[sid21177]

needs to be coded in - i did mine - pretty simple

[crypticc]

Why coding? Euro spec cars have a menu on the BC stalk. Menu Only appears if stationary.

Then if you want DRL on, turn on. If you just want angel eyes turn DRL of then put light switch to appropriate position manually.

[King_Kroeplin81]

Originally Posted by crypticc

Why coding? Euro spec cars have a menu on the BC stalk. Menu Only appears if stationary.

Then if you want DRL on, turn on. If you just want angel eyes turn DRL of then put light switch to appropriate position manually.

Will this work with 2010 328I non xenon? I have the halogen, but think im going to upgrade the AE's to the LUX. Thanks!

[Clammy]

Originally Posted by Ken07335i

It was in my manual. I set the angel eyes as my daytime running lights - no special coding. I can then turn my switch one position to the right to light up my orange corners and my tail lights if I want with my angels running.

I've looked through my manual, and I can't find where it describes that. Can you please tell me what page you found that info on?

Thanks.

Cheers!

[pweber]

Originally Posted by SINasTER

Not sure about american models, but here in Canada you have to get it coded to be able to have AE's as DRL for model years '06 to March 09

Seems that there was too many drivers who were imbecile enough to drive with only the corner lights on that the government made it mandatory to be visible enough even during the day... Thanks to stupid drivers, we must have an ugly light setup enable

Yes this same is in American cars, but last time I couldn't do it.

In m car (EU) I can active this easlie changing these three lines in NFRM:

VERHALTEN_DRL_TFL
drl_s

PWM_FL_FKT_DRL
wert_02

TAGFAHRLICHT_ECE_1
aktiv

I did this same in American car and it doesn't work.
Maybe someone has some suggestion?