[tryingtobebest]

Originally Posted by Dtype

In that image seems to be a space between F8, 00.
Between comma and first 0.

LOL, what an eye!))) Im going back to garage? Do you think that might be the problem?

BUT that is what Sensible_ posted in that instruction message!

Tried it again with it FIXED and it still not written to cluster, quick check of 0x3105 In Tool shows same thing!

[Sensible_]

Sorry, just seen your message. I quickly wrote that nettodat on my phone. Dtype corrected the files. No spaces.

If job ends ok but no change then the profile is not suitable.

Use this one:

https://drive.google.com/open?id=0B0...kVqdERQZlBJYzg

Unzip to where your other profiles are. Then try again.

(Copy the *.PFL file to C:\NCSEXPER\PFL)

[tryingtobebest]

^ download and used your profile for coding, everything is exactly the same as with profile that ive used before throws this error and the says it was successful in writing!







then quick check in Tool32 showed me that nothing changed!



ill wait for 325TDS to try to do this on some other cars, but for now im out of luck!(

[Sensible_]

Originally Posted by tryingtobebest

^ download and used your profile for coding, everything is exactly the same as with profile that ive used before throws this error and the says it was successful in writing!







then quick check in Tool32 showed me that nothing changed!



ill wait for 325TDS to try to do this on some other cars, but for now im out of luck!(

Hmm, not sure why it's not working. Just tested it on my M3 cluster and it's working for me. I'll do some more checks and get back to you.

[Sensible_]

Also, have you performed the normal job coderien_lesen for the KOMBI before nettodat coding? I always do this as a matter of course. Not sure if it's required. But give it a go.

[Yngvejos]

Thanks for this great info.
Just coded my 05 325i to show oil temp. 0 = 50C, 5 = 75C, 10 = 100C, 15 = 125C, 20 = 175C.

[Sensible_]

Originally Posted by Yngvejos

Thanks for this great info.
Just coded my 05 325i to show oil temp. 0 = 50C, 5 = 75C, 10 = 100C, 15 = 125C, 20 = 175C.

Good work

[ruhl88]

Hi, is it possible to put water temp on mpg gauge with the same method?(I have a N47 motor)

[Sensible_]

Originally Posted by ruhl88

Hi, is it possible to put water temp on mpg gauge with the same method?(I have a N47 motor)

Alas no.

[Ibo24]

To bad this don't work on the 320d M47...

[PhotoGuy87]

Has anyone figured out how to make this work with the US Spec M57?

[Mik325tds]

Originally Posted by PhotoGuy87

Has anyone figured out how to make this work with the US Spec M57?

Unfortunately not. The problem is that the DDE transmits the oiltemp on the CAN bus as 0xFF (default value). I asked a tuner if he could find a switch for that in his cals but he couldn't find anything. I gave up after that.

[Dtype]

Originally Posted by Mik325tds

Unfortunately not. The problem is that the DDE transmits the oiltemp on the CAN bus as 0xFF (default value). I asked a tuner if he could find a switch for that in his cals but he couldn't find anything. I gave up after that.

But if we read on inpa oil temp, it must be communicated for some how. If we find that message, with a can blocker we can retransmit that message with any ID we want. Can someone read and send a message containing oil temp?
Thanks

[giustyle]

Originally Posted by Dtype

But if we read on inpa oil temp, it must be communicated for some how. If we find that message, with a can blocker we can retransmit that message with any ID we want. Can someone read and send a message containing oil temp?
Thanks

Other solution.. is possibile change address where Kombi read OIL temp with WATER temp?

If we can change (tool32) oil ID with water ID.. might work it?

[Dtype]

Originally Posted by giustyle

Other solution.. is possibile change address where Kombi read OIL temp with WATER temp?

If we can change (tool32) oil ID with water ID.. might work it?

But we need to know what address to change. And from to.

[giustyle]

Originally Posted by Dtype

But we need to know what address to change. And from to.

Maybe i found the address:







someone (with 6 cyil) can see with DR.GINI this address?

Thanks

[Dtype]

We need to know message id for oil temp to compare with messege that contains water temp.

[Terraphantm]

Originally Posted by Dtype

But if we read on inpa oil temp, it must be communicated for some how. If we find that message, with a can blocker we can retransmit that message with any ID we want. Can someone read and send a message containing oil temp?
Thanks

Not the same thing. When you read the oil temperature in INPA, INPA sends a message to the DME asking for the oil temp, and the DME sends the oil temp in a reply.

For the cluster, it's not a request being sent. The cluster looks for data that the DME/DDE broadcasts, and in the case of the Diesel cars, it's hardcoded to broadcast 0xFF. The only way you're going to get the oil temperature to be broadcast on that CAN message will be to modify the DDE software.

[Dtype]

Originally Posted by Terraphantm

Not the same thing. When you read the oil temperature in INPA, INPA sends a message to the DME asking for the oil temp, and the DME sends the oil temp in a reply.

For the cluster, it's not a request being sent. The cluster looks for data that the DME/DDE broadcasts, and in the case of the Diesel cars, it's hardcoded to broadcast 0xFF. The only way you're going to get the oil temperature to be broadcast on that CAN message will be to modify the DDE software.

Can we find it? Maybe someone have damos of ours dde.
Or grab that 0xFF and then do a relay with other ID.

[giustyle]

yes the cluster looks for data that the DME/DDE broadcasts, but i think that we can change address on kombi and komby looks water temp in dde

Sorry to my english

[Terraphantm]

Originally Posted by Dtype

Can we find it? Maybe someone have damos of ours dde.
Or grab that 0xFF and then do a relay with other ID.

With a full dump it wouldn't be super difficult to find the section of code that deals with the CAN messages, but the trick would be flashing the modified software back to the DDE.

I suppose you can stick something in bewteen the Kombi and K-CAN bus and modify the message before it gets to the kombi.

Originally Posted by giustyle

yes the cluster looks for data that the DME/DDE broadcasts, but i think that we can change address on kombi and komby looks water temp in dde

Sorry to my english

That's not NCS configurable. Might be possible to write custom software for the kombi (which would require an RSA defeat), but at that point you might as well just hack the DDE.

[Dtype]

Originally Posted by Terraphantm

With a full dump it wouldn't be super difficult to find the section of code that deals with the CAN messages, but the trick would be flashing the modified software back to the DDE.

I suppose you can stick something in bewteen the Kombi and K-CAN bus and modify the message before it gets to the kombi.

That's not NCS configurable. Might be possible to write custom software for the kombi (which would require an RSA defeat), but at that point you might as well just hack the DDE.

My first ideia is a can blocker to send a message with oil temp if.