DIY: Setup BMW Standard Tools 2.12 on Windows XP > 10

LHLK · 03-09-2016, 09:41 AM

Quote:

Originally Posted by wildcatcrazy

(2) battery tender is not necessarily needed while coding or troubleshooting as long as you can start your car often. Whatever codes/values will be present while running and not running (except values like live data obviously)
(3) not that I'm aware of... The numbers are listed on top of the injectors.

Thanks for your prompt reply. "The numbers are listed on top of the injectors" do you mean looking at the physical injectors? What I like to know is whether or not I could using the INPA to gather the injectors part number like (press F2?) where I know ahead of time and preparing what type of injectors needed to replace or so...thanks.

wildcatcrazy · 03-09-2016, 06:48 PM

Quote:

Originally Posted by LHLK

Thanks for your prompt reply. "The numbers are listed on top of the injectors" do you mean looking at the physical injectors? What I like to know is whether or not I could using the INPA to gather the injectors part number like (press F2?) where I know ahead of time and preparing what type of injectors needed to replace or so...thanks.

I'm only aware of physically verifying the numbers by looking at the injectors.

yycyyc · 03-13-2016, 02:40 PM

I want to update the transmission software. I have install the tool 2.12 and done all the job following your install instructions. But I do not know which ecu is for transmission, even I checked the UIF in INPA, it did not tell me JBBF, MER, EKP, EGS,,,,,, which is which. I just ignore it and go to the winpfk, and click update ZUSB, randomly select one, it shows the error 106, Error on setting ECU-ADDRESS. If I click Enter ZUSB, and input any ZB number I found at UIF, it shows the error 704, Error on determining the ZB number! Code 3000, 995065.
Any help?

wildcatcrazy · 03-13-2016, 10:41 PM

Quote:

Originally Posted by yycyyc

I want to update the transmission software. I have install the tool 2.12 and done all the job following your install instructions. But I do not know which ecu is for transmission, even I checked the UIF in INPA, it did not tell me JBBF, MER, EKP, EGS,,,,,, which is which. I just ignore it and go to the winpfk, and click update ZUSB, randomly select one, it shows the error 106, Error on setting ECU-ADDRESS. If I click Enter ZUSB, and input any ZB number I found at UIF, it shows the error 704, Error on determining the ZB number! Code 3000, 995065.
Any help?

For that, you're looking for GKE****. See which module your UIF for EGS pulls up, that's the one...

yycyyc · 03-13-2016, 11:09 PM

Thank you. I checked in INPA and found the EGS ZB no. is 7564084. However, I go to the EC-APP>NFS>DATA>GKE211 I found A7564083, the next is 7564087, there is no 7564084.

Before I saw your reply, I tried the GKE233, update in WinKFP. It showed ECU>ZBNr from UIF XXXXXX to 7572903. After update, there are Brake, ABS, 4X4 lights on. I also tried the GKE211, the same information, Brake, ABS, 4X4 lights on off, then light again. Drive the car outside for few minutes, the transmission jerk from 2nd to 1st gear still exists. So sad.

I can see GKE 211， GKE 233 .... Should I update all of them?
If not, where is the problem? Thank you.

Quote:

Originally Posted by wildcatcrazy

For that, you're looking for GKE****. See which module your UIF for EGS pulls up, that's the one...

wildcatcrazy · 03-14-2016, 10:34 PM

Quote:

Originally Posted by yycyyc

Thank you. I checked in INPA and found the EGS ZB no. is 7564084. However, I go to the EC-APP>NFS>DATA>GKE211 I found A7564083, the next is 7564087, there is no 7564084.

Before I saw your reply, I tried the GKE233, update in WinKFP. It showed ECU>ZBNr from UIF XXXXXX to 7572903. After update, there are Brake, ABS, 4X4 lights on. I also tried the GKE211, the same information, Brake, ABS, 4X4 lights on off, then light again. Drive the car outside for few minutes, the transmission jerk from 2nd to 1st gear still exists. So sad.

I can see GKE 211， GKE 233 .... Should I update all of them?
If not, where is the problem? Thank you.

Quote:

Originally Posted by wildcatcrazy

For that, you're looking for GKE****. See which module your UIF for EGS pulls up, that's the one...

Using WinKFP in comfort mode, enter your original ZUSB and see which module it picks. Then go to update ZUSB, then select the module it just showed you. That will update you to the latest version.

yycyyc · 03-14-2016, 11:11 PM

It said cannot determine the ZUSB. I checked, there is no 7564084 in GKE list (all verisions). I updated the GKE211 to the latest version. Transmission problem still exists. I also updated DSC, VGSG.

Today, I checked the error, cleared and read again, there are errors show under these three ECU (EGS, DSC, VGSG). I also got ABS/Brake/4X4 lights on.

Is the V57 not for 2006 325XI?

Quote:

Originally Posted by wildcatcrazy

Using WinKFP in comfort mode, enter your original ZUSB and see which module it picks. Then go to update ZUSB, then select the module it just showed you. That will update you to the latest version.

wildcatcrazy · 03-15-2016, 07:20 AM

Quote:

Originally Posted by yycyyc

It said cannot determine the ZUSB. I checked, there is no 7564084 in GKE list (all verisions). I updated the GKE211 to the latest version. Transmission problem still exists. I also updated DSC, VGSG.

Today, I checked the error, cleared and read again, there are errors show under these three ECU (EGS, DSC, VGSG). I also got ABS/Brake/4X4 lights on.

Is the V57 not for 2006 325XI?

Quote:

Originally Posted by wildcatcrazy

Using WinKFP in comfort mode, enter your original ZUSB and see which module it picks. Then go to update ZUSB, then select the module it just showed you. That will update you to the latest version.

In this case you'll need to open the .his file for each of the GKE*** versions until you find that specific ZB, as I'm sure the DATEN version you're currently running has an update. The .his file will show you the updated number.

LMB335IS · 03-15-2016, 03:45 PM

7564084 is listed in my data for GKE211.

J. Dub · 03-15-2016, 04:42 PM

Can we code anything with the car on? This way battery will never die?

wildcatcrazy · 03-15-2016, 04:43 PM

Quote:

Originally Posted by J. Dub

Can we code anything with the car on? This way battery will never die?

Yes. You just can't flash some of the modules while car is running.

yycyyc · 03-15-2016, 07:47 PM

Which Version daten do you have? V57? Thank you.

Quote:

Originally Posted by LMB335IS

7564084 is listed in my data for GKE211.

LMB335IS · 03-15-2016, 08:21 PM

Quote:

Originally Posted by yycyyc

Which Version daten do you have? V57? Thank you.

Yes, 57.0. Look in your C:\E89\data\GKE211\GKE211.HIS. Open the .his file with notepad and use the find function. Should look exactly like my screen shot. Your old ZB doesn't show in WinKFP but the updated one, ZB# 7572903 shows. Comfort mode. choose ZUSB, pick GKE211, scroll through ZB #s and it's there.

dudemclovin · 03-21-2016, 02:12 AM

wildcatcrazy your coding DIY is awesome! I really appreciate the time you took to create it.

Could you pm me the most recent daten files for e89? I'm rocking a 2007 e90. I tried your .txt link to the Mega site but the download never seemed to work.

Thanks!

wildcatcrazy · 03-21-2016, 07:42 AM

Quote:

Originally Posted by dudemclovin

wildcatcrazy your coding DIY is awesome! I really appreciate the time you took to create it.

Could you pm me the most recent daten files for e89? I'm rocking a 2007 e90. I tried your .txt link to the Mega site but the download never seemed to work.

Thanks!

That link is the most current (v57).

ohh EPiC FAiL · 03-25-2016, 03:17 PM

i've attempted to download from mega several times, through safari as well as chrome with the mega extension, and it gets to 95% and just stops. anyone have any tips to get it to work? i'm on a mac, but will run the software thru a virtual machine. i'm trying to download it through IE on my virtual machine right now to see if it works but its going even slower than before.

bacardi198 · 03-25-2016, 05:32 PM

Quote:

Originally Posted by ohh EPiC FAiL

i've attempted to download from mega several times, through safari as well as chrome with the mega extension, and it gets to 95% and just stops. anyone have any tips to get it to work? i'm on a mac, but will run the software thru a virtual machine. i'm trying to download it through IE on my virtual machine right now to see if it works but its going even slower than before.

I also use a MBP, I recommend just using Chrome itself or finding a torrent. I haven't had any issues downloading using Chrome in lieu of Safari on my MacBook, and then transfer the files over to my Parallels VM to use.

AndyW · 03-25-2016, 06:13 PM

Got to 94% and failed....arg! LOL.

Stuck at 92%. Stopped, restarted. Now stuck at 90%. This is ridiculous.

wildcatcrazy · 03-26-2016, 08:03 AM

Quote:

Originally Posted by AndyW

Got to 94% and failed....arg! LOL.

Stuck at 92%. Stopped, restarted. Now stuck at 90%. This is ridiculous.

Try this one, I've hosted it on another server, but it doesn't include the install instructions yet.

http://www.mediafire.com/folder/a7jvirbs559ib

AndyW · 03-26-2016, 10:39 AM

Quote:

Originally Posted by wildcatcrazy

Try this one, I've hosted it on another server, but it doesn't include the install instructions yet.

http://www.mediafire.com/folder/a7jvirbs559ib

Thx, wildcat. It finally finished. Appreciate all the work you do in helping out the community with this. Is the v.57 Daten available anywhere else? Mega says it is "to big to reliably transfer" for the E89 file.

wildcatcrazy · 03-26-2016, 01:45 PM

Quote:

Originally Posted by AndyW

Quote:

Originally Posted by wildcatcrazy

Try this one, I've hosted it on another server, but it doesn't include the install instructions yet.

http://www.mediafire.com/folder/a7jvirbs559ib

Thx, wildcat. It finally finished. Appreciate all the work you do in helping out the community with this. Is the v.57 Daten available anywhere else? Mega says it is "to big to reliably transfer" for the E89 file.

I have a trimmed version as well that I can send you.

AndyW · 03-27-2016, 12:55 AM

Quote:

Originally Posted by wildcatcrazy

I have a trimmed version as well that I can send you.

Thx! Trying Chrome instead of Firefox. Seems to be working...I'll let you know if I need it.

03-13-2016, 02:40 PM	#223
yycyyc New Member 0 Rep 10 Posts Drives: BMW E90 Join Date: Mar 2016 Location: MILWAUKEE iTrader: (0)	I want to update the transmission software. I have install the tool 2.12 and done all the job following your install instructions. But I do not know which ecu is for transmission, even I checked the UIF in INPA, it did not tell me JBBF, MER, EKP, EGS,,,,,, which is which. I just ignore it and go to the winpfk, and click update ZUSB, randomly select one, it shows the error 106, Error on setting ECU-ADDRESS. If I click Enter ZUSB, and input any ZB number I found at UIF, it shows the error 704, Error on determining the ZB number! Code 3000, 995065. Any help? Last edited by yycyyc; 03-13-2016 at 06:45 PM..
	Appreciate 0 Quote

03-15-2016, 03:45 PM	#229
LMB335IS Sua Sponte 1297 Rep 2,848 Posts Drives: 2013 LMB 335is Join Date: May 2008 Location: FOB FL iTrader: (21) Garage List 2013 BMW 335is [8.84]	7564084 is listed in my data for GKE211. __________________ 335is/DCT-M3 GTS software-M3 drivetrain-M3 GWS-KOMBI-DSC-SZL/MHD/BQ Tuning IG@ClustersandCoding Last edited by LMB335IS; 05-12-2017 at 06:23 PM..
	Appreciate 0 Quote

03-15-2016, 04:42 PM	#230
J. Dub Bob Saget 354 Rep 2,230 Posts Drives: 2010 335i e92 N54 A/T Join Date: Jun 2010 Location: AR - 501 iTrader: (15)	Can we code anything with the car on? This way battery will never die? __________________ In memory of Robert E. Flynn (AR)
	Appreciate 0 Quote

03-21-2016, 02:12 AM	#234
dudemclovin Registered 0 Rep 1 Posts Drives: '07 BMW 328i Join Date: Jan 2016 Location: Portland, OR iTrader: (0)	E89 Daten Request wildcatcrazy your coding DIY is awesome! I really appreciate the time you took to create it. Could you pm me the most recent daten files for e89? I'm rocking a 2007 e90. I tried your .txt link to the Mega site but the download never seemed to work. Thanks!
	Appreciate 0 Quote

03-25-2016, 03:17 PM	#236
ohh EPiC FAiL Private 3 Rep 59 Posts Drives: '11 335i xDrive Join Date: Feb 2016 Location: KCMO iTrader: (0)	i've attempted to download from mega several times, through safari as well as chrome with the mega extension, and it gets to 95% and just stops. anyone have any tips to get it to work? i'm on a mac, but will run the software thru a virtual machine. i'm trying to download it through IE on my virtual machine right now to see if it works but its going even slower than before. Last edited by ohh EPiC FAiL; 03-25-2016 at 03:23 PM..
	Appreciate 0 Quote

03-25-2016, 06:13 PM	#238
AndyW Supreme Galactic Commander (one galaxy over...) 666 Rep 1,777 Posts Drives: '08 E93, '12 E82, '13 E93 M3 Join Date: Feb 2012 Location: Washington, USA iTrader: (5)	Got to 94% and failed....arg! LOL. Stuck at 92%. Stopped, restarted. Now stuck at 90%. This is ridiculous. __________________ Best, Andy '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune Last edited by AndyW; 03-26-2016 at 12:01 AM..
	Appreciate 0 Quote