[lolligaggins]

Thanks for the write-up! cant wait to black out the front end.

[BRAISKI]

Finally I found this! This will come very handy...

I will be removing my front bumper this weekend to install the HID fog lights...

[Elliott@DetailAddict]

I got the hang of the headlight washer removal and reattachment. A great little trick too.
Took mine off and then on no sweat.

Much easier without the wheels on

[AndreyT]

According to some other DIYs I saw on the net, it is sufficient to remove like only 3 bolts in each wheel well in order to pull away the wheelarch lining and get access to those hidden 2 bolts. This DIY requires removing like 6 bolts in the left well and 10 bolts in the right well (the same 6 plus 4 more for the oil cooler grille). Is it really necessary to remove all these bolts?

For example, this DIY - http://www.e90post.com/forums/showthread.php?t=16992 - claims that only 2 bolts need to be removed in each wheel well before we can pull aside wheelarch lining. The bumper removal guide at umnitza also says that only two bolts have to be removed on the fender liner. (Interestingly, this gude says that the hoidden bolts are 8mm, while umnitza guide says that they are 10mm).

[holmes011]

would anyone not reccomend taking a paper towel and maybe water and wiping down the intercooler/ air ducts if they are dirty, or maybe just a dry paper towel. i was thinking about doing that but idk if it would be bad to do or not...thanks

[end1roy]

Originally Posted by RRGOO7

nice writeup man but why did you remove the bumper?

I was thinking the same thing

[Laid Black 335i]

OP... can you rehost the pictures???? I need to remove my bumper tomorrow!

[johej]

Oh. Darn.
The pics doesn't work anymore. :-/

I am planning to do this job within a month or two.

Is there any chance you could fix the pictures?
Thanks

[whoisthat]

Awesome write up - thank you

Question - do you need to remove the entire bumper in order to take the lower side grills out? Or is this something I could do with the bumper on by simply pushing down on the tabs that hold it on?

Thanks

[Najt]

can somebody upload that pictures or pdf ?

[whoisthat]

here's the photos:

http://www.billswebspace.com/e92FrontBumperRemoval.htm

Anyone take out the lower grills??? Do you need to remove the bumper completely to do so?

[gunda]

hey some of the images are no longer showing, can you repost the pictures in this DIY please

[gunda]

nvm I see the link you posted

[BayMoWe335]

Any way to change fog light housing (whole assembly) without removing the entire bumper?

[Bekoooz]

[mazzlyk]

nice work man, thanks