[najericam]

Hey guys, I was just coding some stuff on my e93 and wanted to do some coding on DSC module, but I'm missing some options when I read it. Any guess?

This is all I get:

SZL
wert_05
C0D_ASL
wert_00
C0D_BAUART
wert_08
C0D_BBV
wert_00
C0D_BBV_KORR_HA
wert_00
C0D_BBV_KORR_VA
wert_01
C0D_BTM
wert_00
C0D_CBC
wert_00
C0D_CF_ESM_HB
wert_00
wert_01
C0D_CF_ESM_LB
wert_00
wert_01
C0D_CR_ESM_HB
wert_00
wert_01
C0D_CR_ESM_LB
wert_00
wert_01
C0D_DBC_MIN_AUSLOESEDRUCK
wert_00
C0D_DELTA_PSI_BETA_LIMIT
wert_02
C0D_DIFF_LOCK
wert_00
wert_01
C0D_DRUCKMODELL_HA
wert_03
C0D_DRUCKMODELL_VA
wert_04
C0D_FLR
wert_01
C0D_GETRIEBE
wert_00
C0D_GMB
wert_00
C0D_GMR_MAX_LIMIT_SCHRAEG
wert_00
C0D_GMR_MIN_LIMIT_SCHRAEG
wert_00
C0D_KUEHLSCHACHT
wert_02
C0D_LCL
wert_00
C0D_LENKWINKELKENNLINIE
wert_00
wert_01
C0D_LF_ESM
wert_00
wert_01
C0D_LR_ESM
wert_00
wert_01
C0D_LUEFTER
wert_00
C0D_LWK_X2
wert_00
wert_01
C0D_LWK_X3
wert_00
wert_01
C0D_LWK_X4
wert_00
wert_01
C0D_LWK_Y1
wert_00
wert_01
C0D_LWK_Y2
wert_00
wert_01
C0D_LWK_Y3
wert_00
wert_01
C0D_LWK_Y4
wert_00
wert_01
C0D_M_ESM
wert_00
wert_01
C0D_MIN_DRUCKAUFBAU_GRAD
wert_00
C0D_MOTOR
wert_00
C0D_PRE_MSR
wert_00
C0D_PRE_USC
wert_00
C0D_RPA
wert_00
C0D_RPA_SCHWELLE
wert_00
wert_02
C0D_SC_X_ESM
wert_00
wert_01
C0D_SC_Y_ESM
wert_00
wert_01
C0D_SDR_CTC
wert_00
C0D_SPURWEITE
wert_00
wert_01
C0D_THETA_ESM
wert_00
wert_01
C0D_UEBERSTEUERN_MUE_0
wert_00
wert_02
C0D_UEBERSTEUERN_MUE_1_2
wert_01
C0D_UNTERSTEUERN_MUE_0
wert_00
C0D_UNTERSTEUERN_MUE_1_2
wert_00
C0D_UNTERSTEUERSCHWELLE
wert_00
wert_02
C0D_WLC
wert_01
C0X_C8
wert_02

[sdbmwcoding]

What do you want to do to the dsc module?

[najericam]

I was looking into changing cruse control from MPH to KMH, from forums I got it it's in DSC module. Also, my Auto SS wont work, and also I found that to be here, maybe someone coded it to nicht_active. When I write any module to car, I get .trc file in WORK folder that is ~230kb (usualy when I read separate modules they vary from 2 to 35kb) in size and contains values for all modules I guess as here I can find all those values. So they show somwhere, but not when I read DSC. :/

[sdbmwcoding]

Originally Posted by najericam

I was looking into changing cruse control from MPH to KMH, from forums I got it it's in DSC module. Also, my Auto SS wont work, and also I found that to be here, maybe someone coded it to nicht_active. When I write any module to car, I get .trc file in WORK folder that is ~230kb (usualy when I read separate modules they vary from 2 to 35kb) in size and contains values for all modules I guess as here I can find all those values. So they show somwhere, but not when I read DSC. :/

What's your dsc module? DSC_89.C03?

[najericam]

ECU short: DSC
CBD name: MK60_87.C03

If is of any help...

[najericam]

Anyone anything? I was also looking for Auto S/S which should be in DSC but is not there (SST).

I noticed once when I code any module, *.TRC file will change in size, one that I get when I read particular module. So when I read it it few KB in size 2, 5, 32. I save it as *,MAN and flash it back to module but at that point *.TRC will change in size and contain what I believe option of all module, as if I search it I can see options from various modules, even one that are missing from my DSC. So I guess they are somewhere there... Any good soul to help me out here?

P.S. My Auto S/S is not kicking in and no fault codes what so ever and battery seems to be fine, so I think maybe someone disable it, but as I don't have it in DSC I have no idea how to code it back. Also if I search for SST in mentioned *.TRC file I can find it and is saying nicht_aktiv - so another hint that might be disabled. Thanks.