|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E90 inner brake light issue. Coding?
|
|
02-15-2019, 12:04 PM | #1 |
Second Lieutenant
99
Rep 237
Posts |
E90 inner brake light issue. Coding?
Hi Guys,
I've only just discovered this part of the forum. I'm in New Zealand and wasn't aware there was an Australian section. I posted this thread in the main forum so thought i would repost here to see if any of you could help me with this one possibly. I have noticed on my car that only the outer brake light works on both sides. No CC faults, no faults stored when i scanned with ISTA. When i activate the brake lights via the ISTA test module, both the inner and outer lights work (as i think they should) I have checked 3 other E90s and they are all the same, only the outer brake light works. I am thinking this could be a coding issue forthe Japan region? My car is a Japanese import as are most cars over here. Wondering if one of you guys could have a quick check of your pre LCI E90s and let me know if yours is the same? Then maybe we could compare FRM.TRC files. I had a quick look at the FRM.TRC files and found RL_L_ BREMS_ FKT and changed that from not active to active but that didn't do anything. Thanks heaps in advance. |
02-16-2019, 03:50 AM | #3 |
Lieutenant Colonel
729
Rep 1,815
Posts |
What values did you change? You posing the changes could help someone in the future.
Sharing is caring.
__________________
2009 118i Monaco Blue "Maximillion"
2009 335i Saphire Black M Sport "Leopold" Cobb stage 2 aggressive tune, Mishimoto FMIC, Cobb charge pipe, Cobb catted down pipes, Forge diverter valves, BMS inlets and DCI, Cyba scoops and M Individual Audio retrofit and M3 gauge cluster retrofit. 2011 328i Titan Silver M Sport "Franzel" <--Wife's car |
Appreciate
0
|
02-16-2019, 04:23 AM | #4 |
Lieutenant Colonel
480
Rep 1,600
Posts |
It would be the parameter along the lines of "brake force display"
ie. the inner globes only light up once you generate a certain pressure using your foot. |
Appreciate
1
N52bigblock98.50 |
02-16-2019, 02:11 PM | #5 |
Second Lieutenant
99
Rep 237
Posts |
Well since I'm a sharing and caring Kiwi I'm more than happy to share what i changed. First i made a copy of my original file in case a f'ed something up. Then after a bit of trial and error i found it was the BFD_BREMSL_FKT changed it from NICHT_AKTIV to AKTIV
Last edited by N52bigblock; 02-16-2019 at 02:27 PM.. |
Appreciate
2
david in germany729.00 Gtech1.50 |
Bookmarks |
|
|