330i headers or intake manifold on 328i e92

BlackedOut · 07-10-2008, 10:24 PM

Hey guys,
I have a e92 328i
Mods done- Simota intake, cdv valve, B&M Short throw shifter, rear sway, Asanti rims, remus quad tip axel back exhaust, reger rear bumper, m-tec front bumper, jlevi's roof lid spoiler, m lip and H&R springs.
I am looking for my next mod already realized there's not a hell lot out there and was wondering if the 330 headers or intake manifold will fit on my 328i, any help would be great.
Thank you.

darkphantom · 07-10-2008, 11:57 PM

dunno man, running F/I here...check out the NA section

UdubBadger · 07-11-2008, 12:04 AM

try doing a

... we've gone over this like 30 times already. (sorry not trying to be a dick, I know you are not on here much)

the 330 intake manifold/reflash mod only works on the 325 right now. Turner says they are working on one for the 328 right now but nothing has come out yet. You might see a supercharger for the 328 before you see this one.

BayAreaE92 · 07-11-2008, 12:08 AM

It's been tried by someone on the board last I read. If you search u should be able to find the thread, and in short it didn't work out too well. Also, the good folks at Weatherford (Some of Them) told be there's much more too it than a Manifold Swap, such as the 330i ECU to manage the Tri-Flow/3-Stage Intake Manifold.

BayAreaE92 · 07-11-2008, 12:19 AM

BTW Where did you get your Simota Air Intake???

UdubBadger · 07-11-2008, 12:27 AM

Quote:

Originally Posted by BayAreaE92

It's been tried by someone on the board last I read. If you search u should be able to find the thread, and in short it didn't work out too well. Also, the good folks at Weatherford (Some of Them) told be there's much more too it than a Manifold Swap, such as the 330i ECU to manage the Tri-Flow/3-Stage Intake Manifold.

yeah... turner makes the whole package for like $4k and it works, but not on a 328 yet

UdubBadger · 07-11-2008, 12:28 AM

PS bay, you can get um at jlevisw.com for $399

i'm selling mine too but trying to go local 1st before offering to ship

BlackedOut · 07-11-2008, 12:31 AM

JLEVISW.COM its under the 325 330, it fits perfect no adjustments at all. However, it gives the car the perfect roar.

NaTuReB0Y · 07-11-2008, 12:41 AM

Quote:

Originally Posted by UdubBadger

try doing a

... we've gone over this like 30 times already. (sorry not trying to be a dick, I know you are not on here much)

the 330 intake manifold/reflash mod only works on the 325 right now. Turner says they are working on one for the 328 right now but nothing has come out yet. You might see a supercharger for the 328 before you see this one.

Lets be nice yo!

Bhorse · 07-13-2008, 03:27 AM

Quote:

Originally Posted by UdubBadger

try doing a

... we've gone over this like 30 times already. (sorry not trying to be a dick, I know you are not on here much)

the 330 intake manifold/reflash mod only works on the 325 right now. Turner says they are working on one for the 328 right now but nothing has come out yet. You might see a supercharger for the 328 before you see this one.

So did they come out with a supercharger yet?

Andro07 · 07-13-2008, 04:04 AM

Quote:

Originally Posted by BlackedOut

Hey guys,
I have a e92 328i
Mods done- Simota intake, cdv valve, B&M Short throw shifter, rear sway, Asanti rims, remus quad tip axel back exhaust, reger rear bumper, m-tec front bumper, jlevi's roof lid spoiler, m lip and H&R springs.
I am looking for my next mod already realized there's not a hell lot out there and was wondering if the 330 headers or intake manifold will fit on my 328i, any help would be great.
Thank you.

A lot of mods. You got any pic's of them?

MyE92 · 07-13-2008, 11:38 AM

Quote:

Originally Posted by BlackedOut

Hey guys,
I have a e92 328i
Mods done- Simota intake, cdv valve, B&M Short throw shifter, rear sway, Asanti rims, remus quad tip axel back exhaust, reger rear bumper, m-tec front bumper, jlevi's roof lid spoiler, m lip and H&R springs.
I am looking for my next mod already realized there's not a hell lot out there and was wondering if the 330 headers or intake manifold will fit on my 328i, any help would be great.
Thank you.

simp0man · 07-16-2008, 03:09 AM

I wonder if it is safte to get aftermarket headers for an e92 all aspired engine. Can the magnesium handle it?

Andrew@ET · 07-16-2008, 11:05 AM

handle headers lol... sorry but lol

07-10-2008, 10:24 PM	#1
BlackedOut New Member 1 Rep 25 Posts Drives: Jerez Black E90 M3 Join Date: Sep 2007 Location: Stamford, Ct iTrader: (0)	330i headers or intake manifold on 328i e92 Hey guys, I have a e92 328i Mods done- Simota intake, cdv valve, B&M Short throw shifter, rear sway, Asanti rims, remus quad tip axel back exhaust, reger rear bumper, m-tec front bumper, jlevi's roof lid spoiler, m lip and H&R springs. I am looking for my next mod already realized there's not a hell lot out there and was wondering if the 330 headers or intake manifold will fit on my 328i, any help would be great. Thank you.
	Appreciate 0 Tweet Quote

07-10-2008, 11:57 PM	#2
darkphantom Banned 595 Rep 5,946 Posts Drives: E93 335i Join Date: Aug 2007 Location: The place for Bimmers iTrader: (4)	dunno man, running F/I here...check out the NA section
	Appreciate 0 Quote

07-11-2008, 12:04 AM	#3
UdubBadger Banned 633 Rep 24,685 Posts Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs iTrader: (22) Garage List 2004 BMW 330i ZHP [9.50] 2011 135i [7.46] 2008 328xi [8.76]	try doing a ... we've gone over this like 30 times already. (sorry not trying to be a dick, I know you are not on here much) the 330 intake manifold/reflash mod only works on the 325 right now. Turner says they are working on one for the 328 right now but nothing has come out yet. You might see a supercharger for the 328 before you see this one.
	Appreciate 0 Quote

07-11-2008, 12:08 AM	#4
BayAreaE92 First Lieutenant 20 Rep 368 Posts Drives: 91' 850i Join Date: Dec 2007 Location: Oakland, CA iTrader: (0) Garage List 1991 850i [7.75] 2007 328i Coupe [0.00]	It's been tried by someone on the board last I read. If you search u should be able to find the thread, and in short it didn't work out too well. Also, the good folks at Weatherford (Some of Them) told be there's much more too it than a Manifold Swap, such as the 330i ECU to manage the Tri-Flow/3-Stage Intake Manifold.
	Appreciate 0 Quote

07-11-2008, 12:19 AM	#5
BayAreaE92 First Lieutenant 20 Rep 368 Posts Drives: 91' 850i Join Date: Dec 2007 Location: Oakland, CA iTrader: (0) Garage List 1991 850i [7.75] 2007 328i Coupe [0.00]	BTW Where did you get your Simota Air Intake???
	Appreciate 0 Quote

07-11-2008, 12:28 AM	#7
UdubBadger Banned 633 Rep 24,685 Posts Drives: '04 330i ZHP Join Date: Dec 2007 Location: Chicago Burbs iTrader: (22) Garage List 2004 BMW 330i ZHP [9.50] 2011 135i [7.46] 2008 328xi [8.76]	PS bay, you can get um at jlevisw.com for $399 i'm selling mine too but trying to go local 1st before offering to ship
	Appreciate 0 Quote

07-11-2008, 12:31 AM	#8
BlackedOut New Member 1 Rep 25 Posts Drives: Jerez Black E90 M3 Join Date: Sep 2007 Location: Stamford, Ct iTrader: (0)	JLEVISW.COM its under the 325 330, it fits perfect no adjustments at all. However, it gives the car the perfect roar.
	Appreciate 0 Quote

07-16-2008, 03:09 AM	#13
simp0man Not looking 2 SPEED, just looking GOOD 45 Rep 2,516 Posts Drives: 07 328i Join Date: Apr 2007 Location: Stockton, Ca iTrader: (1) Garage List 2007 328i [0.00]	I wonder if it is safte to get aftermarket headers for an e92 all aspired engine. Can the magnesium handle it? __________________
	Appreciate 0 Quote

07-16-2008, 11:05 AM	#14
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	handle headers lol... sorry but lol
	Appreciate 0 Quote