[m95roadster]

Originally Posted by Eturnulrs704

So in theory it should fit. Fine. Since from tip of climate control to the wood grain bottom it 110.mm and the bottom of the wood grain to the top of that lil section wear the climate switch/hazard button is 11mm. So that's roughly 121.04mm give or take. So that screen should fit spot on. And with a single din plate would be sure not to have to relocate the climate control and would garanty no spaces or holes will be seen behind the screen. Just my .02. ����*♂️

That Sony doesn't look like the RSX-GS9...

[Eturnulrs704]

Originally Posted by m95roadster

That Sony doesn't look like the RSX-GS9...

It's not. If you read the post you would see that those measurements where taken a good while ago. Either way. What's your point.?

[Eturnulrs704]

Originally Posted by m95roadster

That Sony doesn't look like the RSX-GS9...

My gs is actually in another car. Which I'm turning into an SQ build.. is that really a concern or are you just tryna be a low key dick?

[Eturnulrs704]

Originally Posted by scanspeak

Delivery of the Joying is expected in the next couple of days ...finally!

Cool. I'm here for it. Waiting to see what the end result is. Are you doing anything else to the car sound wise? Amps, speakers, processor? Or just the HU?

[m95roadster]

Originally Posted by Eturnulrs704

My gs is actually in another car. Which I'm turning into an SQ build.. is that really a concern or are you just tryna be a low key dick?

Maybe you should stay consistent in your posts.

https://www.e90post.com/forums/showthread.php?t=1715325

[m95roadster]

Originally Posted by Eturnulrs704

My gs is actually in another car.

Yes, of course it is. So you now have 2 E92s?

[Eturnulrs704]

Originally Posted by m95roadster

Yes, of course it is. So you now have 2 E92s?

Actually I don't. I have 3 E39 540is an e92 an Audi Q5 an Acura legend 2 door coupe and a bike. And a low tolerance for people
Being dicks when there are more important things to do with time. Ok Mr penis.

[Eturnulrs704]

And I'm glad u took time out or your day to search the forums for lil ole me.. and me saying what I have has nothing to do with what I have currently installed. So your telling me I need to have everything I say I have installed? How old Are u 10? Smh...

[Eturnulrs704]

So according to u. Just because I say I have these parts . Then I should have them all installed. Correct. ?🤦🏽*♂️ smh dumbass.. what I have and what I currently install are 2 different things. Grow up and stop stalking men's posts. Unless thats how you get off. 🤷🏽*♂️ I mean it is pride month. I don't judge. get back to the current topic missy this isn't our thread..

[Eturnulrs704]

Subs alone are 800. A piece and you're tryna be a smart ass about a 1500 head unit that I paid basically half the original price for? �������� As if it's a 5000.00 pice and I said I paid full price... My basement flooded with audio that I don't even use lady. what state you live in, cause it's clear that your state is still on lock down and you essentially have nothing else better to do with your time. Smh Antiman.

[PORTMOODY]

This video, seems to show the same fascia you're using. Doesn't appear to flow well with the contour of the dash.

In any case, still looking forward to your install.

[Eturnulrs704]

Originally Posted by PORTMOODY

This video, seems to show the same fascia you're using. Doesn't appear to flow well with the contour of the dash.

In any case, still looking forward to your install.

Yeah.. thats the thing I hate most for that facia.. BUT... I think there may be a work around.. I'm going to try it.. if you look at the Dynavin version of these units, they don't have the chin issues that these other Chinese units have.. one reason being, there is a lil material that needs to be removed where the bolt holes are.. then it sits flush. Also 99%of these faceplates are molded basically flat, so I'm going to try and use a heat gun and try to lightly bend it to fit. Hopefully I can bend it at the top careful not to warp it. This particular facia may present an ebev tougher challenge,but there are a few others that I think will give with better result. The one that OP wants may be a good candidate since it has a slight lift at the bottom. I will order one today just for testing and post my result. For that same of science 😂 and our own look.🤞

[Eturnulrs704]

Originally Posted by scanspeak

It's a BMW-specific upgrade from Focal so it mounts the same as the original equipment.

https://focalaustralia.com.au/product/1560/

So I'm sure you heard a difference in clarity. But how about volume? Is it much louder? Are you able to raise the volume past the point where the OEM driver's would start to give. I like clarity but in this car I want just a lil bit more in volume as well for that spirited driving. Going to feed about 1200 what's to these mids when they come. 🤷🏽*♂️😃 A lil over kill. 😏

[Eturnulrs704]

Maybe heat it from the back. Demelna lil 90 degree notch in the corner to help the bend give. So that it bends right at that blue point.

[Eturnulrs704]

I'm sure this one will work better since it's 2 parts and the aluminum can also be slightly bent to form..

[PORTMOODY]

Originally Posted by Eturnulrs704

I'm sure this one will work better since it's 2 parts and the aluminum can also be slightly bent to form..

No this one causes the climate control to extend down beyond where the fascia ends in stock config.

[dan4081]

Originally Posted by Eturnulrs704

Yeah.. thats the thing I hate most for that facia.. BUT... I think there may be a work around.. I'm going to try it.. if you look at the Dynavin version of these units, they don't have the chin issues that these other Chinese units have.. one reason being, there is a lil material that needs to be removed where the bolt holes are.. then it sits flush. Also 99%of these faceplates are molded basically flat, so I'm going to try and use a heat gun and try to lightly bend it to fit. Hopefully I can bend it at the top careful not to warp it. This particular facia may present an ebev tougher challenge,but there are a few others that I think will give with better result. The one that OP wants may be a good candidate since it has a slight lift at the bottom. I will order one today just for testing and post my result. For that same of science 😂 and our own look.🤞

The Dynavin units are slightly smaller than the Eonons (and other clones) because they don't have a built in DVD/CD player.
If Eonon would do away with that outdated tech they could make a better fitting unit.

[scanspeak]

Originally Posted by Eturnulrs704

So I'm sure you heard a difference in clarity. But how about volume? Is it much louder? Are you able to raise the volume past the point where the OEM driver's would start to give. I like clarity but in this car I want just a lil bit more in volume as well for that spirited driving. Going to feed about 1200 what's to these mids when they come. ����*♂️�� A lil over kill. ��

It's been years since I installed them so I don't really remember. I've never had them close to full volume and never heard them distort. I'm sure they will go significantly louder simply because they are a much higher quality unit.

[Eturnulrs704]

Originally Posted by dan4081

The Dynavin units are slightly smaller than the Eonons (and other clones) because they don't have a built in DVD/CD player.
If Eonon would do away with that outdated tech they could make a better fitting unit.

Agreed.. CD is definitely outdated. That would save ample amounts of space, and cost on manufacturers end, sending the savings to the consumer.

[Eturnulrs704]

Originally Posted by dan4081

The Dynavin units are slightly smaller than the Eonons (and other clones) because they don't have a built in DVD/CD player.
If Eonon would do away with that outdated tech they could make a better fitting unit.

This is true.. but I was thinking more so the depth instead of the length. I mean, if my theory is correct. The bottom will still be slightly longer, but it wouldn't protrude out as much.. will post a pic when I find it. So maybe we can debate it with a physical representation of what I'm thinking. I mean if we can correct this as much as possible,at least it wouldn't be so painful to look at.. lol.

[Eturnulrs704]

Can't find the actual post.. but this is the part that Dynavin says need to be cut away. It gives you a few mm but it does make a huge difference afterwards. It's the foam and vinyl/leather material over the screw hole. So after that's cut away with a razor the unit will sit further back.. if I find the post I will add it. It won't sit as far as Dynavin because they have a slight curve, but if heated we can replicate that curve slightly. (Hopefully) I couldn't believe how much a difference it made.

[Eturnulrs704]

Found it...
What do you guys think? Worth a shot? 🤷🏽*♂️