:11 PM

1. Navigate to C:\INPA\SGDAT. And make sure you have the 3 mevd***.ipo files I mentioned.

2. Now navigate to C:\INPA\CFGDAT

3. Open up E90.eng in notepad

4. You now want it to look like the following

< E90.ENG >
…
[ROOT_MOTOR]
DESCRIPTION=Engine
ENTRY= D50M47,DDE 5.0 for M47 TU,
ENTRY= DDE6M47,DDE 6.0 for M47 TU2,
ENTRY=,,
ENTRY= D50M57,DDE 5.0 for M57 TU,
ENTRY= DDE6M57,DDE 6 for M57TOP / M57TU2,
ENTRY=,,
ENTRY=ME9NG4TU,ME9.2 / MEV9 for N45 / N46,
ENTRY= MS450,MS 45.0 for M54,
ENTRY= MSV70,MSV 70.0 for N52 (NG6),
ENTRY= MSV80,MSV 80.0 for N52KP (NG6),
ENTRY= MSD80,MSD 80.0 for N43 N53 & N54 with EWS4/CAS,
ENTRY= Mevd176k, Mevd 176k for N55
ENTRY=,,
ENTRY= MSS60,MSS60 for S65 (M3),
ENTRY=,,
ENTRY=EKPM60_2,Fuel Pump EKP,
…

8. Add what's in large font above, using the correct mevd*** that applies to you
Make sure to use INPALOAD.

js335in54 · 02-09-2015, 12:06 PM

Quote:

Originally Posted by torr

1. Navigate to C:\INPA\SGDAT. And make sure you have the 3 mevd***.ipo files I mentioned.

2. Now navigate to C:\INPA\CFGDAT

3. Open up E90.eng in notepad

4. You now want it to look like the following

< E90.ENG >
…
[ROOT_MOTOR]
DESCRIPTION=Engine
ENTRY= D50M47,DDE 5.0 for M47 TU,
ENTRY= DDE6M47,DDE 6.0 for M47 TU2,
ENTRY=,,
ENTRY= D50M57,DDE 5.0 for M57 TU,
ENTRY= DDE6M57,DDE 6 for M57TOP / M57TU2,
ENTRY=,,
ENTRY=ME9NG4TU,ME9.2 / MEV9 for N45 / N46,
ENTRY= MS450,MS 45.0 for M54,
ENTRY= MSV70,MSV 70.0 for N52 (NG6),
ENTRY= MSV80,MSV 80.0 for N52KP (NG6),
ENTRY= MSD80,MSD 80.0 for N43 N53 & N54 with EWS4/CAS,
ENTRY= Mevd176k, Mevd 176k for N55
ENTRY=,,
ENTRY= MSS60,MSS60 for S65 (M3),
ENTRY=,,
ENTRY=EKPM60_2,Fuel Pump EKP,
…

8. Add what's in large font above, using the correct mevd*** that applies to you
Make sure to use INPALOAD.

i actually have only 1 file med176k.ipo, i dont have the rest as you mention , 2 other more files. i have full 53.3 daten and tries searching for them in there but nothing. do you know where i can get this files?

ridge_racer · 07-09-2016, 11:16 AM

torr,

If you only knew how much of a smile and a tear you put on my face man. I was up until 4AM and back up again at 9AM trying to get INPA to work with my N55. Then I googled the mevd176k and found your post. Works now and was able to clear a bunch of misfire codes however I can't change the language from German to English. Any help? Thx a million.

torr · 07-10-2016, 08:11 AM

This is not a perfect solution but it will work.

ridge_racer · 07-12-2016, 05:27 AM

Quote:

Originally Posted by torr

This is not a perfect solution but it will work.

It worked like you said. Not prefect but I can certainly work with it. Thanks again Torr

10-02-2014, 11:20 AM	#1
M.a.r.k.u.s Captain 314 Rep 929 Posts Drives: 2011 BMW 335i xDrive manual Join Date: Mar 2014 Location: Seattle iTrader: (2) Garage List 2014 Audi A6 Prestige [0.00] 2015 BMW X5 x-drive35i [0.00] 2016 BMW M3 [0.00]	N55 not showing up in INPA I haven't played around with INPA all that much until this past week and I've tried just about everything I can think of, searched all sorts of forums but can not seem to figure out why I don't have my engine (N55) as an option in INPA when I click on "engine". I have the newest Daten files (v53) and INPA version 5.0.1. I'm assuming it is setut wrong somehow. It'll connect to my car just fine and I can do most of the functional tests. If anyone has any ideas, I'd appreciate it. Thanks!
	Appreciate 0 Tweet Quote

10-02-2014, 05:37 PM	#6
wildcatcrazy Banned 522 Rep 1,527 Posts Drives: E90 335i Join Date: Oct 2013 Location: USA iTrader: (12) Garage List 2009 335i [0.00]	What version of INPA do you have?
	Appreciate 0 Quote

10-02-2014, 05:41 PM	#8
wildcatcrazy Banned 522 Rep 1,527 Posts Drives: E90 335i Join Date: Oct 2013 Location: USA iTrader: (12) Garage List 2009 335i [0.00]	Will it read errors if you click on functional jobs?
	Appreciate 0 Quote

02-04-2015, 09:59 AM	#15
fryj00 New Member 2 Rep 18 Posts Drives: 2011 E92 N55 xdrive 6MT Join Date: Nov 2014 Location: Pitttsburgh, PA iTrader: (0)	I could use the same help, if anyone is willing to send me that file. Thanks! -Bryan EDIT: Wait, shouldn't that be the msd81.prg file? Also, just to be clear, what path are you guys working with? I'd like to make sure that I'm looking in the right place. Last edited by fryj00; 02-04-2015 at 10:18 AM..
	Appreciate 0 Quote

02-07-2015, 10:40 AM	#16
torr Enlisted Member 11 Rep 49 Posts Drives: 2011 335I e92 Join Date: Apr 2013 Location: United States iTrader: (0)	Depending on your DME version you have have to add one of the following to INPA. MEVD17KW.IPO MEVD172.IPO MEVD176K.IPO This is what worked for me, I have not tried MSD81 because I thought that was for the N54. __________________ 2011 BMW 335i auto JB4 Stage 2, FF/wires, BMS Intake, Pure Stg2, Pure intake, +DV, Helix FMIC, AR DP, ER CP, Alpina Trans Flash. Last edited by torr; 09-01-2016 at 06:57 AM.. Reason: Grammer
	Appreciate 0 Quote

02-07-2015, 10:11 PM	#18
torr Enlisted Member 11 Rep 49 Posts Drives: 2011 335I e92 Join Date: Apr 2013 Location: United States iTrader: (0)	1. Navigate to C:\INPA\SGDAT. And make sure you have the 3 mevd*.ipo files I mentioned. 2. Now navigate to C:\INPA\CFGDAT 3. Open up E90.eng in notepad 4. You now want it to look like the following < E90.ENG > … [ROOT_MOTOR] DESCRIPTION=Engine ENTRY= D50M47,DDE 5.0 for M47 TU, ENTRY= DDE6M47,DDE 6.0 for M47 TU2, ENTRY=,, ENTRY= D50M57,DDE 5.0 for M57 TU, ENTRY= DDE6M57,DDE 6 for M57TOP / M57TU2, ENTRY=,, ENTRY=ME9NG4TU,ME9.2 / MEV9 for N45 / N46, ENTRY= MS450,MS 45.0 for M54, ENTRY= MSV70,MSV 70.0 for N52 (NG6), ENTRY= MSV80,MSV 80.0 for N52KP (NG6), ENTRY= MSD80,MSD 80.0 for N43 N53 & N54 with EWS4/CAS, ENTRY= Mevd176k, Mevd 176k for N55 ENTRY=,, ENTRY= MSS60,MSS60 for S65 (M3), ENTRY=,, ENTRY=EKPM60_2,Fuel Pump EKP, … 8. Add what's in large font above, using the correct mevd* that applies to you Make sure to use INPALOAD. __________________ 2011 BMW 335i auto JB4 Stage 2, FF/wires, BMS Intake, Pure Stg2, Pure intake, +DV, Helix FMIC, AR DP, ER CP, Alpina Trans Flash.
	Appreciate 2 Nick.B55.50 YuCrew1.50 Quote

07-09-2016, 11:16 AM	#20
ridge_racer New Member 0 Rep 14 Posts Drives: 2011 BMW 335i xDrive Join Date: May 2014 Location: Brooklyn, NY iTrader: (0)	torr, If you only knew how much of a smile and a tear you put on my face man. I was up until 4AM and back up again at 9AM trying to get INPA to work with my N55. Then I googled the mevd176k and found your post. Works now and was able to clear a bunch of misfire codes however I can't change the language from German to English. Any help? Thx a million.
	Appreciate 0 Quote