|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
My serpentine belt last all of 8 days
|
|
11-07-2018, 06:17 PM | #1 |
Captain
79
Rep 996
Posts |
My serpentine belt last all of 8 days
I lost my serpentine belt on 29 Oct so I replaced it on the 30th.
Today just after leaving out of my work's parking lot, I lost power steering. I stopped and lifted the hood to see another shredded serpentine belt. Seriously, what could have caused this? |
11-07-2018, 06:40 PM | #3 |
Major General
4276
Rep 9,206
Posts |
Power steering mounting bolt on oil pan loose or missing? Tensioner?
|
Appreciate
2
N54Society448.50 |
11-07-2018, 08:29 PM | #4 |
Captain
647
Rep 779
Posts |
The above, plus check motor mounts/pulley clearance. When motor mounts sink, the belt/pulley can contact the subframe and will continue to shred belts. If neither belt was sucked through the front main seal either time, count yourself extremely lucky and fix the problem before installing another. Replace the tensioner with the belt if you haven't, check that all pulley bolts are tight and that the pulleys are in alignment.
|
11-07-2018, 08:37 PM | #5 |
Captain
79
Rep 996
Posts |
I was able to get a new belt tonight but I had to order the tensioner. The tensioner won't be here until Monday. Tomorrow will check for everything that has been mentioned here.
Note: From what I can see, the belt is still intact but it is missing a rib. |
11-07-2018, 09:59 PM | #7 |
Captain
79
Rep 996
Posts |
The left idler pulley does not rotate when I roll it. Could this have caused my belt to shred?
I cannot get the embeded video to play. youtube.com/watch?v=jJBlBePt268 Last edited by oilcrankinject; 11-08-2018 at 06:09 AM.. |
Appreciate
0
|
11-07-2018, 11:39 PM | #8 |
Major Private First Class
449
Rep 1,327
Posts
Drives: 2010 E90 335i M Sport
Join Date: Mar 2014
Location: US, NA, Earth, Milky Way Galaxy
|
Video doesn't show.
__________________
2008 E92 335i 6MT: FBO + MMP Silicone Inlets | Stage 1 LPFP | 335is clutch + MFactory SMFW | Custom BuraQ + MHD tune | 3.5Bar N20 sensor [SOLD]
2010 E90 335i M-Sport AT: 5" Stepped FMIC, Stage 2 LPFP - MHD V7 E60 Tune running 100% E85 - VRSF DPs |
Appreciate
0
|
11-08-2018, 06:55 AM | #10 | |
Lieutenant
132
Rep 573
Posts |
Quote:
it probably has belt pieces stuck behind it that why it doens't spin. I would recommend taking everything off and check the bracket as suggested. Last edited by Supra2k6; 11-08-2018 at 07:11 AM.. |
|
Appreciate
0
|
Bookmarks |
|
|