[tsiconquest88]

What do you guys recomend? Im stage 2 plus mhd. Port injection etc. Stock turbos which may change. But point is what is it i buy? Im not into spending over 1k for clutch stuff i seen. Car is 2008. Thanks all. Its slipping on high rpm.

[EfiniMotorsport]

I'm running the Xclutch in mine and it's great. I'm FBO plus 19t turbos. I think the clutch was about $1200 though. There was a little rattle during break in from being a single mass flywheel but it's gone now.

[Cody335xi]

Originally Posted by tsiconquest88

What do you guys recomend? Im stage 2 plus mhd. Port injection etc. Stock turbos which may change. But point is what is it i buy? Im not into spending over 1k for clutch stuff i seen. Car is 2008. Thanks all. Its slipping on high rpm.

I'm planning on doing the same mods as you, fbo, mhd stg2+. I've done some research and any clutch that fits on a 335i will fit on the xi as well. I recommend the 335is clutch with the stock DMFW (dual mass flywheel) if your going to be sitting around 500hp and tq at the flywheel. Anything higher and you might wanna go for the spec stage 2+ or Stg 3+ but thats going to be more than $1000 for sure. If you do 335is and DMFW you'll be looking at about $1000. Heres everything you'll need to get it in the car. Also you could just resurface your flywheel but its not smart and i think people say it costs nearly the same to do that so might as well just get something new.

https://www.fcpeuro.com/products/bmw...uk-21207603248

https://www.fcpeuro.com/products/bmw...eel-oem-dmf112

https://www.fcpeuro.com/products/bmw...ew-21207548052

https://www.fcpeuro.com/products/bmw...et-23000417164

https://www.fcpeuro.com/products/bmw...lt-11227520706

https://www.fcpeuro.com/products/bmw...ol-83300495449

Gonna run you a total of 1023.92 pre-tax. and don't worry LUK is the manufacturer for BMW clutch so it saves you about $100 off the clutch alone, flywheel is about $400. Check the part numbers they match up.

[tsiconquest88]

I dont think i saw this sorry guys. Xclutch organic clutch it slips i did 561 torque i guess im redoing this clutch again. May go stage 2 disc they said 680 but may go twin disc. Sticking with xclutch i think though.