To those that have installed the Injen intake...

bboy8282 · 01-04-2013, 11:39 AM

So i just recently got my injen intake installed by ltbmw so im sure the install was done right since they have prob done intake installs alot...my question is for those that have this intake...is the injen air duct suppose to be capable of moving around a little bit...or does it sit tight with no movement at all.

enrita · 01-04-2013, 05:05 PM

Tight

max_k20 · 01-04-2013, 05:33 PM

Mine sit tight as well. Really no movement at all or almost.

Mahhvinn · 01-04-2013, 06:08 PM

Mine wiggles a little.

Phillycheesesteak · 01-04-2013, 06:21 PM

my air duct wiggles also but my shop tighten it for me. So it sits alright it moves when i put some pressure on it. hope this helps

bboy8282 · 01-04-2013, 07:19 PM

Thank you for the responses guys...imma try to unscrew everything that holds the duct and then reinstall it and see if it still wiggles around

Xzach92X · 01-04-2013, 09:33 PM

Nice and tight and good choice best hot air intake imo atleast looks the best

olston84 · 01-05-2013, 07:22 AM

I installed mine and on the 335i only one screw will fit into the air duct I believe. But they do have that little support bracket on the side that suppose to sure it up a little. Mine's feel pretty secure.

imageautodetail · 01-05-2013, 11:20 AM

it will tighten down to where it is snug, but since it only has one screw it tends to loosen up a bit

bboy8282 · 01-05-2013, 05:01 PM

Ok so i got everything re-tightened and it seems to fit pretty good now with only slight movement...just wish the designer from injen used both screws and the bracket to hold it in place...that would prob fix the problem

Chefcg1 · 01-05-2013, 05:18 PM

Quote:

Originally Posted by bboy8282

Ok so i got everything re-tightened and it seems to fit pretty good now with only slight movement...just wish the designer from injen used both screws and the bracket to hold it in place...that would prob fix the problem

+1

hectic · 02-24-2013, 06:38 PM

Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!

jasonX · 02-24-2013, 07:24 PM

I run a titek charge pipe with a HKS bov and Injen intake clears it no problem.

Jeff@TopGearSolutions · 02-24-2013, 08:08 PM

Quote:

Originally Posted by hectic

Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!

Depends on the charge pipe used....

hectic · 02-25-2013, 10:51 AM

Quote:

Originally Posted by Jeff@TopGearSolutions

Depends on the charge pipe used....

I have an ETS charge pipe with a Tial bov. From looking at pics, I'm just not sure if the bend of the second injen intake pipe will clear the top of my bov.

bboy8282 · 02-25-2013, 10:06 PM

Itll clear...i have the same setup...injen intake and a ETS charge pipe with a tial bov

hectic · 02-26-2013, 11:57 PM

Quote:

Originally Posted by bboy8282

Itll clear...i have the same setup...injen intake and a ETS charge pipe with a tial bov

Thanks for the confirmation!

CaliE90 · 02-27-2013, 04:04 AM

Quote:

Originally Posted by hectic

Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!

I run the injen intake with the evolution racewerks chargepipe + tial bov. plenty of clearance.

Jmac1985 · 03-28-2013, 04:21 PM

Ive been looking around all day for a good price and location to get an injen intake here in So cal. Does anyone know of a good place to put one up at?? I called LTMW and girl there told me that she didnt know about prices and would have to call me back?? Come on now im tryn to buy a known product how do u not know about the products smh..anyways..can anyone out there hook up a mexican brotha up haha..

Jeff@TopGearSolutions · 03-28-2013, 04:32 PM

Quote:

Originally Posted by Jmac1985

Ive been looking around all day for a good price and location to get an injen intake here in So cal. Does anyone know of a good place to put one up at?? I called LTMW and girl there told me that she didnt know about prices and would have to call me back?? Come on now im tryn to buy a known product how do u not know about the products smh..anyways..can anyone out there hook up a mexican brotha up haha..

I can ship one to you? Shoot me an email.

Jmac1985 · 03-28-2013, 04:44 PM

Quote:

Originally Posted by Jeff@TopGearSolutions

I can ship one to you? Shoot me an email.

Would it be Injen cold air or short? what are we looking at in price/ eta/ shipping?

Jmac1985 · 03-28-2013, 05:26 PM

Quote:

Originally Posted by bboy8282

So i just recently got my injen intake installed by ltbmw so im sure the install was done right since they have prob done intake installs alot...my question is for those that have this intake...is the injen air duct suppose to be capable of moving around a little bit...or does it sit tight with no movement at all.

Were did you get your intake from..Im not having any luck finding a place with a good price n location here in so cal..

01-04-2013, 11:39 AM	#1
bboy8282 First Lieutenant 25 Rep 394 Posts Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California iTrader: (1)	To those that have installed the Injen intake... So i just recently got my injen intake installed by ltbmw so im sure the install was done right since they have prob done intake installs alot...my question is for those that have this intake...is the injen air duct suppose to be capable of moving around a little bit...or does it sit tight with no movement at all.
	Appreciate 0 Tweet Quote

01-04-2013, 05:05 PM	#2
enrita Major General 159 Rep 7,378 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Tight __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

01-04-2013, 05:33 PM	#3
max_k20 Bavarian Love 24 Rep 263 Posts Drives: 230i xDrive Join Date: Mar 2012 Location: Quebec, Canada iTrader: (2)	Mine sit tight as well. Really no movement at all or almost. __________________ 08 FG2 Civic SI FBO - SOLD 09 E92 335i Xdrive FBO - SOLD 17 F22 230i Xdrive \| Alpine White \| Coral Red \| M-Sport \| BMS Intake \| JB4 \| 666M Rep \| M Carbon Mirrors \| Roof Rack \| Daily Driven
	Appreciate 0 Quote

01-04-2013, 06:08 PM	#4
Mahhvinn EUROPROJEKTZ 187 Rep 7,958 Posts Drives: backwards Join Date: Dec 2008 Location: San Jose, CA (Bay Area) iTrader: (15) Garage List 2008 E90 335i [7.00]	Mine wiggles a little. __________________ LTMW\|SPEEDELEMENT\|EUROPROJEKTZ #TeamStretchNPoke
	Appreciate 0 Quote

01-04-2013, 06:21 PM	#5
Phillycheesesteak DAMN 10 Rep 182 Posts Drives: f80 M3 Join Date: Mar 2011 Location: NYC iTrader: (3)	my air duct wiggles also but my shop tighten it for me. So it sits alright it moves when i put some pressure on it. hope this helps __________________ M3 ZCP
	Appreciate 0 Quote

01-04-2013, 07:19 PM	#6
bboy8282 First Lieutenant 25 Rep 394 Posts Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California iTrader: (1)	Thank you for the responses guys...imma try to unscrew everything that holds the duct and then reinstall it and see if it still wiggles around
	Appreciate 0 Quote

01-04-2013, 09:33 PM	#7
Xzach92X New kid on the block 4 Rep 131 Posts Drives: 09 335i coupe Join Date: Apr 2012 Location: Atlanta iTrader: (0) Garage List 2009 335i [10.00] 2009 E92 335i [0.00]	Nice and tight and good choice best hot air intake imo atleast looks the best __________________
	Appreciate 0 Quote

01-05-2013, 07:22 AM	#8
olston84 New Member 6 Rep 19 Posts Drives: 09 335i E90 BSM Join Date: Sep 2010 Location: Birmingham, AL iTrader: (0)	I installed mine and on the 335i only one screw will fit into the air duct I believe. But they do have that little support bracket on the side that suppose to sure it up a little. Mine's feel pretty secure. __________________ 09 E90 BSM\|Injen DCI\|ER Charge Pipe\|AR Downpipes\|AMS Intercooler\|Cobb V3\|BMW PE
	Appreciate 0 Quote

01-05-2013, 11:20 AM	#9
imageautodetail Captain 48 Rep 799 Posts Drives: 08 335 silverback Join Date: Nov 2010 Location: lou EVIL kentucky iTrader: (12) Garage List 2008 335 e90 [0.00] 2007 e90 335 [5.00]	it will tighten down to where it is snug, but since it only has one screw it tends to loosen up a bit __________________ FBO...METH...BIG TWINS
	Appreciate 0 Quote

01-05-2013, 05:01 PM	#10
bboy8282 First Lieutenant 25 Rep 394 Posts Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California iTrader: (1)	Ok so i got everything re-tightened and it seems to fit pretty good now with only slight movement...just wish the designer from injen used both screws and the bracket to hold it in place...that would prob fix the problem
	Appreciate 0 Quote

02-24-2013, 06:38 PM	#12
hectic Private First Class 9 Rep 118 Posts Drives: 335i xDrive Join Date: Aug 2012 Location: Massachusetts iTrader: (3)	Are any of you using this intake with a charge pipe/bov? Wondering if it clears my Tial bov. Thanks in advance!
	Appreciate 0 Quote

02-24-2013, 07:24 PM	#13
jasonX First Lieutenant 35 Rep 389 Posts Drives: 13 335is 6MT Join Date: Jun 2010 Location: Central NJ iTrader: (6)	I run a titek charge pipe with a HKS bov and Injen intake clears it no problem.
	Appreciate 0 Quote

02-25-2013, 10:06 PM	#16
bboy8282 First Lieutenant 25 Rep 394 Posts Drives: BMW 335i Join Date: Feb 2010 Location: Pasadena, California iTrader: (1)	Itll clear...i have the same setup...injen intake and a ETS charge pipe with a tial bov
	Appreciate 0 Quote

03-28-2013, 04:21 PM	#19
Jmac1985 Registered 0 Rep 3 Posts Drives: 2011 E92 328I Join Date: Mar 2013 Location: SAN BERNARDINO CA iTrader: (0)	I need an Injen Intake Ive been looking around all day for a good price and location to get an injen intake here in So cal. Does anyone know of a good place to put one up at?? I called LTMW and girl there told me that she didnt know about prices and would have to call me back?? Come on now im tryn to buy a known product how do u not know about the products smh..anyways..can anyone out there hook up a mexican brotha up haha..
	Appreciate 0 Quote