[335iCruzer]

Hey guys I have a 2008 bmw 335i around 126k miles. My service engine light came on and it said, misfiring in 1 and 3 and several cylinders. The car was having rough idling and shaking when starting it up. I replaced the spark plugs and ignition coils and it ran smooth for a bit and then the shaking came back and my engine light came on. Read the codes with Carly and now it's saying 1,2,3 are misfiring. Any idea on what it could be?

[NinetyEight740]

Any of the spark plugs black or wet when you removed them? If so, leaking injector.

[tello2020]

HI I have the same problem 2007 bmw 335i
misfiring cylinders 1 2 3 change spark plugs,switch coils and injectors, from bank 2.
new o2 sensor bank 1 before cat, any one had this problem before?

[335iCruzer]

Originally Posted by tello2020

HI I have the same problem 2007 bmw 335i
misfiring cylinders 1 2 3 change spark plugs,switch coils and injectors, from bank 2.
new o2 sensor bank 1 before cat, any one had this problem before?

Originally Posted by tello2020

HI I have the same problem 2007 bmw 335i
misfiring cylinders 1 2 3 change spark plugs,switch coils and injectors, from bank 2.
new o2 sensor bank 1 before cat, any one had this problem before?

FIXED! Ended up replacing the fuel injectors! When I replaced them they were black or oily. Once I replaced it, my BMW stop shaking and having rough idle. Also had it walnut blasted because it was so much built up in the intake.

[tello2020]

Originally Posted by 335iCruzer

FIXED! Ended up replacing the fuel injectors! When I replaced them they were black or oily. Once I replaced it, my BMW stop shaking and having rough idle. Also had it walnut blasted because it was so much built up in the intake.

hello did you replacing all 6 injectors new or only 3 from bank 1?
what I did I switch injectors from bank 2 to bank 1 just to see if the codes change to bank 2 but still the same.

[335iCruzer]

Originally Posted by tello2020

hello did you replacing all 6 injectors new or only 3 from bank 1?
what I did I switch injectors from bank 2 to bank 1 just to see if the codes change to bank 2 but still the same.

I replaced injectors 1-3 because that's where my problem was for misfiring.

[tello2020]

Originally Posted by 335iCruzer

I replaced injectors 1-3 because that's where my problem was for misfiring.

I thought that changing the injectors from bank 2 to bank 1 would jump
the check engine to cylinders 4 5 6 but no, am not sure if my problem are the injectors, you bought new injectors where you bought them.

[335iCruzer]

Originally Posted by tello2020

I thought that changing the injectors from bank 2 to bank 1 would jump
the check engine to cylinders 4 5 6 but no, am not sure if my problem are the injectors, you bought new injectors where you bought them.

Originally Posted by tello2020

I thought that changing the injectors from bank 2 to bank 1 would jump
the check engine to cylinders 4 5 6 but no, am not sure if my problem are the injectors, you bought new injectors where you bought them.

So like your current issue my BMW was misfiring. I replaced the coils and spark plugs, and that fixed the misfiring for maybe a week. The rough idle came back and I got CEL light again. I then knew replacing those didn't fix the issue so I replaced the injectors and haven't had a issue since. I bought them off FCPEURO.COM lifetime warranty and if for some reason that doesn't fix your issue they have hassle free returns and everything is OEM.

[tello2020]

Originally Posted by 335iCruzer

So like your current issue my BMW was misfiring. I replaced the coils and spark plugs, and that fixed the misfiring for maybe a week. The rough idle came back and I got CEL light again. I then knew replacing those didn't fix the issue so I replaced the injectors and haven't had a issue since. I bought them off FCPEURO.COM lifetime warranty and if for some reason that doesn't fix your issue they have hassle free returns and everything is OEM.

I will try to change to new injectors
thank you.